Satellite Pro L10 stops spontaneously

Old L10 of 4 years of my wife (Windows XP) has recently developed a habit to stop without apparent reason.
There is no error message. It doesn't seem to be overheating.

The stop is not associated with a particular software. It occurs when it is to use.
It is causing her great irritation and since she is waiting to resolve the problem I'm under pressure!

Any ideas, please?

Did you look in Event Viewer? Maybe, you can find the reason why the laptop stops.
The laptop closed or off?

If the laptop shuts down software may cause this. Maybe a virus or something else.

Make sure that there is sufficient free space around the laptop. Otherwise, it might be overheated.

Tags: Toshiba

Similar Questions

  • FAN of buzz on my Satellite Pro L10

    After 30 to 60 minutes of work to the fan on my Satellite PRO L10-PSL15E hum early, or else close to her. The buzz stops when I press on the body of the laptop, but only for a short time and then starts again. Need help for sorting!

    Hi Ruslan,

    You can access options from Control Panel-> Performance Toshiba power management and management. Normally, this will show both the Microsoft Options, but also the Toshiba ones.

    Kind regards

  • Satellite Pro L10 cut just randomly

    New satellite Pro L10, with XP Pro and Linux dual boot.

    Randomly, sometimes once a week, sometimes several times on, it will just cut. Just Litrally disable itself (as there is no power?). Occurs in Windows and Linux.

    Subsequently, I constantly press the power button so he can go back on. Yes, fully charged. Occurs when it is connected as well.

    Any suggestions?

    Thank you

    Hello

    For me it's s like an overheating problem.
    If the temperature drops to the critical limit the operating system the device automatically stops.
    The cooling fans simply cleaning with a vacuum cleaner to solve these issues.

  • Intermittent WiFi on Satellite Pro L10 D WAP - Link

    Equipment: new Satellite Pro L10 with Centrino & integrated Intel Pro 2200BG wifi and D-Link DWL2100Ap wireless access point. The new laptop works on the neighbor's wireless network (all day), and my Sony notebook working on our D-Link network based. However the new Toshiba works for awhile the first thing in the day (maybe 2 hours) and then stops working at an increasing rate. The afternoon he will not work for more than about one second.

    For most, however, the icon says that it is connected and free config says that it is connected; See her ranges from wireless networks - different bits of the system are in disagreement on the status of the connection, but no data flow.

    The D - link WAP has always said he has the Toshiba as a customer. Select 'repair' normally runs for a second or two.

    He always seems to have a number allocated IP, IPCONFIG - however, if I try to connect later in the day and is already having an IP address, it may not stay connected for long enough to get a.

    Very frustrating. Any help appreciated.

    Hello

    Well it s very strange.
    You said that the work of laptop on the neighbouring s wireless very well.
    In this case I n t think that it s a problem with wireless network card.
    Try to check your router settings.
    Maybe you can compare your settings with the neighbors.

    Good bye

  • Satellite Pro L10 - Unmountable Boot Volume

    My Satellite Pro L10 loops in the boot process. After the Windows XP splash screen, the following error messages appears:... Unmountable boot volume... Technical information: Stop: 0x000000ED...

    I know that is nothing exceptional and do a full restore would solve the problem. But I don't want to lose the data (which are of course not saved). I tried a Windows XP disk, but it does not start from the cd/dvd drive by pressing F12 or <0>and change the boot order...

    Can anyone help please?

    Hello

    Hmm, the volume not mountable startup error message appears especially if the HARD drive may not be recognized during initialization. Why? Well, maybe the HARD drive failures or the master boot record is defective!

    If you don t want to recover the laptop, you can try to boot from the XP CD (C press immediately after switching on the laptop) and to start the repair console.

    In the repair console, you can use the command chkdsk/p and after that, you could fix the disk main boot using the fixboot command or / and fixmbr.

    If this does not help, the new installation of the OS is that you as a last resort.

    PS: If you want to save the data you can try to remove the HARD drive and try to connect it via external USB HDD controller to another computer.

  • Satellite Pro L10 does not illuminate

    I have a Satellite Pro L10 and it stopped working yesterday. It won't turn on or charge up. No show of lights on the laptop when the charger is connected. I plugged in another toshiba charger but still no luck.

    Does anyone have ideas on what could be the problem with it and if it is easily resolved. The laptop is about 2 years old. Thanks for your help

    Hello

    Seems not beautiful it is maybe something wrong with the electronic power on the card mother s in this case the motherboard must be replaced to solve this problem

    But maybe you are a lucky guy and only the power adapter malfunctioning Yes, I know that you have tested the laptop with another power adapter, but are you sure that the second captain is supported?

    Anyway, in my opinion, nobody here can provide a solution exactly because without diagnostic tests we don t know what could be wrong
    This is why I recommend to contact the technician of the ASP for a help

  • Loss of wireless connection on Satellite Pro L10

    I have a Toshiba Satellite Pro L10, with wireless capabilities built-in. I recently bought an ADSL Modem Belkin Wireless G Router. My desktop PC can connect to the internet via cable and cannot therefore have my laptop. However, when I connect to the internet via wireless connection my laptop sometimes everything stops. This isn't something to signal that I'm only about 2 feet from the router, and it is not that I can't connect to the internet, as I am on this at the moment. Is that in a few minutes, the connection will be lost and I can't seem to find what I can do about it.

    The other problem is that when I click the icon at the bottom right of the screen, the "Wireless network connection" window opens. Here, it shows the wireless network I'm trying to connect and it shows with a strong signal, but it is almost always said not 'connected '. He said never 'connected', even when I am connected to the net and surf away!

    Anyone has any ideas at all?

    It sounds a little to the Wireless LAN card is unable to obtain a valid IP address.
    These interruptions may occur for different reasons.
    But especially the new version of the driver Wlan and/or Bios should help resolve these interruptions.

    What card Wlan do you use?
    If you are using the Intel Wlan card you can also visit the Intel Web site to download the most recent version of the WLan driver.
    Please also compare the BIOS version available on the Tosh site with the version preinstalled on your laptop.

    Wlan card properties contain some useful options that could improve the quality of the connection. Energy saving options should also be required to check other functions in the tab advanced and disabled.

  • Satellite Pro L10 and Windows 7 drivers

    Hi guys,.

    I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
    XP drivers do not work.
    If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

    I look forward to your responses.

    Thanks in advance for your responces
    Panos

    Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
    According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

  • Satellite Pro L10-103 - USB ports not working not

    Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

    Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

    Hey Buddy,

    As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

    After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

    In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

  • Extension memory Satellite Pro L10

    Hello

    I have a satellite Pro L10, which has only 128 MB of RAM. I want to wear this but can't find any information about it in the manual.
    I would like to know,

    How much RAM, I put in the L10?
    What type of RAM the L10 take?
    It's like a stick or two?
    Where can I buy this type of RAM?

    concerning

    David U

    Hey there,

    It has no internal memory, 2 locations available, 128 or 256 MB at 1 location, PC2100 DDR - RAM 333 MHz, 1024MB max

    You can buy the RAM from all :) any store on the computer or online from Toshiba.

    See you soon

  • Satellite Pro L10 Memory Upgrade

    Hello

    I have a Satellite Pro L10 Celeron M Processor 360 1.4 GHz / XP HE / 256 MB / 40 GB / 15TFT / DVD-CDRW / OneNote. I wanted to upgrade the RAM, and I noticed that in the manual it says:

    Before installing a new module memory 512 MB do not forget to remove already installed memory modules.

    Does that mean that I can not install a 512 MB module and more the 256 MB is already a total of 768 MB?

    Thanks for any advice,

    Luis

    Hi Luis,.

    The specifications of your laptop indicates that it can accept up to 1 024 MB of RAM. If you have 2 RAM slots, so you can use any combination of modules of RAM as long as you do not exceed the maximum quotes. Of course if you have only 1 RAM slt then you must remove the original 256 MB module before insert you new 512 MB a.

    HTH

  • Satellite Pro L10 will not start the system

    Hello!

    I have a Toshiba Satellite Pro L10, which won't work for some reason any.

    The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

    It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

    There is also a 30 second countdown if I do nothing the portable samekh automatically.
    It is, none of these things work.

    Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

    He did about 50 times now and still nothing.
    I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

    Help, please!

    If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

    hope this makes sense and I gave you all you need to know.

    Thanks, B

    It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
    If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

    In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

  • Satellite Pro L500 - stops when the power cord removed

    Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

    Someone please help. I have not installed anything new.

    Hey,.

    For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

    I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

    You can find a list of all FSA here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • Satellite Pro L10 - what sound card I have?

    Can someone tell me please what sound card has the Satellite Pro L10?
    All I know is that it is an integrated, but need to find the drivers for it, as I don't have my original master computer disc with me here in College, but to do my sound!
    Thank you
    Rob

    [Edited by: admin on 22 January 06 08:58]

    Hello

    Your device has Conexant CX20468-31 AC97 Audio Sound Card.

    Good bye

  • Satellite Pro L10: Enter key malunction

    Hello.

    On my Satellite Pro L10, the Enter key does not work. I tested it in the BIOS and it works but it does not work in Windows XP. If someone from the software fixes or advice I would be very grateful

    Hello

    It's a very strange question, but you should be more specific about this. How did you test the feature key of entry? Is there the same result if you use Notepad or the same conversation programs Office applications? Your device's pre-installed with recovery media?

    As much as I know it isn't common Windows problem and it is unclear to me that there is a patch for this problem.

Maybe you are looking for

  • Why can't see CarPlay as an option in the settings on my 6s 9.3.2?

    I have two two 9.3.2 of the identical 6s, there CarPlay option in the settings and there is no. Someone knows why?

  • Media center stopped playback recorded movies

    Media center stopped playback recorded movies

  • DVD burning problem

    Hi everyone, recently I had a problem when burning dvd with original writer of windows (windows 7)the 1st dvd fail to burn, the 2nd burn very wellThis is the case for almost a week, I lost half my DVDs, and I really want to stopI tried a lot of solut

  • How to see the models VI3 on Virtual Server 4.1

    Hi allI'm migrating my old infrastructure VI3 (ESX3.5U5) to a new vSphere 4.1 a.That I create a new database on V4.1 I have to disconnect all virtual Center2.5 ESX3.5 to connect tp Virtual Server 4.1.I have a lot of templates on each ESX3.5 but when

  • PDF of naming using para.style applied

    Hi Forum!Any body could twist on this script.please.While runnig the script, I could able to export PDFS. The pdf of naming will be content inside the document on everypage, on which paragraphStyle "Title" is applied.The problem is, if the pargraphSt