Satellite Pro L300 - cannot use Intel ProSet WLan tool with Win XP

Hello! I have the same problem. I installed a XP SP3 and I can't use the * Fn + F8 * hotkey to activate the WLAN function on or off. Other Fn keys work correctly. The WiFi network also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work. It seems "no wlan driver installed. The card is a Realtek 8187 B, downloaded the driver on Toshiba support original site. What can I do?

> WLan also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work
If the WiFi works fine using the windows zero configuration then the WLan adapter is enabled and don t get the FN + F8.

The fact is that your 3rd party WLan configuration tool doesn t work because your wireless network card is * Realtek! *

Intel ProSet ONLY works with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have an Atheros Wlan card.

You have Realtek so use windows own zero configuration WLan!

Tags: Toshiba

Similar Questions

  • Satellite Pro L300 - cannot use the 4 GB memory full

    My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

    I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

    I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

    > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

    This chipset uses this device?
    There are different L300 with different chipsets and different hardware components.
    Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

    So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

    Welcome them

  • Failed to retrieve the Satellite Pro L300 laptop using Toshiba Recovery Disk

    I have a Satellite Pro L300 Vista I'm trying recover using the recovery disk Toshiba official that the machine is not able to retrieve from the hard drive.

    The process gets as much as to start recovery utility and asking to select the language in the utility recovery which I emphasize English and then select next; It moves on the next screen, which is empty and then it just hangs.

    Any suggestions?

    You bought your laptop with the Vista version English?
    What language is marked before selecting English?

  • Triggers of Ctrl Key Caps Lock on Satellite Pro L300 - cannot open a session

    Hello

    I can't work my keyboard opn my satellite pro L300, I plug an external keyboard to log on.
    All the keys seem to work except the Ctrl key that activates the caps lock when I press on it.

    Ive scanned for viruses, reset the default keyboard settings and run the diagnostic tool and still no luck.
    My daughter can you press a combination of keys when she was on the phone active whiuch some lock but how do I reset it?

    Hello

    Check if the FN + F10 and FN + F11 are not enabled.
    If the FN + F10 and FN + active F11were, then you should see a green LED under these buttons. Check it out.

    Otherwise it s I do not know that any other combination of keys can remap the keys on the keyboard. for example; CTRL key to lock caps

  • Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

    Hello!

    I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

    Now, I can't use any PCMCIA card.
    Everything works fine, but I can't use two PCMCIA slots.
    The cards will be recognized, but the system says that there is a resource conflict.
    (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

    Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

    Please, help me!

    Someone got an older version of BIOS?
    My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

    I have to downgrade the BIOS to at least 2. 6.

    Bye,.
    Martin

    Have you tried installing WXP again using Toshiba Recovery CD?
    I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

  • Satellite Pro L300 PSLB1U - can't find WLan driver and

    I can't find the drive for my computer.
    So cannot use the wireless and the "peripheral modem on high definition audio bus" material also does not find the drive.

    Please help me!

    Thank you

    Hello

    I think that this model of laptop belongs to the series Toshiba us and therefore you should search in the Toshiba page we WLan drivers

    If you will not find the driver on the Toshiba page you will need to check your WiFi chip and then you could download it from the website of the manufacturer of chips.

    Then the MS hotifxes as on the need to bus modem device high definition audio first * KB835221 * and * KB888111.*
    Then you have t install the modem driver, then the audio driver.

    Good bye

  • Satellite Pro L100: USB2 drivers do not have compatibility with Win XP

    SAT Pro L100 - I loaded the USB 2 drivers received using a prolific USB to Serial Comm Port (Sunix - UTS1009B) a single port USB to serial port cable.

    In each instance of loading the drivers message appears "did not the Windows Logo test for compatibility with Win XP. If continue or stop, drivers do not work.

    Seems as if there is a problem loading the USB 2 drivers. need assistance?

    Expensive branded

    That s nothing unusual.
    Many 3rd party drivers have not been tested by Microsoft and the message appears so that the pilot didn't make the Windows logo test for compatibility with Win XP!

    But if you use a driver that was designed for Win XP, you just continue and finish the installation.

    So, don t worry not and follow these steps!

    Best regards

  • Satellite Pro A10 - cannot install Intel graphic driver

    Hello

    I m wondering I ve been on the Intel site to get the disc for my graphics card that Toshibas is old Intel have a 1 latest release for my view controller and when I download and try to install it, it says cannot continue please contact the manufacturer of your computer.
    Can you help me please because there must be a way to get it?
    Thank you

    Hello

    As a general rule, you should always use the Toshiba drivers because they are specially designed for these graphics cards.

    Good bye

  • Satellite Pro L300 - cannot install software for USB 3.0 Expresscard

    I try to install AKE USB 3.0 expresscard to a Toshiba L300 Pro running Windows 7. The laptop recognises the ExpressCard but the software does not correctly install if the unit will not operate.

    Tried the drivers NEC & fresco provided with the unit and also tried other drivers for AKE downloaded fron internet but still no joy.

    Has anyone ever loaded into the software for a USB3.0 expresscard successfully? The laptop will have USB 3.0?

    Any help would be appreciated.

    If the software doesn't install correctly, try to contact the manufacturer of the card and ask for help.

  • Satellite Pro L650: cannot use Skype - cam and microphone are not connected

    Having problems connecting to Skype.
    It seems that the microphone and web cam are not connected.
    Skype self-test will not respond with the voice test.

    Hello

    Have you checked the Skype settings?

    There, you should check if the right microphone and the internal webcam have been chosen.

    By the way: is the webcam properly recognized in Device Manager?

    You can use the webcam using the preinstalled software webcam?

  • Satellite Pro U200: Cannot use TABLET TACTILE power utility

    Hi guys, help me please.

    My computer gives me this error message "'THotKey' recovery failed. "Error code: 0 x 00031402, 0x00000002" and with it, I can't use my Fn key and when I try to open the folder of toshiba, it gives me the same message.

    Could you please help.

    Thank you

    Maiko

    Hello Maiko

    It will be interesting to know since when this error occurs. Try to roll back OS to an earlier time using System Restore tool. Maybe after that that the problem will be solved. If this isn't the case, please post again.

    One last thing: you can also try to install common modules again. You can find it on the download page of Toshiba.

  • Toshiba Satellite Pro M30 cannot use USB 2.0

    I can't use USB 2.0 on my laptop (OS = Windows 2000).
    Where can I download this driver-USD for this Board (Toshiba laptop motherboard).

    Greetings

    Hello

    Have you seen yellow errors such as exclamation points in Device Manager?
    If not, in this case it of not necessary to install all the drivers.
    Moreover, the operating system automatically recognizes the USB ports.

    But what USB device doesn't work? As far as I know if this external device needs more energy than the 500mA so it is possible that the operating system can not recognize this device.
    In this case you need an external power supply for this part or you try to use the USB hub.

    Good bye

  • Satellite Pro L40: Cannot use special characters in the password Bios

    Hello

    Why I can't use special charters on password bios?

    If I but of special charters on password, System don't use the exp.
    Password: * Aur! nk0 system seems only * Aurnk0 * and do not give errors when I put the password!

    I hope that this case of fixed security...

    ARO
    Mikko

    Hello

    This isn't some sort of bug BIOS but you can only use letters and numbers for the BIOS password!

    You visit the user guide for the details!

  • Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

    I have a L875 Pro of the Satellite with Blu - ray burner.

    I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.

    I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.

    I play Blu - ray movies and dvd movies, blu ray player was fine.

    I found information on the appropriate corresponding to the burning speed dvd disc speed.

    How do I know what speed the burner support?

    How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)

    It would be great if someone respond and make the drive burn discs.

    As a first step, it will be interesting to see why you cannot create recovery discs.
    Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.

    Is there an option to create the USB stick recovery?

    Combustion under Win8? Have you tried to use some burning as NERO applications?

  • Satellite A300-1EG - cannot use the command buttons (play, stop) Win XP

    Hello.

    I have a problem with my Toshiba A300-1EG with good software Toshiba Control Center for Win XP, because I do not know how to import a brightened sense Key (PLAY, STOP, FORWARD, BACK).

    Toshiba offers a poor software on own site.
    I can change only 2 buttons (SOUND ON / OFF and ON AUDIO PLAYER).

    Help!
    PS. Sorry for my English

    Hello

    The play, pause, stop buttons and following can not be changed!
    You can use it with Windows Media Player or WinAmp (if you enable the option in Winamp).

    See you soon

Maybe you are looking for