Satellite C50D - no drive bootable after upgrade Win10
Hi I need help I have upgraded to windows 10 on my c50d satellite an 11 q, but don't know what bad now I get media failed and then no bootable disk please don't restart I have no recovery disk and am at a complete loss as what to do... Thanks for reading the trace
Are you sure you are trying to boot from the internal HARD drive?
Recommend to check by pressing the F12 key while turning on the unit...
The start menu should appear where you could choose the HARD drive as a boot device...
In case you are not able to boot from the HARD disk (perhaps because the upgrade system went wrong), then you will need to reinstall the system using the recovery media...
You said that you did not create this disc... Well, that was a big mistake, but anyway; You can order this support here:
http://backupmedia.Toshiba.EU/
Tags: Toshiba
Similar Questions
-
Satellite L650D HDMI audio driver problem after upgrade WIN10
After the upgrade to Windows 10 audio HDMI stopped working.
Tried reinstalling the Conexant Audio driver
Any ideas how this problem could be solved?Recently, I saw something on the CATALYST of the interface driver. There is an option "INSTALL HDMI AUDIO Driver. I was surprised to see this option under Graphic-catalyst-Driver. But it is logical, the HDMI is a video like Audio (AV) connection.
So please try to install the latest driver of your interface.
Maybe it will work for you. -
Satellite L100 113 starts slowly after upgrade memory
Hello
Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
This behavior is noticed only after "shut down."
It does not happen with "restart".
What can I do to eliminate this long "attempts" to start my laptop computer?Thank you
Novomir KovalenkoHello
This problem appears before upgrade memory?
Have you used exactly the same memory modules?
If this isn't the case, then perhaps there are a few compatibility issues.Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.
-
Sattelite L50 - B - 1 P 1 after upgrade win10
Hello I have a P L50-B-1 1 computer laptop and I have a few problems after upgrading windows 10
1 video R7 driver missing so no present catalyst so I weak and box spring and frezess in games
2 voice garbeld microphone when recordingI know that the series is interrupted, but there should be some sort of fix for the problems I have atm experience.
I don't want to go down to wind 8.1/7
What are your exact specifications, processor, RAM and OS type 32-bit/64-bit
According to what it is, you may be able to use the new Crimson AMD drivers instead. I have a L50D-C - 13 G and I abandoned the catalyst for Crimson drivers drivers and my machine is running great. I have a R6 of Carrizo A10 - 8700P with windows 8.1 and it works very well for me. The driver lists the compatible hardware, read it and see if your machine is supported.
-
Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows
Hello
After upgrade to Windows 8.1 of the Windows store, I discovered that my Bluetooth printer
has disappeared. Looking at the wireless settings, no more option to turn on/off Bluetooth.
How can I return my Bluetooth?If you updated the system of Windows 8 Windows 8.1 you must update the drivers too!
You will find on the page of the Toshiba UE Windows Update 8.1 driver drivers
There is also a statement of installation containing the installation order.1 Intel Wireless display uninstall
2 uninstall Intel Proset
3 Realtek Audio Driver uninstall
Day 4 windows 8.1
5 TOSHIBA Assist Desktop Upgrade
6 Intel Display Driver upgrade
AMD 7 Display Driver upgrade
8 Intel Rapid Storage Technology driver upgrade
Update driver Audio Realtek 9
Update 10 ALPS Pointing Device Driver
Upgrade of 11 Synaptics Touch Pad Driver
12 Atheros Wireless LAN Driver upgrade
13 Intel PROSet/Wireless WiMAX software update
14 Ericsson 3 G driver upgrade
TOSHIBA 15 system upgrade driver
Upgrade of 16 TOSHIBA Service Station
TOSHIBA 17 function key upgrade
18 TOSHIBA eco Utility v2 upgrade
19 TOSHIBA Fingerprint Utility upgrade
TFPU 20 WBF deleting fingerprints tool upgrade
21 TOSHIBA PC Health Monitor Upgrade
22 TOSHIBA VIDEO PLAYER Upgrade
23 CyberLink MediaShow 6 to upgrade TOSHIBA
24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
25 TOSHIBA resolution + plug-in for Windows Media Player upgrade
26 TOSHIBA HDD Protection upgrade -
Satellite P755: Hardware buttons after upgrading Win10
Hello
I did an upgrade of my P755-PSAY3E for Windows 10 today and has clean - install later. After that, I installed this Toshiba in relation to the Toshiba Windows 8 Upgrade Assistant tool. Win10 is now running well so far, but I have problems to get the hardware buttons between the keyboard and screen work (eco-utility, WiFi, Volume) backlight. The Fn keys work correctly.
Can someone tell me please which driver package (s) is responsible for these buttons? Wouldn't be value added package? VAP is installed, can't find anything that helps. Good idea to try Windows 7 drivers?
Thanks and best wishes,
AlexHi Alex...
I managed to have some buttons work on my P855, installation of Flash Cards support utility for win 8.1 (64):
There are several versions (win 7, win 8.1, etc.).
Some buttons are mixed upward, but still better than nothing.
-
S50 satellite - B - problem after upgrade Win10 touchpad
I have a brand new S50-B-15F that I unboxed for the first time today. I have updated to OS to win 10, but the trackpad stops working after the initial upward boot (even if a USB mouse works fine). I've seen similar comments on this forum for another model of S50 (and referring I think to the pilot of the momentum) but not sure if this applies to my model. Could someone advise on the steps to solve this problem, keep it as simple as possible!
good news... Thanks for the short comments...
-
Satellite Pro A10: No sound after upgrade to Windows XP Home SP2
Hello
Just use the recovery disks on my Satellite Pro A10, no problem with the sound, and then upgraded to XP Home with SP2, no noise.
What I've read elsewhere, this is a problem and there seems to be an answer. I spent hours looking for drivers updated without success.
I have also contacted Toshiba support, after blow and blow that they reported the following driver, 5.12.01.3542, which is the same one that I have already installed and does not work.
Certainly there must be something out there that works.
Ant.
Install the driver of his most recent available FRO this sound chip and perform all the Windows updates available on the Microsoft page!
Update just the BONES together!
http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-usNotes; You may have to restart the laptop and need to connect to this site several times to get all available patches.
-
Hard drive crashed after upgrade to Windows 10 Windows 7
* Original title: HARD drive Crash / Win7 for 10 Upgrade... bad timing!
I have a PC running OEM Win7 x 64... just did the free update to Win10 a few days ago. HARD drive just crashed hard. I did an ISO when I upgraded to Win10. I'm trying now reinstall on another HARD drive... and no matter if I use Win7 OEM drive or ISO Win10 disc, it tells me that the activation code is invalid. I was under the impression that, as long as the mobo (and everything else except the HARD disk) is the same, Windows will allow you to reinstall with the key?
Any help is greatly appreciated!
Scott
After the upgrade to Windows 10, you cannot use your Windows 7 or Windows 8/8.1 product key.
Click on this Later.
Continue to use the chat support instructions
-
Satellite L855 - 12N - keyboard problem after upgrade to Windows 10
Greetings friends,
the problem goes like this: I have a TOSHIBA satellite, L855-12N, Series notebook.After updrading to win 10, some of my keys (a, n, enter) did not work initially.
If I wait for awhile, they start work later.
I find that I continue to press a button, (for example the button "a") for a long time, I see that he started to answer, then stop again and then answer - stop, until finally it works OK.
I tried to update the drivers, uninstall and then reinstall, but it doesn't seem to work.
Anyone know what's going on, or have any suggestions?
Thank you.You are 100% it's a matter of Windows 10?
Looks more like a hardware problem, keyboard should replace.Go into the BIOS and test the keyboard in there.
If it goes into the BIOS and then replace the keyboard.If it's a software problem, try uninstalling the driver for the touchpad Control Panel, then reinstall it via Windows Update.
-
Satellite L40t-b917 - sleep problem after upgrade to Windows 10
Name: satellite product L40t-b917
Operating system: Windows 10 (64-bit)
Hello
If I have problems with the mode 'sleep' after that I upgraded to Windows 10. When I try to resume my laptop from sleep mode, Toshiba screen seems then the unit turns off.
After 2 hours of searching on the internet I found that a solution said that my drivers are too old. So I tried to download but my drivers resembles not yet supported.
Any solution to this problem?
Where can I download updates for my device?
Thank you.
Hello
Go to control panel and uninstall the Touchpad, display, wireless and sound drivers/utilities.
Restart, and then run Windows Update to install the updated Windows 10 compatible drivers.
Make sure that the BIOS is also the latest version.
-
ScanDisk USB Flash Drive problem after upgrade to El Capitan
After the upgrade to El Capitan, I can't access the vault secure on my USB Cruzer facet flash drive. I have Plug and display files as usual but when I try to open the safe, I get the message ' Scan Disk Secure Access V 2.0 requires San Disk USB Flash Drive. Please insert one. »
The Flash Player has worked fine before the upgrade to El Capitan and I can still use the files outside of the secure vault but, basically, I cannot now access the secure vault. I'd appreciate any thoughts on how this can be resolved. I only am not an expert so please, keep it pretty simple.
Sounds like a problem of compatibility with the Secure Access software and the OS X El Capitan of SanDisk. Try download and install the latest version of Secure Access of SanDisk.
It seems also be other users having the same problem, you may get better assistance with this through SanDisk. Someone else said that upgrading to the latest version of Secure Access has solved the problem.
http://forums.SanDisk.com/T5/SanDisk-SecureAccess-2-0/SecureAccess-2-0-and-El-CA Dube/td-p/347378
-
Satellite P200 - option SATA missing after upgrading the BIOS
Hey guys!
First sorry for my englich
So I have a toshiba satellite p200 1jy upgrade the version of the bios (Phoenix bios) 2.70, but when I update upward I don't have the option of ahci sata or ide mode, I do not have this option, but I had before upgrade,
so please what can I do to switch to ahci or ide mode, can I downgrade the bios versionSo thank you we
Hello
Must add driver SATA while installing Windows.
During the installation process you will be asked to add the driver (F6 key)
Then you could add the connected USB floppy disk driver.More details how to do here:
http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htmor here
[How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]
-
Pavilion g6-1245CE: drivers PCI and Realtek WiFi don't work after upgrading Win10
Hi people,
After updating the OS to Win7 x 64 to x 64 on a HP Pavilion G6 1245CE Win10, I have some difficulties with some hardware drivers. Most of the problems I could solve myself, but there are four material elements that continue to give errors, which I failed to solve by myself. These hardware problems also affect the ability to use internet (at least on WiFi) have this laptop, it is quite a big deal. I hope you can help me. I probably provide too much information below, but I think that at least the necessary information you need are there. I hope at least
So can you help me solve the errors established below, so that I can at least use internet via WiFi again on this laptop?
In Device Manager, I get the following errors and the info that seems worth sharing:
Network cards--> Realtek PCIe FE Family Controller
general tab:
Device type: network adapters
Manufacturer: Realtek
Location: Bus 2 PCI, device 0, function 0
State of the device: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
An object ID was not found in the file
Events tab:
Hello:
Unfortunately, you will not get the Realtek RTL8188CE 802.11b/g/n WiFi Adapter to work on the Windows or Windows 10 8.1, so I can't help you with that.
You can try the W10 drivers directly from the Realtek site for the ethernet controller and card reader.
Ethernet controller... Download, unzip and run the file setup.exe from the first driver on the Web page.
Card reader (PCI device)... Download, unzip and run the file setup.exe from the first driver on the Web page.
Because the wireless cannot work on W10, you may want to roll back to W7 in the 30 day period.
-
CD/dvd drive missing after upgrade to Windows 10
I have an Aspire 7551 G. Shortly after the upgrade to Windows 10 my cd/dvd drive has disappeared. If I put a cd in the drive nothing happens. The drive is not even appear on my computer more. If I open Device Manager it is listed under "Other devices" with a question mark. It appears as OPTIARC DVD RW AD - 7585H. How to bring back my cd player?
Maybe you are looking for
-
How can I add on cooleris?
Fire Fox? Thank you
-
3 14 yoga ghost touch touchscreen
Hello world I experience a lot of problems with the touch screen on my Yoga 3 14. At least once a day I get ghost keys, i.e. it starts thinking that the screen is pressed when it is not. He shut the windows, open the keyboard and types, etc. I notice
-
Hello I installed the 2012 server in vmware esxi the server is a satandalone and is not a member of the domain I have configured the server to be a ntp client and synchronize time from an ntp server closest to you. When I check the offset of the time
-
Coprocessor driver missing HPG6062ea
So, I have a HP G6062EA, which came with Windows Vista 64-bit. It was great to work (except that I need to replace the battery, so its plugged in at all times) until I added a new hard drive and install a fresh copy of Vista 64 bit on it. It now runs
-
What would be the reasons why I would need constantly to reset my router? Looks like I need to do more when I deactivate my ssid broadcast.