Satelite L50D-B Constant restarts after a stop

Similar Questions

• PSL40E xp restarts after a stop only on the power supply current

  Uncheck the automatically restart in the system failure section
  Disable wake up LAN
  Disable installation
  SP2 or sp3, same problem
  Install any drivers
  knowledge microsoft (Roxios Easy CD...) same problem, restart after a stop

  Bios Flash, SM bios for vista and win 7, but not for xp on page drivers toshiba...

  This occurs when the LAN cable is connected to your laptop only?

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

• Satellite P200 - restarts after a stop

  Hi guys

  I hope someone can help because it is driving me crazy. I have Vista 32 bit installed Premium. I have a Satellite P200 13Z laptop and when I properly close down the with Lalonde to start / stop the laptop goes through the procedure correct stop, but after about 10 seconds, it restarts.

  This only happens when the power cord is connected. When I unplug the power cable and shut down the portable computer remains off.

  Can someone shed some light on what once more makes me crackers.

  Hey Buddy,

  Have you plugged the external devices to your laptop, e. g. mouse, keyboard, USB HDD, or something else? If yes remove all these devices, they could cause these automatic starts.

  I recommend also check the BIOS. You should find an option called Wake up on LAN and it should be disabled.
  Also if you can find Wake up on keyboard disable this feature too.

• Windows 7 restarts after a stop

  Hi everyone, I have had this problem for as long as I can remember. When I would shut down Windows 7 it would end closing and then, to the point that it is supposed to stop, it restarts

  It happens all the time and I couldn't find a solution after trying many things I've seen on the Windows community forums with similar problems. I tried updating the bios, changing "PowerdownAfterShutdown' from 0 to 1 in the registry, and then 1-0, checked the event viewer and found no error message, reset the BIOS to factory settings by removing the battery for half an hour, and even after the upgrade to a brand new SSD and install Windows 7 from scratch the problem persists. This leads me to believe that it has something to do with the motherboard and BIOS; but like I said that I've already updated and even reset the BIOS and it still happens.

  System Specs:

  Intel Core 2 Quad 2.4 GHz (Q6600 B3)

  Card mother Gigabyte (GA-N650SLI-DS4)

  8 GB of RAM (4 x 2 GB DDR2)

  NVIDIA GeForce GTX graphics 760

  SSD 250 GB Samsung 840 Evo (operating system)

  Barracuda 2 TB HDD (mass storage)

  I am running Windows 7 Professional 64 bit

  Any help would be greatly appreciated!

  Hey Gordo,

  Please keep us updated on the status of the issue.

  It is possible that there is a hardware problem.

  I suggest you to contact the computer manufacturer for assistance.

  Thank you

• Restart after a Stop error blue screen

  I got a blue screen on my laptop Toshiba Satellite 5200 Series stop error.

  I could point out here, in its entirety, if that would be helpful. However, he begins by telling me to restart the machine, but the power button / stop device is not allowing me to turn it off.

  Should what steps I take?

  Crikey! In another forum someone told me to press the button for 5 seconds... and it worked!

• Satellite Pro L40 PSL4BE automatically restarts after a stop

  Hello

  I have a question where my laptop start automatically after apparently past Hibernate and shutdown by closing the lid. (I have it set so that it goes into hibernation when I close the lid.)
  The strange thing is that this only happens when it is connected to the power supply. If I close the lid when on battery, it goes into hibernation and remains closed as it should.

  It all started when I changed my power supply mode of "Balanced" to the 'Performance '. Put back to "Balanced" didn't help, and not affecting the setting the lowest. In addition, he used to come back from hibernation automatically once I opened the lid, this happens is no longer.

  I'm not sure if it is a hardware or software problem.

  This weekend I reinstalled the laptop using the recovery disks provided and applied all updates and patches for Vista, but the problem remains, so now I'm leaning more towards it being a hardware problem, even if I have no idea what kind of hardware malfunction could be the cause.

  Does anyone have an idea what might cause this behavior?

  All of these parameters are well known to me because I use the Satellite P200 with Vista. I have tested almost everything about the parameters energy saver and everything works fine. Saving energy for L40 and P200 is the same and there is no difference. Because of this I really can't imagine that there is a hardware problem.

  I hope that you understand very well that you can set this for all profiles of three in two possible situations (on battery and plugged in). What should happen when the lid is closed belongs to Vista power settings. Try it please change all of these settings in the advanced power settings.

  To be honest, I think you make a mistake.

• Touchpad does not work and Equium automatically restarts after a stop

  Something going wrong drasticaly yesterday. I wasn't doing anything elaborate, just work excel and I'm tired of the Tablet touch and 'connected' one infrared I smile sometimes use... it did not work too well, low battery level, I guess, so I returned to the touch pad... but the touchpad was now for some reason, doesn't work do not at all and did not since...

  Turning off the laptop and was my solution, but he has not corrected the situation... the infra-red mouse works very well but with new batteries... on top of that, now when I turn the laptop off, it stops but then automatically starts once again, when a microsoft message appears saying that the computer has recovered from a serious error.

  So since this episode, the touch pad does not work and the computer will stay off! And maybe it's me crazy, but some of the keys on the keyboard are more sensitive as they once were.

  It was a satellite, and bought only in early January.

  If anyone can help I would appreciate it a lot.

  Thank you

  Hello

  Sound very mysteriously. However, as in the first answer mentioned the function FN + F9 turn off and turn on the touchpad.
  I also recommend to check the Device Manager if all devices are working properly.
  If you find any errors, but the problem persists then the step of text should be the reinstallation of the operating system. In this case, please use the recovery CD.

  If the recovery procedure will not solve the problem, I guess there must be something wrong with the hardware and the ASP help is needed. Guys could start diagnostic tests and can locate the fault.

• Windows vista restart after I stop I have to unplg the power to stop

  whenever I closed my system reboot

  Hi antoniocasillas,
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
  
  Your computer restarts automatically if your he encounters an error that requires him to plant.
   
  Try to activate the option "disable automatic restart on system failure" to check if you receive the error message for the same.
   

  This option prevents Windows from automatically restarting if an error of Windows to fail.

  In the screen "Advanced Boot Options" choose this option.

  Check out this link to do the same thing:

  Start your computer in safe mode

  Advanced, including safe mode startup options

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 9320 constant restart blackBerry smartphones after trying to activate the Bluetooth

  My BB Curve 9320 is constant restarting.

  I got the phone about 9 months.  I went to activate Bluetooth for the first time today.  As soon as I opened the menu bar and "verified" bluetooth, the phone turns off.  It began to restart... He went through the entire cycle of loading and reach the screen normal, but after 3 seconds stops and restarts again.  Permanently.

  I have:

  -taking the battery (several times): continues

  -a followed the advice to start in safe mode, it will start in safe mode, but stops after 3 seconds and restarts

  -connected to the laptop via USB, but the computer will not come to get the camera to access

  I actually got on the screen and in the second 3 window was able to click on the set of networks to see that Bluetooth is more "verified"-any, yet what have the 3 seconds before the reboot cycle.

  Advice?  Suggestions?

  Hello and welcome to the community!

  In view of the failure of the Safe Mode, you probably need to use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• STOP 0X7E and rolling restart after Windows update

  Hello

  My apologies if this has been covered before.  I did a search and have not seen this covered.

  I'm working on HP zv6000 laptop computer a parent with Windows XP Home Edition.  I do not have the recovery disks that may have come with it, and there is no recovery/repair hard disk partition.  Sometime in early January, after a reboot due to the installation of the updates of Windows, he went in a rolling start scenario.  After several attempts, I got to the screen automatic reboot temporarily disabled and advanced boot options.  The error it gives is:

  STOP 0x0000007E (0xC0000005, 0x89891E7A, 0xF78DA7B0, 0xF78DA4C) parameters with.  No module name is given after the error message.

  The laptop does not start in safe mode.  It restarts after loading mup.sys.  I don't know which module occurs after that in the boot sequence, which told me a lot.

  I suspect a driver issue, but do not know how to proceed from here.  I can get into the recovery console via a XP Pro CD and can start with a BartPE disk.

  Can I turn off the drivers of one of these means?  If so, how do you identify which those who have been installed around January 9?   Once identified, is debilitating as simple as move or rename the driver file?

  Thanks for your suggestions!

  All,

  The problem has been resolved by doing a repair of the Home CD from the manufacturer of the Windows XP installation.  It restored the laptop to XP SP2 status.  I installed the SP3 and later updates, but refused to install 3 updates of pilot.  Everything seems to work OK.

• After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop ""»

  This is windows vista business.

  After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop. ""» I tried to find out latest fashion good and safe, but still the same. Help, please.
  Is it possible from a different drive to boot and then by applying some changes that would stop it. At the time when the computer is unusable, it just starts to "configuration updated 3/3" then restarts.

  Hello

  Try these methods.

  Method 1:

  You have to do a cold start, press and hold power for a few seconds (10).

  Wait a minute or two and turn it back on.

  Make sure that "all the" non-essential devices are disconnected. (USB keys (for example, flash drives) or any other external media like this takes place.).

  If you can, start safe mode.

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  NOTE: see 3 from the link above, Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Select Mode safe mode with networking.

  Method 2:

  Use the system restore feature:

  (a) click Start, type system restore in the Search box or search programs and filesand then click on the system restore under the programs section.

  (b) on the System Restore page, click Next.

  (c) select a restore point during which you know the operating system works, and then click Next.

  The restore point should be a date that precedes the first time you encountered the problem.

  NOTE: If you use system restore when the computer is in safe mode, you can't undo the restore operation.

  See also: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

  http://support.Microsoft.com/kb/949358

  Data loss caveat:

  Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.

  Method 3:

  Step 1:

  To avoid this problem on Windows Vista, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on Windows Update site. Install the update that applies to your version of Windows Vista so that you are able to install future updates.

  A software update is available for the Windows Vista installation software feature

  http://support.Microsoft.com/kb/937287/en-us

  The following files are available for download from the Microsoft Download Center:

  Windows Vista x 86 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=15287

  Windows Vista x 64 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=23732

  Step 2:

  Save the update to a location on your hard drive, you can find and then install the update from there.

  Download, *Save* and install the update with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non-essential processes in the Task Manager.

  Disable antivirus programs and firewalls.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.

  When the file is downloaded, see these steps.

  (a) right -click on the file and

  (b) select run as administrator from the menu.

  Check if it helps.

• VM NIC disconnects after a stop and restart

  ESXi 5.5.0, 1331820; vCenter 5.5 device 1476327. I noticed a problem with VM NIC disconnection after the stop of vcenter. Last week, I shut down a machine to clone virtual w2012r2 and restarted. No network. Look in vcenter and of course it is disconnected. Looks like that has happened since I went to 5.5 (new installation). The virtual machine shows no change event to account for something happening to the network card. VMXNET3 adapter.

  Any ideas?

  VMware.log shows this interesting tidbit.  ethernet0.startConnected = FALSE

  This led me to the other setting that I had not checked: connect to power on. Oopsy daisy. Me solved problem own stupidity.