Satellite P200-136 works

Similar Questions

• Satellite P200 - 123 No Post, but still the boots

  Hello

  Have a strange, my old Satellite P200-123 worked extremely hot (70 inactive more than 100 of the load) 2 years so he disassembled and replaced the thermal grease, fans and cleaned. Standard maintenance went well, (apart from the microphone plug disintegrate at the start, but I use headphones so not really a problem).

  First boot after the interview I noticed that the screen does not display anything until windows log in screen, no toshiba screen, no post messages, etc. At first, I thought it may have lack of an external port (VGA or HDMI) however I tried to connect to an external device and he still refuses to show anything until the windows log on screen.

  I stripped and repaired hundreds of laptops (it's my job) but never encountered this in 15 years of maintenance and repairs PC and laptop. System running Windows 7 (not like it should make a difference) and the used thermal grease was the new Artic MX-3 and served on the GPU, the CPU and the Northbridge (and before someone says you must use the compound of unfounded pressure of toshiba ceramics, stuff I've used here are better for this the toshiba recommended stuff, believe me). The system works well (now idling at 39 and 65 at full load), I guess that's not much of a problem, unless I need to reinstall or restore my machine for some reason, all the world has an idea on how to fix this?

  Very interesting, Jaster! :)

  Thanks for sharing this information with us!

• Satellite P200 - 10G screen turns white cause driver

  I was gifted a Satellite P200 - 10G, works great so far, only if I try to install the graphics driver (Intel 945 G), both that of intel and Toshiba one my screen goes black on each Windows (XP, Vista, Win 7, Win 10). It works with the standard Win drivers (except Win7).
  Any ideas why this is happening. And maybe a workaround?

  Regardings

  mindscraper

  If I understand the question, the laptop works properly using the standard Windows graphics driver that is part of the system and standard resolution (I guess that 800 x 600 or 1024 x 768 or something like that).

  But after the installation of the driver graphics card, black laptop display changes and nothing is visible on the internal display. Right?

  This happens also in the external screen/monitor?
  Check it out

  But to be honest, the question looks like a malfunction of the graphics card.

• Satellite P200-1 b 6: Sound Driver update fails, and HD-DVD player does not work

  I just bought a laptop Satellite P200-1 b 6 and spent the day installing the updates recommended by the TEMPO programme. One of them was an update of RealTek audio driver but on run this it fails at about 80% of the way through with an error: "install Realtek HD Audio Driver failure!

  Now, the reader of HD DVD, Toshiba will fail with an error "unable to output the video to an external device.

  Please change your display keys of the device by pressing the Fn + F5 after the end of the application "." I tried this but it seems to have no effect.

  I'm now regretting starting to update the drivers installed. Should I try to rebuild the machine using the recovery discs or is there another solution that someone found? Or if others have found the upgrade work?

  All advice welcome

  Hello

  When I started using PC, one of my friends told me something: do not touch the well-executed system. I know that you, like so many other people out there, have updated things but as you can see, it can go in the wrong direction.

  This TEMPO software is good, but if all goes well the leave it as it is. What you can try is to use the System Restore tool and move the BONES to earlier time and hope everything will be OK again.

  Please post the result.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Satellite P200 P3PB3E: Network adapter not working after installing XP

  I have a Satellite P200-p3pb3e running xp - sp2 inder. I downloaded the drivers on the Toshiba site and everything is working fine except for one element: the Ethernet controller is marked yellow in the Device Manager.
  I don't know where I can get the driver.

  A strange point that may or may not have an impact: Atheros network card is displayed as AR5006X with EVEREST, while Device Manager displays AR5007EG.

  I used the driver from the Web from Toshiba site.

  Hello

  Satellite p200-1dy seems to be equipped with chip Realtek 10/100 Base-TX Ethernet.
  Therefore, it would be desirable to search for on the site Web of Realtek Lan XP compatible driver.

  :) See you soon

• Keypad does not work under Windows XP Home on my Satellite P200

  I installed Windows XP SP2 on a pre-installed Vista Satellite P200. All the features work very well except the pad that works on Vista but not Windows XP Home edition.
  Is there a specific driver, that I should install?

  The important thing is that everything is working fine now. ;)

• Accessibility does not work anymore on my Satellite P200-1I4

  I have a Toshiba Satellite P200 1I4 with Windows Vista on it and so far, everything has been ok, but a few days back I noticed that the accessibility of Toshiba is also known as the FN key does not work even the dark bars that appears on the family Albums disappeared.
  What is the problem you can me and how to fix?

  http://img126.imageshack.us/img126/7421/16645571rx2.jpg

  Thank you!

  I think the package has added Toshiba takes care of FlashCards.

  Then uninstall PVAT in Control Panel-> programs and features and download and install the latest version from the Toshiba site.

• Shortcut keys do not work on my Satellite L550D - 136 (PSLXSE)

  Hello

  I have a Toshiba Satellite L550D - 136 PSLXSE

  I wanted to work with the keys Fn + f (f1 etc.) numbers

  But they do not work. I've already updated my Windown and I already updated the package of service evaluated.

  What can I do, they work?

  By the way: the keys have no mechanical defects.

  Thank you

  Hello guys

  I put t really know what you are doing with your laptops. Each new laptop comes with the pre-installed operating system clean (recovery image) and FN (Flash cards) keys SHOULD work correctly.
  Later, when you install your own stuff or configure OS, something can go wrong, and cards flash may stop working. On this virtual path, it is not easy to say what may be the problem.

  Of course, you can try to fix this resettlement package added. This software contains cards Flash utility and it should work again. Before install VAP remove preinstalled version and restart your laptop.
  I put t know which type of installation of Windows you have installed, but anything is possible may be responsible for the non working flash cards.

  In the end, if you will not be able to fix it, to save all your data and install recovery disk HARD recovery plant using image - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Wth all factory settings will be OK again.

• Satellite P200 - 10G - some programs do not work

  Hello world.

  OK, so we have a record of product recovery and we have tried to reinstall Windows, but it wouldn't work. Some of our programs as the built-in webcam and Bluetooth don't work without reason. Other programs like Google Earth and AVG, antivirus, we cannot get out of our system. I installed the laptop with the recovery disk, but now when I put this drive and I try to reinstall Windows, nothing happens. There is no error message or anything. All the programs that I installed in my notebook, I can't delete. For example Google Earth, & AVG antivirus program. I get a message that says that these programs are already deleted, but they are always in my book. My 80 GB of disk c is almost full and I have no idea what occupies this space. All my music and photos etc are on my E drive.

  Does anyone know what we should do?

  Much appreciation,
  Musa

  According to the specifications of the laptop Satellite Satellite P200 - 10G has no module BT and BT will not work.
  In the disc specification HARD is described as 120GB (5400 RPM) SATA. The question is: do you still have original HARD drive inside or you have upgraded with a new one?

• Satellite P200 - 16 X - cooling system does not work

  Hello

  Since a few days, I have a problem with my P200 - 16 X. The cooling system no longer works and so tmy laptop overheating... until stop you it immediately. So I have to wait a while before being able to use it (the fridge is really good to cool, but only when the need to use is extrem). If I use it with the lowest consumption settings, I is overheating but the CPU is always at 65 ° C all the time.

  I know the standard answer to this kind of problem is dust, but this isn't the case here. I have always paid attention to this and I checked: there is no more than dust on the fans or the grid. I went into the BIOS but found no option to control the fans.

  Do anyone have any idea on this? What I find strange is that I found someone on a forum having the same problem as me and at the same time (a few days ago). Would it be an update for Vista, which can be the cause of this (here's the update only I made since December and at that time, everything worked well as I was playing games in 3D without any problem)?

  Thank you.
  Enguerran

  I can see satellite P200 - 16 X is listed on this page than the compatible laptop model, but are you sure you want to do it alone? To do this you need to disassemble the laptop everything and this must be done carefully following the right steps.

  The disassembly is described in maintenance manuals, but this document isn't public. Is guaranteed for your valid laptop?

• Satellite P200 - SD card reader not working not not running Win 8

  I upgraded my satellite P200 with windows 8, and the SD card reader does not work.

  Anyone know of a fix.

  It is always problematic for everything works fine when the old notebook use not supported and the more recent operating system.

  P200 works perfectly with Win7, so what you can try is to use Win7 driver. I put t know if you have tested already. In any case, if the laptop works well in general I think you can live without SD card reader.

• Built in microphone does not work on the Satellite P200 - 17 c

  Help, please.

  I have a Satellite P200 - 17 c. Windows Vista Edition home premium, 32-bit operating system.
  Sometimes, the built-in mic works then ceases to make Skype, useless msn. The webcam works fine but with no microphone. I've updated the driver, uninstalled and reinstalled several times that I care to remember.

  Sometimes it's the microphone works for a short period, then it goes silent. In the sound control panel bit is shows as working properly, but it's not.
  Please help me.

  Is preinstalled OS original OS that you got with your laptop.

  It is still problematic to discuss problems that sometimes occur. Have you checked the mic Skype or MSN options when this happens?

  Check in the sound options > recording devices is mic is enabled and set as default device. So try something and you should see the reaction on the green light. Is there a reaction?

• Satellite P200 - Microphone has stopped working after installing Windows 7

  My Satellite P200 came with Vista Ultimate, the mic has worked for a few months, all of a sudden it stopped. I decided to install Windows 7, but the microphone still does not work.
  Any ideas anyone?

  I use this laptop for skpe my people a lot. I can use an external mic very well, but really want my only integrated works again.

  Hey Buddy,

  Sounds like there of something wrong with your installation of Windows 7 so the microphone doesn t work anymore...

  I recommend updating the driver of the webcam, because the microphone is a part of it. You can find updates driver here:
  http://EU.computers.Toshiba-Europe.com

  I put t know what Satellite P200 you have exactly, but if you can t find a driver Windows 7 for webcam, choose another model which is fully Windows 7 taken in charge, e.g. by Satellite P300.

• Webcam does not work on Satellite P200-14N

  Just got me a new Satellite P200-14N, and one of the first things I tried was to use the webcam.
  All other things worked, but I could not the operation of the webcam.
  Couldn't find any refernce whatsoever of it on my pc.

  The cam is located in the upper part of my screen but the sw is not found. (at least I can't find it).
  Anyone who can help me out on this?
  Thank you very much.

  Kind regards
  Cees van der Leeuw

  Hello

  On my friends P200 web cam works fantastic. The use is very simple. As far as I know the software web cam starts up automatically when the OS starts and you can see small icons in the taskbar near the clock.

  Launch webcam software you must move the mouse on the left side of the screen because it is placed hidden toolbar. By default, the toolbar is hidden. Check it please.