Satellite Pro L10 and WLAN connection

Similar Questions

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Satellite Pro M40 - no WLan connection - driver missing?

  I recently reinstalled Windows XP on my Satellite Pro M40, which eliminated all drivers for WIFI etc.

  I tried write the drivers on the toshiba site on drive on this PC and then install on the other PC, but still have no connectivity...

  Any ideas?

  Stand by.
  Some unknown device is listed in Device Manager?

  I'm not 100% sure but I think your M40 Atheros WLAN card inside. Please visit http://aps2.toshiba-tro.de/wlan/?page=downloads and try to download and install WXP driver Atheros WLAN Card.

• Satellite Pro L300-156 - WLAN connection drops every 12 hours

  Hello!

  I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

  The system state is:

  I used the recovery CD (to install Windows XP and other software on this CD).
  I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
  I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

  The problem is still there:
  Every 12 hours (exactly on the minute!) drops connections.
  Not only the Internet, but the local connection.
  It is even a kind of matrices.

  Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

  These ping connections not, they die instantly in a tenth of a second.

  Hello

  I guess it can be caused by a 3rd third party tool that was installed on your laptop.

  I mean it of really strange that disconnected EXCATLY after 12 hours of use.

  "I have goggled a bit for the message: network error: Software caused connection abort."
  And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

  I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

• Re: Satellite PRO 4600 and WLAN driver

  My old Satellite Pro 4600 connects with networks wireless unsecured very well but has a problem with WEP - Gets an error message immediately to connect command, never reaches the authentication dialog.

  I would try to update the drivers of wifi card, but where can I find them? This site does not recognize not my serial number.

  Can someone please?

  Thank you.

  -Kari-

  This along with the serial number reorganization probably works with new laptops only.
  Go directly to the download section Toshiba > http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and under archive try to find your model of laptop and WLAN driver.

• Satellite Pro L10 and Bt travel 2100

  Just bought new laptop L10 and have a BT Voyager home router. The laptop connects with Netgear and other connectors, but under no circumstances will connect with my BT Voyager 2100 to the House.

  Nobody knows the answer to this problem, and are they compatible?

  Thank you

  Hello Dudley

  You say that your device can connect to Netgear and other connectors, but not at Voyager BT.
  In this case I n t think that it s a malfunction of the notebook.
  In my opinion you should to check the settings of the BT Voyager (IP, Getway, etc.).
  Also, I guess that please contact the manufacturer of the BT Voyager for more detailed information.

  I found a cool site. Visit this link:
  http://www.Voyager.BT.com/2100/prodinfo.htm

  Good bye

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?

• C870-1F3 satellite - cannot use and WLan connection

  Hello

  My father had this laptop with windows 8 during about 6 to 8 weeks, everything was ok, but today it can not connect wireless at all, if I plug in the modem the internet works fine.

  I tried loo t to the net - and tried FN and F12 but no joy, I don't know what Dad has done,

  I know the macafee's exhausted recently will this affect anything.
  Told me one day a wireless switch might not be on, but I do not see a switch anywhere.

  can someone help?

  There is no other option to activate the Wlan with the exception of the pressing F12 (Fn + F12)
  But we must start with the basics:

  You must go to the Device Manager and check if the wireless network adapter is recognized in the list of available devices.
  If its recognized, this means that WLan driver is installed and working properly.
  If it is NOT recognized, you need to install the correct driver Wlan (located on the Toshiba UE driver page).

  After that, go to Control Panel - Network Sharing Center
  On the left you will see the option called manage wireless networks.
  Until it clicks. New window will open. Here you can see that all configured Wlan networks.
  In the event that your Wlan isn t listed, click Add and configure the right help WiFi network SSID, encryption, and password encryption. Even if the WiFi network is recognized, you can remove the Wlan and could run through the Setup again.

• Satellite Pro L10 and Vista compatibility

  Hi all.

  Being a 3rd year computer science student I feel like I should be able to answer this myself, but since this is a laptop and not a desktop computer, I'm stumped.

  I'm looking to upgrade to Windows Vista when it launches and I ran the compatibility for her Wizard and its lifting to the top a major - the graphics card. Now, I know that it is not possible to switch from a graphics card on a computer laptop because its actually on the motherboard itself, but it says that my Intel 82852/82855 GM/GME Graphics Controller has 64 MB of memory and requires 128 mb.

  So here's my question - is - a can move the memory associated / assigned to this card?

  In addition, he said that it must have the support of 32 bit / pixel which once again is not my card. An update of the driver would help or should I resign myself to the fact that Windows Vista won't be compatible with my laptop.

  Bravo guys,.

  Scott

  Hello

  The fact is that this card was delivered with a 64 MB shared memory graphics card.
  This is a maximum value of the memory that the card can manage.
  I wonder every day on the question about Windows Vista and compatibility issues. The fact is that Windows Vista is not official on the market.
  I'm sure that Toshiba will support the Vista in the future, but right now, there is no drivers Toshiba for this OS.

• WLan signal is poor and often loses connection - Satellite Pro L10

  I have a Satellite Pro L10 and a home network, where I used two Belkin and Netgear Routers ADSL Wireless.
  My L10 always reports very low signal and often loses the signal unless I'm VERY close to the router.
  I have three laptops and a desktop at home and they all have very high or excellent signal.

  I changed my router and even installed a Netgear wireless card in the L10 (in case there is a problem with the Intel Pro/Wireless 2200BG, but he pointed out again and again a weak signal.

  Someone else had this problem?

  Hello

  Try please install the latest driver designed by Intel. You can find it on http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good luck!

• Satellite Pro L10 does not illuminate

  I have a Satellite Pro L10 and it stopped working yesterday. It won't turn on or charge up. No show of lights on the laptop when the charger is connected. I plugged in another toshiba charger but still no luck.

  Does anyone have ideas on what could be the problem with it and if it is easily resolved. The laptop is about 2 years old. Thanks for your help

  Hello

  Seems not beautiful it is maybe something wrong with the electronic power on the card mother s in this case the motherboard must be replaced to solve this problem

  But maybe you are a lucky guy and only the power adapter malfunctioning Yes, I know that you have tested the laptop with another power adapter, but are you sure that the second captain is supported?

  Anyway, in my opinion, nobody here can provide a solution exactly because without diagnostic tests we don t know what could be wrong
  This is why I recommend to contact the technician of the ASP for a help

• Satellite Pro L10: where can I get a better graphics card

  Hey

  I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?

  Thank you very much

  Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.

  Good bye

• Satellite Pro L10: BIOS passwords again

  Hello!

  Tonight one of my friends brought me his Satellite Pro L10 and asked me to remove the user password, cose she dislikes grasp every time... OK, it's very simple! -I said. I went to the BIOS with the same password, found the supervisor password option and turn off the power. I could not enter the user password option and left him, thinking I'll fix this later... Well...

  Can you imagine how I was surprised when the system says - password invalid! More... I tried to go back to the BIOS, but system asked me a password... but I deleted "Supervisor password" well, I typed the old one and it does not again!

  Ok. Of course, later, I found the manual for this Satellite Pro L10, I know that it might be preferable to use the Toshiba Console and Toshiba HWSetup could be.

  Tell me, please, supervisor password had priority, and now she has to remember his user password?
  Or there is something else?

  Thank you!

  Post edited by: dimy4

  I studied a bit on the Toshiba knowledge site (it s very useful and interesting) and found this knowledge base article:

  Satellite L10 - setting the BIOS and supervisor passwords
  http://support.toshiba-tro.de/KB0/FAQ5300WK001GR01.htm

  Check it out. Maybe it helps.

  Additional, as I know if is not the BIOS password, you cannot delete it by yourself. Only the service guys are able to remove unknown BIOS password.

• Cannot burn CDs on Satellite Pro L10

  I have a Satellite Pro L10 and impossible to copy data files to DVD/CD player. I go through the process by using the Editorial Assistant and it appears to download the files, but finishes with a screen that says "cannot complete the CD Writing Wizard" and ejects the CD. The CD is empty, but the displayed size went from 720 mB to 647 mB of free space and total size.

  This was not always the case, because it worked when I first got the L10. The L10 has Windows XP

  Any ideas please?

  Hello

  Are you trying to burn the files using clean combustion of Windows?

  Hmmm I put t like this feature of Microsoft. I use a 3rd party software to burn data and files on CD or DVD.
  It s Nero burning ROM.
  This tool is really nice and I have not noticed problems using this software.
  You should also test this tool and I'm sure that you will be very satisfied.

  But back to the error message that appeared during the burning process;
  After a lengthy investigation on Microsoft pages, I found very useful knowledge base article Microsoft and information;
  http://support.Microsoft.com/kb/324129

  The error messageError: cannot complete the wizard of CD writing ofmay occur if the IMAPI CD Burner service is shut down. To resolve this problem, make sure that the service is running and that it has not been arrested. By default, the service is set to manual. Start the IMAPI CD Burner service and then test it by writing on a CD - R or a CD - RW. If the service is running, you may need to set the service to automatic if it does not start in manual mode.

  To set the service to automatic, follow these steps:
  1. click on start, run, type services.msc /s in the Open box, and then click OK.
  2. double-click on IMAPI CD - Burning COM Service.
  3. under the service status, click Start.
  4. try to write data to a CD.

  Good luck

• Satellite Pro L10-> I want to increase the memory

  I have a Satellite Pro L10 and want to increase memory. The manual accompanying it refers to "Chapter 7, unfortunately there is no chapter 7, annex just."

  Could you please tell me if I need specific to a type of memory card and also let me know what I need to do to install it because I've never done anything like this before.

  Thank you very much in advance
  Allan Robson

  Hello

  You must simply 200-pin PC2700 modules SODIMM (333 Mhz) DDR.
  You can increase memory up to 1024MB. So, you can use modules of 2 x 512 MB max

  You can also take a look at this page:

  Toshiba Satellite Pro L10 - 118 memory

  I hope it's interesting and useful