Satellite P105 (PSPA6A-02N021) - recovery disc restarts during installation

Similar Questions

• Satellite P105 (PSPA6A-02N021) - need to display drivers Windows 7

  Hi all

  I'm desperately looking for Windows 7 Ultimate 32 bit video drivers appropriate for the video chipset 7900GTX on my Satellite P105 (PSPA6A-02N021).

  The drivers I installed the work in terms of resolution, but the video performance is about 1/4 of what is normal. For example, if I run 3dMark2006, I used to get about 4000 points with XP Pro, however, I now get about 900 points, regardless of whether the drivers I am trying.
  (Please note, I used to have the same problems with XP Pro, when I tried the packs different driver and is around 3 that worked, being the standard Toshiba pulled out of the video drivers and 2 packs of www.laptopvideo2go.com (174.74 & 180.85 memory) driver).

  I tried the following driver packs:

  www.NVIDIA.com:
  179,48 BETA

  www.laptopvideo2go.com:
  174.74
  185,50

  Can someone give me some ideas on how to get this up & running at its normal capacity?

  The other thing to note is that most of the driver packs seem to recognize the 7900GTX as a NVS510?

  Any help would be appreciated!

  :(

  Hey Equinox74,

  I don't know which driver you are using now, but first we must forget this referral programs. In my opinion they said nothing about the performance, it's just good test the PC to find errors. Especially 3D Mark is quite different from real games because it uses another engine.

  In any case, your laptop, I have the Australian page-based and are therefore no Windows 7 driver available... Maybe you need to use the preinstalled operating system? ?:|

  By the way: on the Europe of Toshiba page, I created a similar model, Satellite P100 PSPA6E, so you can get a Windows 7 display driver:
  [http://eu.computers.toshiba-europe.com] > support & downloads > download drivers

  This driver is for nVidia and version 179.76 cards. Theoretically, this version should work for you too, it's worth a try! ;)

• Recovery disc stops during installation

  Hello

  I'm selling my laptop then removed all my files and wanted to restore the original configuration, I inserted the recovery of the product and to 68%, I hit my laptop and must have dislodged the disc because it failed then. I tried the product recovery process once again (3 times now) and it asks me to insert the startup disk (I don't have it).

  Can anyone offer me some tips that I have a new laptop and I am eager to try to sell my old as soon as possible.

  Thank you very much

  Ann

  Hi anndenton,

  Maybe your recovery disk is scratched and so it can't be read properly. What do you think?

  Can you please test drive Microsoft?
  If everything works with this, your material seems to be ok!

• Satellite advertising L870 3 recovery discs - do not have

  Hi all

  Apparently, someone can tell me how to get the recovery disks when I bought my laptop it says make recovery discs I did but he only made 2 and now requires a third drive...

  It came with win 8 installed and do not know if it is because of the accident

  Satellite L870-18 t

  Thanks in advance

  Rod.

  Looks like something went wrong during the creation of the recovery disc.
  Don't know why, but if you want to get a recovery disk, you can do so here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A300 - displays error recovery disc creator

  Hello

  I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

  I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
  [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

  Hello

  It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

  In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

  In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

  Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• Re: Satellite A300 - error creating recovery disc

  I'm not really providing any solution, but is facing a similar problem with my laptop Satellite A300-1EI, bought in Dubai, UNITED Arab Emirates. I tried to make records of recovery through Toshiba Recovery Disc Creator. However, each time, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on the net surfing, I discovered that the engraver of DVD from Toshiba is a little sensitive and try to use Verbatim DVD - R brand. I tried with Verbatim 2 days and at the last moment when I was about to dance with joy that the first DVD is created, received an error like below

  * "The following issue occurred during the recording of the data of the disc.*
  Current process will be stopped.*

  * A power calibration area error occurred.*
  * Please check if the disc is scratched or dirty.*
  * If Yes, please try again with a new disc.*

  "* (Error code: 0E01B5-26-00037304)."

  I don't really understand the message. Can advise you on how to create the recovery disks.

  Kind regards
  Vijay

  Hello

  To me, it seems that the used DVD discs are not completely supported by ODD.
  It seems to be a compatibility issue.

  I had this problem in the past, but I could resolve it using another DVD from another manufacturer.
  I had a good experience with TDK DVD-R.
  Using the R disk I was able to burn the disc, but using the + R I received an error message.

  See you soon

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

  Hello

  I am trying to create the recovery disc for my new Sat P200 and it gets 1/3 of the way (1/2 way through the first disc) and displays an error message:

  "The question has occurred during the recording of the data on the disk. The current process will be stopped.

  An error occurred during the registration phase. Please check if the disc is scratched or dirty. If so, please try again with a new disc.

  (Error code: 0E01B5-26-2A030C00) »

  I tried twice on nine discs Verbatim DVD + R.

  Any suggestions as to what causes this problem?

  See you soon
  sophiajs

  I recommend you test different DVD media.
  Try DVD-R and from different manufacturers.

  From my own experience, not all CD and DVD is cared for and compatible.

  Greetings

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• Satellite L500-12 q Recovery Disc Creator Error

  Hello

  I have a laptop Satellite L500-12 q. I used the Recovery Disc Creator to make recovery disks. It needs 4 discs. The 1st was writtenk ok, but on the second, towards the end of the current status, it stopped advancing. It's almost an hour, and it is still not finished. I'm on the second try. The disc is spinning and the drive makes noise as if it was written, but it does not advance at all.

  Please, could you help me?

  Thank you
  Claudiu

  Claudiu Hey,.

  What kind of DVD that you use to create the Toshiba recovery disks? I got also some problems to create a recovery disc but I changed DVD + R, DVD-r media and everything was ok! I used Verbatim discs to create because I have really good experience with this kind of discs. In addition, it seems that TDK discs also work quite well. Check this box!

  If it doesn't work check the Toshiba page for an update of the firmware of your WEIRD!

• Satellite U400-10J - Toshiba Recovery Disc Creator fails!

  I just bought a Satellite U400, and when I try to create the recovery with Toshiba Recovery Disc Creator program disc, I get an error message: "cannot find the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer.

  I haven't changed anything on the HARD drive! How can I create my recovery disk?

  I did a lot of experiences with Vista preinstalled fees and this message is the folder with the recovery image is missing. Is the folder and the data is gone.

  Are you sure you didn't do anything? Has anyone further access to your laptop?

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Satellite L500 did not Recovery Disc 2

  Hello

  I have just formatted my laptop using Recovery Disc 1. On the forums, it says after the disc 1, the menu won't ask you 2 Disc. But he never asked for disc 2. Should I have inserted just after that he asked me to eject the disc 1?
  I am writing now about my newly set up Win 7. Everything seems fine, but I wonder if the lack of CD 2 will cause no problem. Is it possible to start my laptop also using the second disc?

  Thank you!

  Post edited by: Muriel

  > I am writing now about my newly set up Win 7. Everything seems fine, but I wonder if the lack of CD 2 will cause no problem. Is it possible to start my laptop also using the second disc?

  The second disc will be created only if the first disk space is not enough! If the amount of recovery disk depends on the size of the image file.
  If your laptop works, I won't be afraid on the 2nd disk missing :)

• Satellite A200-AH6 - necessary recovery discs

  Please contact me as soon as possible. you are looking for the two recovery disc as soon as possible

  I found this page of Toshiba Europe:
  https://backupmedia.Toshiba.EU/landing.aspx

  Here you can order the for European laptops computers Toshiba Recovery disk