Satellite Pro L300: Option of USB Power on / off mode "sleep"?

Similar Questions

• How to usb power turn off mode 'sleep'? Yes were asked and no, it has not yet responded.

  until someone says "its been answered" and "look at other messages ' u try these directions and let me know if it works. cause I did, and if you're smart enough, I'm sure you can understand my result of posting me my question as well.     I had older versions of windows (xp and 98) and when the computer was put in mode 'sleep' it wouldn't keep turn on/off devices.  Now in windows 7, it's a totally different story. What ould iw as is for the usb power switch off appliances like the old way. Francis IS at ALL possible? because of everything I've seen here, it DOES not work.  No, changing the thing selective usb to allow disabling power management GOLD DOES not work. NO, by checking or unchecking the checkbox in the Device Manager, etc., for the USB ROOT HUB to "allow the device to turn off the power" or whatever it says DOES NOT work either.  All what I want to know is, is possible to do this, turn off the power for something as simple as an external fan or a hard drive will be TURNED OFF like it USE TOO. Please do not post instructions on how to do the 2 steps that I mentioned. Really annoying because it's what keeps popping up for everyone to do and then you see inside people answer "N" T WORK."   And also do without consulting me the manufacturer for support, cause this is the problem of MICROSOFT, is not a problem of the Lim.  A lot of people have this problem, microsoft turns, find something here...

  It is also for period of SLEEP mode. Yes I know he doesn't put into hibernation, and judgment, to my question here. That's the mode 'sleep'. Thanks for all who have comments/instructions USEFUL. Nice day

  See the responses on this thread

  If you want to manage the setting through the registry, you can paste the following text in Notepad and save to a .reg file and import or manually create the keys.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USB]
  "DisableSelectiveSuspend" = DWORD: 00000001

  -Sumesh P - MSFT.

• Satellite Pro L300 - use of the power cable between the countries

  I'm buying a Toshiba laptop Satellite Pro L300 T4200 everything here in New Zealand, where I will be staying for the next six months. However, I'm heading back to Alaska (United States) in April.

  Someone could answer my concerns about the use of power cables and to buy once back in the States. for the most part is it safe to use a USA power cable in this laptop bought NZ without breaking something to bits?

  THX, kim3300

  When you return to the States, I think that you must travel kit adapter power supply only.
  I recommend you consult your dealer and gathering information that it will be the best for you.

• Satellite Pro L300-152 lose the power connector - how to disassemble it?

  I have a Satellite Pro L300 - 152 unit, which is out of warranty.
  I have a bad power connector, it has been pushed back and be dislodged from his seat or brocken cradel is within the computer.

  I am trying to remove the back to see if the power connector can be repaired or remains in its cradle.
  I removed all the screws and all devices, but can not get it off the computer.

  There seems to be something with the keyboard, which I took.

  Can you help me?

  To fix the power connector the whole notebook must be disassembled and you must have access to the motherboard. Disassembly procedure is not complicated if you have maintenance manuals and instructions.
  To have full access to the motherboard, you must remove all the screws from the underside and also all the screws under the keyboard. You will then be able to separate the notebooks and disassemble the upper.

  Tell me exactly what you have removed so far?

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Power supply adapter new satellite Pro L300-12Y

  HI, I have a laptop Satellite Pro L300-12 years and my adapter is beyond saving. Were can I get a new one? I couldn't find any so I ask you directly

  Hello

  You can order a new adaptor AC to a Toshiba ASP in you country.
  You can also check the reference number of the old power adapter and can perform a search on the internet using this part number for a replacement part.

  Welcome them

• Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

  * + Hello + *.

  I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
  Already everything works because I had a compilation of drivers copy of the past.

  The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

  So I tried with the power that said safety program to:

  Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
  And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
  Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

  So, how to control the peripheral power turn off on?

  Bq. * + thanks for your attention and patient. + *

  Hello

  Firstly the Toshiba Power Saver requires the installation of the common Module.
  The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

  So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

  In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
  Is the laptop supports the Intel wireless network adapter?

  AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
  Check it!

• Chicony usb 2.0 webcam stopped working when I update from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 computer laptop

  When I upgrade the operating system from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 laptop, Chicony usb 2.0 webcam no longer works showing a message "webcam driver open fail.please restart camera or computer".in Device Manager the status of the camera says "this device is working properly".to go the control panel I select camera assistant software and clicked on change and when I try to repair a pop-up window with a message "Please insert disk 1 that contains the file data2.cab" is displayed. I tried to give the path of the driver (I have Vista), but it did not work.

  I need help please!

  Hi Aynalm,

  You can check the following link and try to download display Utility for Windows 7 drivers, and check if it helps.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2336263&RPN=PSLB9U&modelFilter=L300-EZ1521&selCategory=2756709&selFamily=1073768667

  Also check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Satellite Pro L300 - required external power supply (power car)

  Hi all

  I have a Toshiba Satellite Pro L300 and want to plug it into my car supply.
  The battery is 10.7 volts and the charger is 19 volts. I do not think that plug into the car is causing a problem, but there is no mention of this in the manual.

  Has anyone tried this and it worked great.
  I didn't wan't to recharge the battery just to be able to run the laptop for more than the battery allows.

  Hello

  You need a car adapter to connect the laptop to the 12V car

  Looking in google for adapter cigarette lighter for Satellite Pro L300?
  To do this, and you'll get some hits

  Otherwise, you can order this part of the Toshiba authorized service partner in your country.

• Satellite Pro L300: Noise of nasty when connected to your hifi installation comments

  Hi, thanks for reading,

  I just bought a Satellite Pro L300, to use for DJing. I use a Behringer USB mixer, and when I plugged it to the top there is a sound really bad comments coming out of my speakers.

  I tested it in the headphone jack output by connecting the laptop directly to my sound system and I hear the same comments.
  I went to check through troubleshooting and audio driver settings, everything seems fine.

  I thought then he might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped. I tried to use a different power supply to an old laptop and the noise starts again.

  Is there anyway that I could solve this problem? I need to run food as the custom of the last battery life long enough while I DJ.

  Thanks in advance

  > so thought that it might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped
  I agree with you and Akuma appears that this noise is related to the question of land
  In many cases, different people said they could solve this by using a 3 cable and AC adapter power cord.
  These special adapters can be ordered from the authorized service partner.

• Satellite Pro L300 29V - hard drive is dead

  I have a Toshiba Satellite Pro L300-29V only about 2 months, and suddenly the hard drive (very full) is apparently dead.

  Initially the laptop starts Windows correctly, but now the HD is not yet recognized in the BIOS. If it goes beyond the Toshiba splash screen, I get the thing PXE saying "a cable is unplugged. I tried to re-allocation of places the reader twice, but still nothing.

  It's really disturbing, because I had transferred recently practically my whole LIFE on it on other computers which many many many hours of musical recordings that I can't really afford to lose.

  I think I'll have to buy a HD dock and see if I can read and copy the data.

  Does anyone else have this problem? It is likely that the drive could have been erased?

  I should also mention that a day or two before this happened, my girlfriend was using etc. Open Mobile (Internet Explorer, Microsoft Word,) - computer I pressed the power button that normally makes hibernate - and when I turned it back, rather than resume where he left off, the computer started from zero and no work/windows were saved.

  I'm afraid that might be some stupid day, Avira, or on the Windows updates without end that has damaged something...

  EDIT: OK, I have a picture of the error I received before complete failure, but I can't download it here. Here is the text (on a blue screen):

  -----
  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.
  If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use safe Mote to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  * Technical information: *.

  * STOP: 0 X 00008086 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000) *.

  -----

  Post edited by: atomicnut

  Hi mate,

  First of all, I must say that I have this Satellite L300 too. But I didn t have no problem, the HARD drive works fine for 1.5 years and I use this laptop for Internet and emails everyday. I m very satisfied.

  However, what do you hear now?

  I hope that you can copy your data to another device and you will need a new HARD drive for your Satellite Pro L300. That's fact!
  In addition, there are a few good programs that they can the recovery of data from faulty hard drives. Just search with Google, you will find some interesting links.

  Good luck!

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Re: Satellite Pro L300 - screen resolution maximum?

  I just bought an external monitor for my L300. The screen resolution is 1920 x 1080, but the maximum available on my L300 is 1280 x 800. The utility Service Station tells me that all my drivers are up to date - is there a way I can increase the graphics resolution? Any suggestions much appreciated!

  Details: Running Windows 7 Pro SP1 on a satellite Pro L300 PSLB9A - 02K 002

  Hi PeterSouthon,

  Need to unlock the other screen resolutions. Simply uncheck the option Hide modes that this monitor cannot display as you can see on [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo.

  After unchecking this box, you should be able to use the native screen resolution of your external display.

• Satellite Pro L300 - commissioned only in safe mode

  Hay, my Satellite Pro L300 computer can be started in SafeMode only because if I start it normally it access to the desktop and then freezers.

  Can someone help with this problem?

  Hey Buddy,

  If the computer starts only in safe mode, this means that something has confused the OS

  Since when have you noticed the problem?
  No doubt it can help you to restore the system to a previous point. If it doesn t help your only option seems to be to reinstall Windows I think. Therefore, you can use the Toshiba Recovery drivers with tools disk :)

• Satellite Pro L300 does not illuminate

  Hi all, I'm new to this forum.

  I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
  But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

  Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

  Can someone help me please?

  See you soon.

  Hello

  There are several indicators;
  DC, while running, the main battery, LED HDD/ODD.
  So I guess the power LED flashes in orange. Right?
  This means that something was wrong on the motherboard.
  Maybe power supply electronic malfunctions

  In this case, there is no much to do only mobo replacement could help to...