Satellite Pro L300 - what with firewire port express card?

Similar Questions

• Satellite Pro U300-143 - Boot OS SSD Express Card

  Is it possible to boot OS SSD Express Card inside the slot?

  As verbatim:
  http://www.verbatim.it/it_10/product_ssd-ExpressCard-64gb_31_0_15800__5184.html

  Thank you.

  Hello

  It would be possible if the BIOS would provide such support.
  But as far as I know the BIOS support booting from:

  * USB floppy drive, HARD drive, ODD, Network (LAN), USB memory *.

  As you can see booting from Express Card is not supported.

• Satellite Pro L300 - what I can reinstall Vista with the recovery disk?

  Hey

  I dual-boot (running Windows Vista & Win7) and if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  And I have another drive on my computer for recovery Partition so I can use my recovery CD to reinstall Windows vista if I want once I got rid of him and would it erase my win7 disk or remove the duel boot?

  My specs are:
  Intel Pentium
  2 GB OF RAM
  Hard drive 160 GB

  > if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  You can use the recovery disk to reinstall Vista on your laptop but as Luke mentioned, the recovery disk would format the whole HARD drive. It would erase all partitions on the HARD drive and you will lose also the installed Win 7!

• Satellite Pro L300 - what order of connection is fair?

  Some people recommend to plug the adapter into the wall outlet before connecting the laptop. They believe that the removal of the load (ie. the laptop) to the adapter reduces inrush current. They also believe that this protects the laptop from any power surge caused by the starting currents.

  Why? Because like me, many people have noticed sparks when it connects the adapter to the wall outlet or the receptacle, IE. Sparks jump between the pins of the plug and the wall socket. An explanation that I found is this:

  "Most of these supplies is called"switching"supplies. Basically, they apply the voltage to the output and turn it off very quickly when desired pressure is reached. This type of operation tends to distort the waveform of the incoming line. (Harmonics).
  To minimize this effect, a capacitor is placed in the entrance. If initially energized (connected) a capacitor is basically a short dead. This causes a huge inrush current of current for a VERY short period. So the spark. "

  The Toshiba manual says first connect the adapter to the laptop, then plug the adapter into the wall outlet.

  This procedure is recommended for security reasons, IE. fears that a person will get a shock when you plug the adapter into the laptop? Because that first connect the laptop eliminates any risk of this power connector, and then plug in the wall socket is a common experience that people learn very early to be careful with.

  So is it only for purposes of security, or are there technical reasons for laptop to do first and then taken?

  Is it possible to plug in the wall outlet first and then the laptop gives better protection to the electronics of the laptop?

  Concerning

  First I put t understand why you create double threads?
  You have already started this discussion here:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=148523

  Double son not permitted! If you follow old thread.

  With regard to your question;
  I first connect the adapter to the laptop, and then I plug the AC adapter into a wall socket cable as described in the user manual.

  But usually it s no matter where you ordered it will connect
  Sometimes I unplug the computer laptop power adapter and use it only with the battery but the adapter remains connected to the wall outlet

• Satellite Pro L300-software-service says I need update graphic driver

  I downloaded the software http://designbyme.lego.com/en-us/default.aspx DesignByMe

  The installation runs without a problem, but when I start the program it restarts again and again. The charge of doesn´t photo entirely, instead of this there are black spots. I have can´t click on anything that either, or near programm. I thought that maybe the installation process has not completed correctly so I downloaded the software again, but the problem is always the same. I m using a new Satellite Pro L300 28w with Windows 7 and Mozilla Firefox 3.6

  I contacted the support of lego and they replied: "probably you need to update your graphics driver. Please contact your customer computer manufacturers website for updated free"

  Is this possible and if so what edo upgrad I need?

  Hello

  I put t know if the update of your display driver can solve this problem, but if the manufacture of the software said that it s worth a try! ;)

  The update is simple enough: first download the latest version here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have downloaded the latest version, remove the old first. Check the list of software in the control panel and follow the instructions on the screen. I guess you have to do a reboot and after that, you can install the downloaded version.

  Good luck! :)

• Problem with satellite Pro L300 Ethernet controller

  Hello

  I have a Satellite Pro L300 (PSLB9A - 02L 001). Have'nt after being on the dial for the year last I was wireless (it worked well before that) but am now back on broadband but I don't seem to have any wireless.
  Checked the Device Manager and there is a yellow exclamation next to the ethernet controller and it seems there is no pilot, but apart from that, there is no further details. I tried to update the driver but it cannot find the driver on my computer and it will not search the Internet for this.

  I tried, but none of the drivers I downloaded seems to work...
  At the back of the computer laptop is a sticker - PA3613U-1MPC, I think it's the wifi card that is missing the driver but I can't find a driver for it for the life of me...

  Any help would be wonderful.
  Daryl in New Zealand

  You are right. This part number is WLAN Card. I put t know what operating system you use but for download driver Atheros http://aps2.toshiba-tro.de/wlan/?page=downloads WLAN

  I hope this will help.

  What is now with LAN driver? Do you need it too?
  In any case, visit the Toshiba support page under http://www.mytoshiba.com.au/support/download and there you should find good LAN driver for your model of laptop.

  Send comments.

• Problem with some keys on Satellite Pro L300

  Hello

  I have a problem with the keyboard on my Toshiba Satellite Pro L300. I can not type 'a', 'q' and 'z '.
  ESC, F1, tab and Caps Look are also don't work.
  I don't spill any liquid on my PC. Need help please, I don't know what to do. Thank you

  You have the latest model of laptop. If there is a problem with the hardware keyboard will be replaced free of charge.
  I recommend you contact the nearest authorized maintainer and ask for help.
  With diagnostic programs, they can check the functionality of the keyboard, and see if the keyboard needs to be replaced.

• Satellite Pro L300 - no sound with Win7 64

  I have the laptop according to:

  [Satellite Pro L300-1AF | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=1058007&DISC _topSpeed = 1 & service = UK]

  I installed Win7 on the laptop, and now I can't get any sound. When you set the volume control, the level display changes on the operating system, so I guess everything is ok with the connections. I tried many different drivers, including the currently recommended drivers, as well as all the previous pilots (including drivers for different versions of the VICTORY, as suggested on some forums) after many hours trying to solve the problem, nothing seems to work.

  Any ideas or suggestions?

  Hello

  This means that the sound card is properly installed in Device Manager and you don t have no yellow exclamation?

  Perhaps portable speakers are silent. Simply press the combination of keys FN + ESC enable/disable sound.

• Trouble with the Satellite Pro L300 Ethernet controller driver

  Hello

  I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

  Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

  I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

  Realtek_LAN_56861032008_XP.exe

  install
  installed in a folder named c:\ "DELL"-(WHICH can not be move?)
  drivers R86360
  OF this dossier, I do the "setup."

  broad com 440 x - installs as everything is good,
  made just TWO yellow controllers.in etha...
  \
  but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

  Can someone please point me in the right direction.

  Thanks in advance...

  Steve

  Hello

  It seems that the Australian model, try this one:

  http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

• Toshiba Satellite Pro L300 web cam problem with windows 7

  Hello Greysmouth I have the same problem you had. the problem with chicony webcam of Toshiba Satellite pro L300. Do you have a solution for this? can you please tell me how solve you this problem.

  Thaks much expensive.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Satellite Pro L300 upgraded to Win8 but I would like to update the drivers

  I have upgraded to Windows 8, but I found the Wifi adapter needs to be reset frequently (it seems to be without a cause) - Troubleshooting Windows 8 solves it by resetting the adapter, but I thought there will be a fix for this?

  When I tried to update the drivers I found that the L300 is not (in the not extensible or expandable lists)-is the L300 compatible in this respect by another model? Or can you suggest how to update all the drivers of Toshiba for this model.

  Thank you

  Your Satellite Pro is the model of laptop old enough and not supported for Win8.
  It is difficult to find drivers for the notebook not supported models and old.

  Problem is that if you make the decision to do so anyway you are on your own and can be all just lucky if everything works properly.
  > is the L300 compatible in this respect by another model?
  It is not easy to give you the right answer. What needs to be done is to compare each hardware component important as chipset, GPU, chip sound, LAN/WLAN with other models and see if some Win8 drivers are available. It is not so easy.

  For example: Toshiba Satellite pro L300 offers 4 different hardware platforms. One you have? What is the model number of your machine?

• Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

  I have a Satellite Pro L300 with Windows Vista and it has been fickle to say the least, making me restart the system several times.
  The last two times she since continued to come up with an error message saying "cannot open ACPI ATK0100 Kernel Mode Driver", and I understand that it is perhaps what is originally that there problems later.

  I tried updating the BIOS, reinstall the drivers and, seeking answers and, of course, reinstall the whole system, but I still get this message every time I turn on my laptop and I really don't want that it gives me the blue screen of death again - please help me!

  Thank you.

  Stand by.

  You ve done clean install of Vista with initial recovery DVDs and you get this error in any case (no additional software is installed)?

• Satellite Pro L300-1AF fails to start

  I have a Toshiba Satellite Pro L300-1AF that won't start, it stopped working a few weeks ago and I tried startup repair and things, and nothing seemed to work just kept loading a black screen with a cursor but nothing else. After a little more research, I found out how to restore to factory settings holding the 0 key etc. when I tried this he got 54% then the screen everything went black and now it used to boot. It happens with just:

  -Unable to start windows. a recent hardware or software change might be the cause.

  file:\Windows\system32\winload.exe
  status: 0xc000000e
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He also says to insert your installation disc, but I have not one when I bought it.

  -What this means and how can I solve this problem? I tried the factory restore and just make it even worse.

  Any help or advice would be much appreciated

  Hello
  > He also says to insert your installation disc, but I have not one when I bought it.
  That's your first problem. This model laptop was delivered without disc recovery but the preinstalled software that allows you to create a recovery media. All this is clearly described in the document s user manuals.
  Now, your original Vista operating system has disappeared. On this path virtual I can't say with certainty what the problem is, but somehow, I think the HARD drive's troublemaker.

  What to do now? First you need the Windows installation for the installation of the OS disc. Original Vista may not be used more so my advice to you is to get the Win7 32 bit install disc and try to install it on your machine. Win7 is entirely compatible, so there is no problem to install all the necessary drivers, tools and utilities.

  By default the BIOS settings and try to install Win7. If the same problem recurs and Setup will stop I m afraid HARD drive is defective. If possible, try to get another HDD for testing purposes.

  You know you have to play a bit with your machine now and find out what the problem is.