Satellite P850/P855 - sound/Image when using the media shift

Similar Questions

• dirty scan image when using the charger - m225 printer

  use of m225dw printer for 4 months now. scan of the magazine images have vertical lines all over the place in the document.  Please advise how to clean the part of the supply. I don't think I have the same problem when scanning using the glass. Please tell us how to clean the description step by step including feeder (?) for parts, etc.

  The fix is usually very simple...

  When you get the lines while using the ADF documents and not from the scanner glass, it is because there are a few pieces of paper/dust/something in the small drop of glass at the bottom of the glass.

  Lift the cover and you will see this tape from a window, just under the side where the paper feeds.  Where is the scanner parks actually 'see' the paper as it rolls.

  Carefully remove the pieces with a can of compressed air or a brush.  They line up right where the scratches are usually.

  I had this problem with my 8600 before HP and found the answer here on the Forum!

  WyreNut

• distortion sound when using the media player but not any other media suite e.g., be able to go

  I have a new samsung 305th and sound playback for the media player is distorted on the helmet and built in speaker, but all the others like suite of media and power go her crystal clear. makes all kinds of settings and checked sound card, what is the problem? Fix, it has found a problem but says to contact the manufacturer.

  Hello

  1. what fixit did you run?
  2 were there any hardware or software changes made on the computer before this problem?

  Carry out the methods to solve the problem.

  Method 1
  Run the troubleshooting windows media player setting and check if the problem persists. Follow the steps described in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Method 2

  Try disabling audio enhancements and check if that helps.

  (a) open her by clicking the Start button, then Control Panel. In the search box, type sound, and then click sound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  If you do not see the enhancements tab in the speakers properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.

  Also remove the audio codec in Windows Media Player.

  (a) open windows media player, and then press Alt key.

  (b) click on Tools, select plug-in and click on the option.

  (c) select plug-ins tab, and then under category, click Audio DSP.

  (d), select all the files in the DSP Audio box and click Remove.

   

  Method 3: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See the help article
  Tips for solving common audio problems.
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue.

• No preview image when using the filter flow therefore cannot see the changes I make up by clicking on the window of fluidity.  No way of knowing what is happening to the image while it is happening.

  Re: the fluidity in the last update PS CC filter.  When you use the filters of flow, how can I see the changes that I do while I'm using the filter tools, as I've always been able to do before?  Now, if I use the tool dilation or contraction tool, etc., I can't see the effect of what I did until I click on the window of fluidity and make to the main screen of PS.  This makes the tools unnecessary fluidity.

  Also check if see the background is checked.

• Satellite L500 - Create System Image - errors on the media

  The Satellite L500 series, I tried 3 times to create an image of C: System with the help of Windows 7, but each time on checking image files created, I got the message "backup Windows found errors on the media while saving a top backup & can not be used for additional backups.

  I tried in Windows to restore from this DVD, but he acknowledged even the backup DVD Win.

  Discs used: Sony DVD - R 16 x, & twice on DVD + RW (4 x), used straight out of the box (no formatting by me).

  Any ideas what I am doing wrong, or if b some into conflict with programs that I use?

  In my opinion, this question is for Microsoft. As far as I know it is the functionality of Windows and the laptop manufacturer has not much to do with it.
  Can you create upward on the second partition of HARD drive or even on external HARD drive?

• Satellite P850/P855 - How can I disable the trackpad light?

  Hello

  I recently bought the laptop model mentioned on the title, and I would like to know how do I completely disable the light of the trackpad.

  By disabling the trackpad lights up and even if I go to
  -> Synaptics Poinitng device-> device-> internal pointing device Settinngs disable when external USB pointing device is attached the light remains active.

  Is it possible to turn it off, no matter if the trackpad is on / off?

  Thanks in advance

  Hello

  Do you want to disable only the light or feature full touchpad?

  To disable and enable the use of the FN + F5 (or just F5) touchpad keys

• Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

  Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

  I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
  You can also consider its under warranty.
  Any ideas anyone?

  Hello

  It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

  > and when using the laptop without a windows mouse explore 'restore down' at random.
  >
  > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

  Whereas it should be, where´s now the problem?

  Please give clear and understandable feedback, then I and other users you could point to the solution.

  THX

• What type of layer should be used when using the effects lighitng filters "I can't using the way I expect to work -

  What type of layer should be used when using the effects lighitng filters "I can't using the way I expect to work -

  I want to add lights to he image - and to inform the parties of the image - I duplicated the layer add the lights in the filters, but it does not act as a process additive-

  Check out this tutorial from Phlearn on YouTube. It is a bit more flexible, but, of course, requires a bit of elbow grease more Photoshop-wise.

  Create beams of light in Photoshop - YouTube

  Using this technique, you can adjust the 'lights' as you want by manipulating setting masks. See screenshot below. (Still once again, excuse the butchering.)

  

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

  When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

  Windows Media Player is not a Publisher.

  You can use Windows Movie Maker to split
  and combine audio files, but it works better
  If they are in the. WMA format.

  Also the free Audacity software may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity

  http://Audacity.sourceforge.NET/

  How to split a long recording into multiple files or CD tracks?
  http://Audacity.sourceforge.NET/Help/FAQ?s=files&i=split

  How to combine two files into one longer file?
  http://Audacity.sourceforge.NET/Help/FAQ?s=editing&i=join

  How to mix songs with Audacity
  http://www.ehow.com/how_5061510_mix-songs-audacity.html

• I get the "No. Drive Detected" message when I try to use the media Sonic program in XP?

  With this message, I get no choice of reader to choose the player not to "read" cd or dvd?

  Hi Mr. Benjamin,.

  1. don't you make changes before the show?
  2 do only when you use the media Sonic?

  We recommend that you download and run the Microsoft Fix and check if the problem persists.
  See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

  If the problem is only with the sonic program, then try to reinstall the program and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.