Satellite Pro L10: Enter key malunction

Hello.

On my Satellite Pro L10, the Enter key does not work. I tested it in the BIOS and it works but it does not work in Windows XP. If someone from the software fixes or advice I would be very grateful

Hello

It's a very strange question, but you should be more specific about this. How did you test the feature key of entry? Is there the same result if you use Notepad or the same conversation programs Office applications? Your device's pre-installed with recovery media?

As much as I know it isn't common Windows problem and it is unclear to me that there is a patch for this problem.

Tags: Toshiba

Similar Questions

  • Satellite Pro L10 multimedia keys

    Hello
    I have problem with media player and multimedia keys.
    When I listen to music (Media Player is minimized in my task bar) and I want to go to the next/previous track using the multimedia keys it always causes restoration of the window of the media player. I tried to reinstall the hotkey utility, but it does not change the behavior of the multimedia keys. I don't know how to change that because it irritates me that I have to minimize Windows Media Player each time when I change the song.
    Thanks in advance.

    Hi viper

    I have Satellite 1900 and on my machine there are buttons to control the media player on the front of the laptop. I checked on my unit and this doesn't happen. Sorry, but I can't explain why this happen to you, but try to check all the settings on Windows media player.

  • Can not get my Satellite Pro L10

    I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

    Hi James,

    Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

    Kind regards

  • Satellite Pro L10 boot password is not the same as in HWSetup

    I recently got a laptop Toshiba Satellite Pro L10 by my employer. I entered a password and then confirm the password again in the configuration of HW from Toshiba in Control Panel of Windows XP. Then I clicked on the recommended option. No string or password was displayed in the box under Registered.

    Since then, I was not able to boot up the laptop as the password that I entered Setup of HW is not recognized by the laptop started upward. I tried to type the password with caps lock, shift, and numlock on also. Are there any bugs or fault with defining a password for starting in the HW configuration utility? If there is a fault or a bug I would have preferred that the portable computer password is removed under the guarantee.

    If I have to pay a Service partner.

    Hi Geoff

    On this path, it is not easy to tell what's going on exactly, but I assume that your employer has implemented BIOS password. You can enter the BIOS settings by using the F2 key at startup?

    The BIOS password removal is not part of the guarantee and it must be paid. In my opinion, you must bring the laptop to your employer. He probably has Admin rights and it can set up passwords on the right track.

  • Satellite Pro L10 - 135 no recovery disk, need to restore

    Hello

    We have a Satellite Pro L10-135: Intel with Windows XP.

    The laptop is a few years old and is full of spyware, my partner has also accidentally deleted some program files. I have removed all personal files and would like to completely reformat the unit as long as the plant.

    But she lost the recovery CD. I tried to get them at Toshiba, but when I enter the serial number it says that its too old and the drive is not available. I also tried to find the Toshiba recovery disc creator, but on the menu start, is found instead it says Start > all programs > Toshiba > Networking or start > all programs > Toshiba > utilities.

    I need the process to be fool-proof, because I'm not too confident with computers, so I would get a real restoration of Toshiba, rather than who to download drivers, etc..

    Anyone know where I could buy or download the disc in the United Kingdom?

    Thank you very much.

    It is always an issue with the old models of laptops, but what you can try is to contact the nearest Toshiba authorized service provider in your country and ask for help.
    Maybe they have archived somewhere old recovery disc and can help you with this.

    One last thing: very often, I see people offer on eBay recovery disks.
    Check it out. Maybe you will be lucky and find the recovery for your model of laptop disk there.

  • Satellite Pro L10 - recovery does not work

    I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

    For a drive partition error checking - please try again!
    Press a key to continue...

    When you press a key, then I get another white screen like this:

    X:\ >

    X:\ >

    I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

    Hello

    Please format the HARD drive again and remove all partitions on the HARD drive.
    Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

  • Satellite Pro L10: BIOS passwords again

    Hello!

    Tonight one of my friends brought me his Satellite Pro L10 and asked me to remove the user password, cose she dislikes grasp every time... OK, it's very simple! -I said. I went to the BIOS with the same password, found the supervisor password option and turn off the power. I could not enter the user password option and left him, thinking I'll fix this later... Well...

    Can you imagine how I was surprised when the system says - password invalid! More... I tried to go back to the BIOS, but system asked me a password... but I deleted "Supervisor password" well, I typed the old one and it does not again!

    Ok. Of course, later, I found the manual for this Satellite Pro L10, I know that it might be preferable to use the Toshiba Console and Toshiba HWSetup could be.

    Tell me, please, supervisor password had priority, and now she has to remember his user password?
    Or there is something else?

    Thank you!

    Post edited by: dimy4

    I studied a bit on the Toshiba knowledge site (it s very useful and interesting) and found this knowledge base article:

    Satellite L10 - setting the BIOS and supervisor passwords
    http://support.toshiba-tro.de/KB0/FAQ5300WK001GR01.htm

    Check it out. Maybe it helps.

    Additional, as I know if is not the BIOS password, you cannot delete it by yourself. Only the service guys are able to remove unknown BIOS password.

  • Satellite Pro L10: How to remove the user password

    Hello

    I work for a school and we have a bunch of laptops Satellite Pro L10. I put a supervisor on all laptops password think this problem would be solved (I didn't enter a password each time the machines are enabled), but one of our students seems to have found its way to the HWSetup utility in Control Panel and could save a user password on one of the laptops.

    Alarmingly there seems to be no way to clear the password of the user, even though I have the supervisor password. I can get the BIOS as a supervisor, but the definition of a user password option is grayed out. Can anyone provide a solution for my problem?

    Thank you

    Hello

    Well, I think that this problem could be solved by updating the BIOS to the version 2.60 or greater.
    But the problem is that the password has already been fixed.

    I read in the paper of Toshiba that all passwords must be removed before starting the BIOS updates.
    That's why I think it would be advisable to contact Toshiba service partner to remove first the user password, and then update the BIOS.

    You know it's very risky to update the BIOS of the device when the user or any password has been set.
    It of possible that the BIOS update procedure will be interrupted if the password exists.

  • Satellite Pro L10 and Windows 7 drivers

    Hi guys,.

    I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
    XP drivers do not work.
    If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

    I look forward to your responses.

    Thanks in advance for your responces
    Panos

    Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
    According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

  • Satellite Pro L10-103 - USB ports not working not

    Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

    Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

    Hey Buddy,

    As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

    After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

    In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

  • Extension memory Satellite Pro L10

    Hello

    I have a satellite Pro L10, which has only 128 MB of RAM. I want to wear this but can't find any information about it in the manual.
    I would like to know,

    How much RAM, I put in the L10?
    What type of RAM the L10 take?
    It's like a stick or two?
    Where can I buy this type of RAM?

    concerning

    David U

    Hey there,

    It has no internal memory, 2 locations available, 128 or 256 MB at 1 location, PC2100 DDR - RAM 333 MHz, 1024MB max

    You can buy the RAM from all :) any store on the computer or online from Toshiba.

    See you soon

  • Satellite Pro L10 Memory Upgrade

    Hello

    I have a Satellite Pro L10 Celeron M Processor 360 1.4 GHz / XP HE / 256 MB / 40 GB / 15TFT / DVD-CDRW / OneNote. I wanted to upgrade the RAM, and I noticed that in the manual it says:

    Before installing a new module memory 512 MB do not forget to remove already installed memory modules.

    Does that mean that I can not install a 512 MB module and more the 256 MB is already a total of 768 MB?

    Thanks for any advice,

    Luis

    Hi Luis,.

    The specifications of your laptop indicates that it can accept up to 1 024 MB of RAM. If you have 2 RAM slots, so you can use any combination of modules of RAM as long as you do not exceed the maximum quotes. Of course if you have only 1 RAM slt then you must remove the original 256 MB module before insert you new 512 MB a.

    HTH

  • Satellite Pro L10 will not start the system

    Hello!

    I have a Toshiba Satellite Pro L10, which won't work for some reason any.

    The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

    It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

    There is also a 30 second countdown if I do nothing the portable samekh automatically.
    It is, none of these things work.

    Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

    He did about 50 times now and still nothing.
    I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

    Help, please!

    If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

    hope this makes sense and I gave you all you need to know.

    Thanks, B

    It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
    If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

    In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

  • Satellite Pro L10 - what sound card I have?

    Can someone tell me please what sound card has the Satellite Pro L10?
    All I know is that it is an integrated, but need to find the drivers for it, as I don't have my original master computer disc with me here in College, but to do my sound!
    Thank you
    Rob

    [Edited by: admin on 22 January 06 08:58]

    Hello

    Your device has Conexant CX20468-31 AC97 Audio Sound Card.

    Good bye

  • IRQ conflict on satellite pro L10

    I had problems using a capture card to PCMCIA data with a new satellite pro L10. I used the same card on other laptops with no problems. I think the problem is to do with the conflict on the IRQ channel, because both the card and the controller cardbus use the same channel. I tried to change the IRQ channel manually with the Device Manager, but it does not accept the change. Someone has suggestions how to change the IRQ channel or anything else that might help?

    Hello

    Unfortunately I'm not familiar with this, but please check this article http://kadaitcha.cx/irq_conflicts.html maybe you will find the solution to your problem.

    Good luck!

Maybe you are looking for

  • 'Accessibility preferences' has stopped working

    I've implemented (thru "accessibility preferences") my macbook air to respond to voice commands. Last night, it worked, but today, my laptop is unresponsive to voice commands. When I put in place, I created new commands to 'Choose' a specific applica

  • Updated graphics on MacBook Pro which has the iris intel pro 1536 and the card nvidia geforce GT 750 M

    Hello world I was wondering if it would be possible to update the graphics card from nvidia, which is in my macbook pro 15-inch. Im not too tech savvy so I figure that I would like to ask the community. This laptop has the iris intel pro as well a nv

  • How to disable the Windows 7 startup splash screen

    After that the PC starts the "sign-in" screen comes up. Click and go to the desktop and the program of your choice. If reading or not active on the keyboard or the mouse in about 15 seconds the start screen comes back. All view timers are defined for

  • Extension memory for my Satellite 1900

    Have a Satellite S1900-303, want to 1 GB. the manual States 144pin so-dimm pc133. Some Web sites to check memory recommended as 200pin, nothing on the site of Toshiba on this model, which is correct please?

  • Satellite C850D - Downgrade from Windows 8

    I have a Satellite C850D, which was shipped with Windows 8. I want this downgrade to Windows 7. I have a Windows 7 DVD, but when I try and install it I get is an error message indicating that there is an error with one of the startup files. Is it pos