Satellite Pro P100 - network adapter disconnects

Similar Questions

• Satellite Pro L300 - network adapter failure

  I was running my Satellite Pro L300 on a Belkin router connected to my DELL desktopsuccessfully wireless, except that sometimes the adapter on the Satellite failed and I had to restart the portable computer to restart.

  The other day I decided to reinstall windows XP on my desktop, because he soon grindingly.
  All worlks OK and I can access the internet from the desktop and my laptop is picking up the signal from the router but will not let me connect.

  The network shows under available networks, but when I try to connect it says "windows could nto connect to the WLAN.
  The network icon has a red line through it. I updated the driver and according to copntrol Panel operation.

  Am posting this from my office

  Hello

  Try this;
  -Start the console (in run, type CMD)
  -In the DOS window type; ipconfig / renew

  This should renew all your network cards and must assign the IP again.

  Using the ipconfig command, check if the wireless adapter is listed in the list.

• Can I increase the memory on my old Satellite Pro P100?

  I have a Satellite Pro P100 (P6PA4E-002001EN) with only 512 MB of memory and the desire to know if it can be increased and if so what memory should I buy and it is easy to open the machine and adapt?

  Hello

  You can increase the memory on this laptop amazing plu of 4 GB of RAM.

  RAM modules compatible that you can use to upgrade:
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit)

  Check the underside of your laptop and there should be probably set with a cover of Ram screw. Remove it and you will have access to the memory locations.

• Satellite Pro P100 - Synaptics touchpad problem with Win 7

  Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
  The original driver had an option "disable when the external pointing device connected.

  I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

  It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
  So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

  Thank you

  Hello

  Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
  Choose the touchpad Win 7 drivers out for a satellite L500 series.

  By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.

• I can't write CD on Satellite Pro P100-347

  I was recently bought a Satellite Pro P100-347 with Windows XP MCE installed as a desktop computer (the store didn't inform the person who has bought a laptop that was not networked). We have purchased a full copy of Windows XP Pro and booted from the disk, formatted the hard drive and installed XP Pro instead of the ERM and then downloaded and installed all the drivers on the Toshiba site.

  I had the "failure to obtain read handle" error starting but followed the recommendations on this site and removed the toshibarc.exe of the registry. Now, the only thing I still need is to get the CD of drivers, because even though I can play CDs and copy on their part, I can't write CD - if I put a blank CD in the drive and select the option to create the writable CD folder, I get an error that says ' D: / is not accessible. Incorrect function. "

  I downloaded and installed the DVD-RAM drivers, but I can't find those specifically for the CD. Can anyone help?

  Thanks in advance,

  Jeremy Jones

  Hello

  In my opinion, you should check the properties of the disk and click the recording tab.
  CD recording option on this drive must be marked.

  I had a similar problem and this hidden option was responsible for registration on my laptop problems

• Satellite Pro P100 - battery fails to recharge

  Hello.

  I have an old Toshiba Satellite Pro P100, a given model to nine, I got 2 years ago.
  It has worked well since I got it, but I went overseas for a month and left my laptop at home.
  When I got home, I found that the laptop battery is not recharging.

  The battery on my desktop power indicator says 0% and requires a permanent connection to the network to work.
  I looked in the manuals, they tell you that a flashing amber light means low battery, but not what to do if it does not change.
  I also watched online, but they do not help either.

  I want to know is if there is a way to fix my battery or if I have to buy another.

  Thanx

  Hello

  It looks like a flat battery.
  But check the connection of the battery first.

  Remove the battery and shortly after connect again.
  If this will not help then you should replace the battery and should test the laptop using the new battery.

  Welcome them

• Re: SD card reader works only on Vista - Satellite Pro P100 pspa4

  Hello

  I have a Toshiba laptop Satellite Pro P100 pspa4 with Vista installed.
  I have my SD properly installed host adapter (well looks like in Device Manager)
  But absolutely nothing happens when I insert an SD card.

  I have a Mass Storage Controller not properly installed and I think that's the reason why, but I can t find any drivers for it.

  On XP, everything works fine.
  Anyone know where to find the drivers for that?
  On the Vista from Toshiba driver page I can only find drivers SD utilities.

  Thank you

  Hello

  On the European driver Toshiba page, you will find the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Try to reinstall and the SD card should work!

  See you soon

• Satellite Pro P100-124 starts upward, but nothing on the screen

  Hello world

  I'm a newbie here & laptop but my companion got a satellite Pro P100 (Toshiba Satellite Pro P100-124 PSPA4E-001001EN) & it is my asked for help. Here's the problem:

  Laptop starts to go through the procedure of starting with lights coming and cd player starts to work the rotation of fans, but nothing shows up on the screen

  I said it could be the graphics card but could do with a starting point, I'm PC savvy but on the desktop, it's my first attempt at a portable computer so please be nice...

  Hello

  Have you tried this thing?

  ->, remove the battery and unplug the AC adapter from the portable computer
  -> waiting for ~ 30 min 1 h
  -> connect the two parts again and try to turn on the device

  If this will not help, then it would mean that a hardware problem serious causes this problem and you will need to contact a Toshiba ASP technician to know exactly what s wrogn.

  Good luck

• Satellite Pro P100 - unable to connect to Internet via LAN

  I have a Toshiba Satellite Pro P100. Model no SPSA4A-005002

  I used my recovery disc and erased from my computer, because of a virus and now I can't connect to internet via cable but my wireless internet works perfectly.
  Its quite dead there is no lights on the back of the laptop where I plug in the cable.

  Hello

  Your network card is properly recognized in Device Manager?
  In your case, I would try to update the LAN driver. You can get the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, you check the version of the BIOS. The most recent version must be installed and load default settings here.

  In the worst case, it s only a hardware problem and must exchange the motherboard together :(

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• Satellite PRO P100 - 383 DVD UJ - 850 s Firmware update

  Hello

  My laptop is a Satellite PRO P100-383 with a DVD burner MAT * a UJ-850 s.

  The current firmware of my DVD writer UJ-850 s MAST * one is 1.10 and I can't write some DVD-R, because they are not recognized as DVD-R, but as a CD - R. I think it's just the firmware of DVD writer that is too old.
  Is it possible to update this with new firmware please? because I found something in the download section for my laptop. Just drivers and BIOS of motherboard, but nothing on the MAT * an update of firmware UJ-850 s.

  Thank you very much for your answer.

  Friendly.

  Philip.

  Hi Philippe

  In my opinion you shouldn't change something but use high quality blank DVD - R TDK or Verbatim.
  Maybe you use some blank media cheap and without name.

  Have you tested with known brands?

• Satellite Pro P100 - 11(d) crashed and Linux does not load

  Hello.

  I have a Satellite Pro P100 - 11(d) which have worked well since 2007 both with preinstalled Windows and Ubuntu last.

  But... Yesterday, Firefox crashes, I thought, but after the restart it was not able to load Ubuntu desktop, comes from a command prompt.

  I tried to reinstall the driver and xserver with no luck.
  Tried to reinstall Ubuntu together, but it stops while loading of Ubuntu live.

  Thought maybe, a hard drive crash so I want to wipe the entire hard drive and so reinstalled Windows, which wouldn't load after installation. Changed the hard drive to a WD250GB, but always the same - stop loading live Ubuntu and Debian and Meego...

  Has a verified memory from the live USB of Ubuntu (before loading Ubuntu), no errors.
  I have an idea that maybe the graphics, but it has no errors or defects to display install screens - graphics.

  Anyone have any ideas?

  Oh, I had Ubuntu while loading, try checking the hard drive and what makes some mistakes, why I thought it might be a hard drive problem.

  Thanks in advance
  Leif

  Hello

  What about another system? Windows?
  Can you start and install Windows system using the Toshiba Recovery disk?

  Generally speaking, it is not easy to say what has caused this problem
  It may be related to no hardware, a part even if the HARD drive or memory error was not detected, one of these parties may malfunction
  Worst case its something wrong with the motherboard but it s only a hypothesis.

• Satellite Pro P100 - GPU and CPU temperature question

  Hello

  I took my Satellite Pro P100 totally out, clean the radiator and vents.
  Also applied new thermal paste.

  The GPU is idling around 50 ° C fan always on
  The CPU is idling around 40-45 ° C fan always on

  To my other Qosmio G30 with a Geforce Go 7600, I got Idle at 35-38 ° C and about the same CPU!

  Then, normal time for the satellite pro or are there settings that I could use to reduce times?
  BIOS is the last of Toshiba, toshiba driver and win 7 power managemnt powersaving...

  Kind regards

  > The GPU is idling around 50 ° C fan always on
  > The CPU is idling around 40-45 ° C fan always on

  I put t think its too high in my opinion the temperature seems ok.

• Satellite Pro P100 - display 1440 x 900 upgraded to 1680 x 1050

  Hello

  I have a defective Panel in my Satellite Pro P100. Model No.: PSPAHE - 001001GR.
  Currently, it is a sign of Lp171wx2 with a resolution of 1440 x 900.

  I can change it for this Panel: LP171W02 with a resolution of 1680 x 1050?
  Will it recognize kind of Plug-and-Play? Better resolution and running as before. Or does not recommend or not even possible?

  Thank you very much in advance,
  Schwieger

  Hello

  I think he can.
  I know that the different models of Satellite P100 were equipped with two type of poster:
  17.1 inch, WXGA + (1, 440 x 900), color TFT display high brightness of amorphous silicon.
  17.1 inch WSXGA + (1 680 x 1 050), color TFT display high brightness of amorphous silicon.

  I m not very good if you could use the LP171W02, but the laptop would certainly deal a 17.1 inches, TFT WSXGA + (1, 680 x 1 050).
  You can also order a compatible part of a Toshiba ASP in your country.

• How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)

  I have just flashed the BIOS on my Satellite Pro P100 4.8.

  The CPU runs at 100%. (90% + for windows explore)

  Only a single core is recognized by my Vista gadget.

  85 CPU temperature

  How can I "downgrade" the BIOS? Where are the older versions?

  When the new BIOS version is available to download older versions are not available more.
  What Satellite Pro P100 you exactly (model name, model number)?