Satellite P200 - 1fc - how to fix the connector cc

Similar Questions

• Satellite P200-1EE - how to replace the keyboard

  Ive just bought a replacement for my P200-1EE keyboard, I have an idea but how to replace, anyone know?

  Hello

  The keyboard is fixed with four screws that are hidden under the cover of the thin plastic strip above the buttons of the F1 to F12 keys keyboard.
  You may need to remove this plastic cover to gain access to the screws.
  But you must be careful because it could break.

  The keyboard is connected to the motherboard with a flat cable.
  First disconnect in order to remove the keyboard.

  But note; If your warranty is valid you should not try this because it might void the warranty.

• Re: Satellite P200-178 - how to replace the HARD drive?

  Is it really possible to replace the HARD drive on this model? I have another satellite & which was 2 screws & pulling on one leg, job done.

  The P200 has an opening apparently get actually on the HARD drive but it gets you on the underside of the car, so I think that you will have to pass the upper part by means of the keyboard.

  Can anyone help? I lost 70 pounds on a HARD disk that cannot be mounted?

  Thanks in advance

  Hello

  As far as I know on all models, it of possible to swap the HARD drive.

  According to the user manual on the underside of the laptop it is a case of HDD for HDD1 and HDD2. This coverage is provided by one or two screws, I think that should be deleted. After that, you are able to exchange the HARD drive.

  Take a look on the underside. HARD drive swap is not complicated and can be done in a few minutes. :)

• Satellite P200-1FZ: how to insert the smart media card into the card slot

  Hello

  I have read the slim manual, and I can't find any info on the card slot. (other than where he lives on the laptop)

  Could someone tell me please how to insert my card SmartMedia? the slot is huge and I'm worried about losing the card inside the laptop! I assume that the smart media will be automatically run?...

  Thanks in advance!

  It would be good to know what model of laptop you have.
  But, normally, for the smaller cards, you will need an adapter that is often included, as for the memory stick pro duo.
  I think it's just normal size and you have to put in the middle of the card reader slot until you hear a click.

  If you have not changed the AutoPlay settings, you must get a new window with the files on your card, when you put it on your laptop.

• Satellite P200 PSPBGU: how to use the bluetooth?

  Hello
  When I run Bluetooth Configuration (start, toshiba folder menu), it says "device Bluetooth to connect, and then click ok. But how do I connect it?
  I also tried to use Nokia PC Suite, it can not connect to my phone via bluetooth.

  Hello

  Please see the bottom of your laptop. Every laptop comes with a BT sticker BT module there.

• Satellite P200-144: how to disable the TurboCache graphics card

  Hello

  Is there anyway to turn off Turbocache because it is share 527MB of RAM. 256MB will do me well

  Thank you

  Hello

  I put t think that it of possible to disable the nVidia TurboCache graphics card.

  In any case, check the settings in the nVidia control panel.
  Try to set the Advanced view for even more options!

  But this option is only a slight hope I do not know if you find something on Turbo Cache m.

• Re: A few questions about the Satellite P200 - 1FC

  Hi people,

  died on my trusty laptop and I need a new. The P200 - 1FC seems to do the trick, and I have a few questions that I hope this is the right place for.
  Is there a hardware switch (or key combination) to disable the touchpad? Y at - it an indicator of the State of the touchpad?
  Is there a hardware switch to inactivate the wireless network components?
  Is it possible to add physical memory to the dedicated graphics card?

  I know you can Filch system memory to increase the available for graphics operations, but is it more logical to add system memory or add graphics memory.

  What is the equipment for the memory locations system config factory base with 2 GB of RAM? There are 4 slots or 2? Are they all filled?

  How is it difficult to "downgrade" to XP machine? Will there be XP drivers available for all components?

  Thanks in advance for any help.

  Hello

  I m P200 not owner, but I'll try to answer your questions.

  > Is there a hardware switch (or key combination) to disable the touchpad?
  Yes, the FN + F9 key combination should enable and disable the touchpad!

  > Is it an indicator of the State of the touchpad?
  Well, in the taskbar you should get a notification icon if the touchpad has been disabled

  > Is there a hardware switch to inactivate the wireless network components?
  Yes, the WLan switch is available on laptop computers (probably on the front).

  > Is it possible to add physical memory to the dedicated graphics card?
  No, the graphics card supports an its own local cache. Graphics cards support also hyper memory. This memory hyper depends on the amount of main memory. Total video memory is the sum of the local cache and Hyper memory.
  But once again; physical memory cannot be added.

  > What is the load out for the locations of system memory in config factory base with 2 GB of RAM? There are 4 slots or 2? Are they all filled?
  There are 2 slots of memory and the laptop has been delivered with 2x1024Mo modules.
  The laptop supports 4 GB max memory, but as much as I know Windows 32 bit does recognize only 3.02 GB due to the limitation of the 32 bit OS!

  > How is it hard to "downgrade" to XP machine? Will there be XP drivers available for all components?
  It of not difficult to downgrade the laptop to the XP operating system.
  On the Toshiba site
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
  You should find all the drivers for the P200 PSPB6 XP

• Drivers Windows xp on Satellite P200 - 1fc

  Hi all

  Don't want to look stupid. A couple of days ago, I installed xp on my laptop and I downloaded the drivers I needed, the noise, the wlan and so on. But what I really need to know how to install them? I know it sounds really thick but I open the files and double-click the installer and it says install, but after that's over nothing at all! I installed wlan and hotkeys, but able to get its installed.
  Please can someone help me?

  I have a Satellite P200 - 1fc

  Thank you

  Hello

  Hmm. Your post is funny ;) but don't be angry with me about this comment ;)

  The installation is really easy. If there is a setup.exe you need to start this file. Then, the installation should begin.
  If the setup.exe is not present then you must install the drivers from the Device Manager. Here, you have to choose the device and point to the downloaded driver package.

  Installing the audio driver is a little more complicated. First of all, you need to install the XP patches and fixes Microsoft KB888111 and KB83522. And then, you must install the audio driver.

  Ciao mate

• Satellite P200 - 1FC - key product Vista not legible, do I need?

  I have a Toshiba Satellite P200 - 1FC and his original running Windows Vista Home premium edition (originally installed when I bought it). I have the original CD that came in the box.

  I want to reformat the hard drive and reinstall Windows Vista but the sticker under my laptop is more readable. Do I need if I reinstall windows vista with the supplied with the laptop recovery disks? If I need them in the installation process, how can I recover my instalation key because sticker is removed clean and not readable? He's somewhere in a file on my computer or I have to get microsoft to get it back for me?

  Please help me I don't want to take a chance to ruin the perfect system just because of the instalation key. Thank you

  Hello

  If you need to install windows with recovery disk, you don't need key installation :) But if you want it back before installation, you can use a program like Keyfinder. It retrieves the key of Windows and Office series

• Satellite P200 - 1FC: CD/DVD player won't start - error Code 10

  My Satellite P200 - 1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD drive is listed in the device as "TSST corp CDDVDW TS - L632H ATA Device" Manager.

  Initially, the drive worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  By clicking on 'could not load driver software' product solutions but not solution.

  The search for similar issues in the forums of users suggests that use of a page of Microsoft Support Help & directed "the CD-ROM drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".

  However it is to change the registry! As a relative novice, I am reluctant to do unless I can find no easier way.

  Should I bite the bullet and and enter into this minefield, or is there a better way?

  > At first the car worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  Certainly, this error is caused by an incorrect registry entry.
  I had this error several times and I solved this disassembly of these registry keys upper and lower filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here are a few steps how it worked on my Windows system;
  -J' removed the Device Manager CD/DVD drive
  -Then edited the registry as described above
  -Restarting the laptop

  I'm sure that this will also help you.

  Good bye

• A few questions about Satellite P200 - 1FC

  Hello

  I am planning to buy Satellite P200 - 1FC but I want to know:
  -What is the hard drive speed (RPM), is 4200 or 5400?
  -What is the capacity of the battery 6 cells, 9 cells and how many mAH?
  Does anyone have this laptop battery and haw do under normal conditions of use?

  Thank you
  Ivan

  Hello

  I m not the owner of a Satellite P200 - 1FC but I found a very useful information on this notebook on the official page of Toshiba.
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?PRODUCT_ID=137284

  I have goggled autour also and have seen this info:

  > - What is hard drive speed (RPM), 4200 or 5400?
  250GB (4200 RPM) SATA 12.5 mm

  > What is the capacity of 6-cell, 9-cell battery and how many mAH?
  6 cells but the AMM is not known to me

  Maximum range: up to 02:20 pm
  But you should know that it is only an approximate value, because the battery working time depends on the use of the laptop.
  Using this laptop you can expect a time of 1.5 hours battery work

  Best regards

• Satellite P200 - 1FC - CD/DVD does not read discs

  I have a Satellite P200 - 1FC ' CD/DVGW TSSTcorp TS-L632D ATA Device will not read CDs or DVDs and do not respond. Device Manager shows that this device does not work correctly.

  Can you please help?

  Hello!

  Try to remove the drive from Device Manager CD/DVD, and then restart the laptop. It work?

  If this isn't the case, you should try to remove the upper and lower filters:
  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Re: Satellite P200 - 1FC - what DVD burners are compatible

  Toshiba Satellite P200 - 1FC - need advice as what to buy to replace the dvd burner that does not burn.
  So is going to replace.

  Thank you ricky

  Hello

  You need a compatible because different master/slave/c-salt settings.
  I m not very well what drives could be supported, but in my user manual which was preinstalled on my laptop (unfortunately not P200) I could find a list of compatible drives. Maybe your manual contains a similar list

  But if you won't find details of compatible media in you manual user then you may contact the service provider allowed in your country and could order these ODD.

  Welcome them

• Satellite P200 - 1FC: no sound after system update

  Yesterday my laptop did an update of the system for Windows and when I restarted the computer, my speakers did not work, my ATI graphics card was not found and that the reader has stopped working.

  I don't know what happened, but I don't think that the update installed correctly.
  I had a similar problem on my old laptop with XP and I due simpy reinstalling the update.

  For some reason I can't do this on my current.

  I use a SATELLITE P200 - 1FC.

  Is now SP1 for Vista installed?

  I ask this question because I got message on Vista updates and SP1 was who listed there. I'm afraid, it can have a negative influence on the good OS and I'm quite skeptical about it. For now, Toshiba does not support Vista with SP1.

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.