Satellite Pro L10 and Bt travel 2100

Similar Questions

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Satellite Pro L10 and WLAN connection

  One of my clients claims that the wireless connection is not displayed in fact at all and he now believes that there is no wireless connection.

  The L10 was problems with does not appear before wireless connection?

  And if so is it possible to fix it.

  Hi Graham

  It will be interesting to know what model of Satellite has your customer (L10 - xxx). It is possible that the device has no wireless network card onboard. Please check the underside of the laptop. Usually, there must be a small label WLAN.

  If the device has a wireless network card which should also be listed in the device under network adapters Manager.

  Good bye

• Satellite Pro L10 and Vista compatibility

  Hi all.

  Being a 3rd year computer science student I feel like I should be able to answer this myself, but since this is a laptop and not a desktop computer, I'm stumped.

  I'm looking to upgrade to Windows Vista when it launches and I ran the compatibility for her Wizard and its lifting to the top a major - the graphics card. Now, I know that it is not possible to switch from a graphics card on a computer laptop because its actually on the motherboard itself, but it says that my Intel 82852/82855 GM/GME Graphics Controller has 64 MB of memory and requires 128 mb.

  So here's my question - is - a can move the memory associated / assigned to this card?

  In addition, he said that it must have the support of 32 bit / pixel which once again is not my card. An update of the driver would help or should I resign myself to the fact that Windows Vista won't be compatible with my laptop.

  Bravo guys,.

  Scott

  Hello

  The fact is that this card was delivered with a 64 MB shared memory graphics card.
  This is a maximum value of the memory that the card can manage.
  I wonder every day on the question about Windows Vista and compatibility issues. The fact is that Windows Vista is not official on the market.
  I'm sure that Toshiba will support the Vista in the future, but right now, there is no drivers Toshiba for this OS.

• WLan signal is poor and often loses connection - Satellite Pro L10

  I have a Satellite Pro L10 and a home network, where I used two Belkin and Netgear Routers ADSL Wireless.
  My L10 always reports very low signal and often loses the signal unless I'm VERY close to the router.
  I have three laptops and a desktop at home and they all have very high or excellent signal.

  I changed my router and even installed a Netgear wireless card in the L10 (in case there is a problem with the Intel Pro/Wireless 2200BG, but he pointed out again and again a weak signal.

  Someone else had this problem?

  Hello

  Try please install the latest driver designed by Intel. You can find it on http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good luck!

• Satellite Pro L10: where can I get a better graphics card

  Hey

  I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?

  Thank you very much

  Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.

  Good bye

• Satellite Pro L10: BIOS passwords again

  Hello!

  Tonight one of my friends brought me his Satellite Pro L10 and asked me to remove the user password, cose she dislikes grasp every time... OK, it's very simple! -I said. I went to the BIOS with the same password, found the supervisor password option and turn off the power. I could not enter the user password option and left him, thinking I'll fix this later... Well...

  Can you imagine how I was surprised when the system says - password invalid! More... I tried to go back to the BIOS, but system asked me a password... but I deleted "Supervisor password" well, I typed the old one and it does not again!

  Ok. Of course, later, I found the manual for this Satellite Pro L10, I know that it might be preferable to use the Toshiba Console and Toshiba HWSetup could be.

  Tell me, please, supervisor password had priority, and now she has to remember his user password?
  Or there is something else?

  Thank you!

  Post edited by: dimy4

  I studied a bit on the Toshiba knowledge site (it s very useful and interesting) and found this knowledge base article:

  Satellite L10 - setting the BIOS and supervisor passwords
  http://support.toshiba-tro.de/KB0/FAQ5300WK001GR01.htm

  Check it out. Maybe it helps.

  Additional, as I know if is not the BIOS password, you cannot delete it by yourself. Only the service guys are able to remove unknown BIOS password.

• Satellite Pro L10 does not illuminate

  I have a Satellite Pro L10 and it stopped working yesterday. It won't turn on or charge up. No show of lights on the laptop when the charger is connected. I plugged in another toshiba charger but still no luck.

  Does anyone have ideas on what could be the problem with it and if it is easily resolved. The laptop is about 2 years old. Thanks for your help

  Hello

  Seems not beautiful it is maybe something wrong with the electronic power on the card mother s in this case the motherboard must be replaced to solve this problem

  But maybe you are a lucky guy and only the power adapter malfunctioning Yes, I know that you have tested the laptop with another power adapter, but are you sure that the second captain is supported?

  Anyway, in my opinion, nobody here can provide a solution exactly because without diagnostic tests we don t know what could be wrong
  This is why I recommend to contact the technician of the ASP for a help

• Cannot burn CDs on Satellite Pro L10

  I have a Satellite Pro L10 and impossible to copy data files to DVD/CD player. I go through the process by using the Editorial Assistant and it appears to download the files, but finishes with a screen that says "cannot complete the CD Writing Wizard" and ejects the CD. The CD is empty, but the displayed size went from 720 mB to 647 mB of free space and total size.

  This was not always the case, because it worked when I first got the L10. The L10 has Windows XP

  Any ideas please?

  Hello

  Are you trying to burn the files using clean combustion of Windows?

  Hmmm I put t like this feature of Microsoft. I use a 3rd party software to burn data and files on CD or DVD.
  It s Nero burning ROM.
  This tool is really nice and I have not noticed problems using this software.
  You should also test this tool and I'm sure that you will be very satisfied.

  But back to the error message that appeared during the burning process;
  After a lengthy investigation on Microsoft pages, I found very useful knowledge base article Microsoft and information;
  http://support.Microsoft.com/kb/324129

  The error messageError: cannot complete the wizard of CD writing ofmay occur if the IMAPI CD Burner service is shut down. To resolve this problem, make sure that the service is running and that it has not been arrested. By default, the service is set to manual. Start the IMAPI CD Burner service and then test it by writing on a CD - R or a CD - RW. If the service is running, you may need to set the service to automatic if it does not start in manual mode.

  To set the service to automatic, follow these steps:
  1. click on start, run, type services.msc /s in the Open box, and then click OK.
  2. double-click on IMAPI CD - Burning COM Service.
  3. under the service status, click Start.
  4. try to write data to a CD.

  Good luck

• Satellite Pro L10-> I want to increase the memory

  I have a Satellite Pro L10 and want to increase memory. The manual accompanying it refers to "Chapter 7, unfortunately there is no chapter 7, annex just."

  Could you please tell me if I need specific to a type of memory card and also let me know what I need to do to install it because I've never done anything like this before.

  Thank you very much in advance
  Allan Robson

  Hello

  You must simply 200-pin PC2700 modules SODIMM (333 Mhz) DDR.
  You can increase memory up to 1024MB. So, you can use modules of 2 x 512 MB max

  You can also take a look at this page:

  Toshiba Satellite Pro L10 - 118 memory

  I hope it's interesting and useful

• Satellite Pro L10: upgrade CPU?

  Hello

  I have a Satellite Pro L10 and I was wondering if it was possible to upgrade the processor. I currently have a Mobile Intel Pentium M 725, 1600 MHz processor.

  Does anyone know what the best available (if any) CPU I could update?

  Thanking you in advance

  Alex

  Hello

  Upgrade CPU on laptops is not easy and certainly not possible.
  Why?

  Well, in this forum, you will find a large number of discussions on this endless theme.

  How about this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=103247

  See you soon

• Satellite Pro L10: USB on and goes off when I try to use the USB modem

  I have a mobile broadband usb t-mobile I want to use it on my Satellite Pro L10.
  When I attach to one of the usb ports then the laptop it is, but it loses then every 10-15 seconds (without interruption).

  I'm on XP Pro and usb Sockets work very well for a USB and a printer.
  I also tried to fix via a hub with external power usb and a pcmcia card with usb port, with exactly the same results.

  It works perfectly on my wifes laptop, it seems to be a conflict or a software problem.
  I flashed the bios and updated as well as seems relevant that I can.
  I continue updating the drivers etc, but in the meantime, I was wondering if anyone had any bright ideas?

  A healthy idea of mind is considered, it is starting to drive me up the wall! Mike

  Hey Buddy,

  T-mobile USB broadband have you? I mean if you could tell us what model you have maybe we can discuss it further. By the way: you said about your wife the USB - stick works machine. What operating system your computer laptop wife´s have?

  Would be interesting to know these facts; either by the way, I think it s more programs given that your material seems fine.

  Would appreciate feedback of your regarding your question.

  Greetings

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Satellite Pro L10 Memory Upgrade

  Hello

  I have a Satellite Pro L10 Celeron M Processor 360 1.4 GHz / XP HE / 256 MB / 40 GB / 15TFT / DVD-CDRW / OneNote. I wanted to upgrade the RAM, and I noticed that in the manual it says:

  Before installing a new module memory 512 MB do not forget to remove already installed memory modules.

  Does that mean that I can not install a 512 MB module and more the 256 MB is already a total of 768 MB?

  Thanks for any advice,

  Luis

  Hi Luis,.

  The specifications of your laptop indicates that it can accept up to 1 024 MB of RAM. If you have 2 RAM slots, so you can use any combination of modules of RAM as long as you do not exceed the maximum quotes. Of course if you have only 1 RAM slt then you must remove the original 256 MB module before insert you new 512 MB a.

  HTH

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.