Satellite S50D-to-10F and external use with ODD

Similar Questions

• All new Satellite S50D-A-10F - DC to LIGHT does not come

  I hope someone can help me.

  I bought a portable computer by Satellite S50D-A-10F this weekend and the recommendation of quick start, to load and set up.

  The quick start guide says that when the laptop is plugged into the DC IN / seeing of the battery should light up, but I see no lights at all. I checked the charger/adapter in my old Satellite phone and it is fine.

  What's my new laptop faulty? I don't want to run the initial setup and find that the device is not cool enough to finish.

  Any ideas?

  Thank you.

  Hello

  Before we start our comments please download s manuals document and check pages 45 and 46 and read how it works exactly.

  If you still have questions let us know.

• Re: Satellite L735 PSK0CE: WLan and BT use the same frequency

  Hello world

  I reinstalled my Toshiba Satellite L735 - PSK0CE with Windows 7, until the one and download all the drivers for it, I did not too Wirelles conection, Lan and the wirelless use the same channell radiofrecuency than Bluetooth

  Can you help me with this problem?

  Thanks in advance

  Post edited by: aku - aku

  Hello

  WiFi and BT use the same frequency. For the most part this isn't a big problem but in case you notice a few connection problems with WLan or BT, you must disable WLan using BT or must turn off BT if you want to use the WLan.

• Satellite A215-S4747 (internal and external) microphone does not work

  Hello

  I write about my wife by Satellite A215-S4747 running Windows XP.
  A few months ago as the built-in microphone and external microphone has stopped working.

  This made me think it was a driver problem, although no issue in
  Control Panel > sounds and Audio devices > equipment for all drivers.

  I went through the Troubleshooting Wizard, but that did not help.
  I went and downloaded drivers RealTek HD Audio (R2.67), but that didn't fix it.

  Any help is very appreciated.

  Thank you

  Peter

  I want to emphasize that this machine is about 6 years old, making the possibility of some parts break most likely...

  Hello

  Sound works. Right? Well well, in that case I n t think that it is an audio driver problem.

  First of all, I think you should check some basic settings.
  (1) mic device.
  Go to the control panel-> sounds and Audio-> Audio-> sound recording devices
  Here you check if device right microphone has been selected

  (2) mic volume
  Go to the control panel-> sounds and Audio devices-> Audio-> audio-> Volume
  Here you check if the volume is at max level
  Additional button Advanced should be available at the bottom of the mic volume control click that it and check if the mic push in checked.

  Have you installed some tools or software which may affect (disabled) the microphone?

• Satellite A200 - HDD compatibility and more power with battery 9 cells

  I have a Satellite A 200 1 BJ with 4 GB of RAM, 300GB SATA HDD @4200 RPM (with 2 MB L2 Cache?) The warranty period is over. Is it possible to have an internal hard drive of 300 GB @7200 RPM with 8 MB of L2 Cache? Any idea on the cost?

  Also is it possible to get a battery 9 cells for my laptop?

  Hello

  I think that he should t be a problem to upgrade the 300 GB HARD disk. It should work.
  I put t know exactly how much it could be but still depends on the drive and the dealer making ;) simply google for certain offers.

  With regard to the issue of the battery;
  Well, you can check it out yourself. Toshiba Option & Accessories site offers options compatible notebook you;

  + http://eu.computers.toshiba-europe.com/-> peripheral services & -> Option & accessories +.

  Welcome them

• The extended and external use .c and .h class?

  Goal: Make main.c become smaller.

  Problem: When the .c file is created, eror show "implicit declaration of function 'show_dialog_message' [- Wimplicit - function-declaration]" on show_dialog_message

  Question: How to use class extended/external .c and .h? or something wrong in the following coding?

  Mini code: all the required classes are included.

  The main.c

  #include "helloworld.c".

  If (EXIT_FAILURE is {resize (event))}
  stop = true;
  }

  HelloWorld.c:

  int resize(bps_event_t *event) {}
  If {(event)
  snprintf (msg, MSG_SIZE, "Hello World!");
  show_dialog_message (MSG);
  }
  Return EXIT_SUCCESS;
  }

  HelloWorld.h

  int resize(bps_event_t *event);

  Thank you for your attention,

  Hello

  In main.c include helloworld.h, .c

  .c files are compiled independently.

  the .h files first implemented in .c files report.

  So when referencing functions implemented in other .c files, include .h file to before--declare variables and functions.

  It will work in this case, but generally it is better to guard multiple of inclusion in the .h file using the preprocessor commands:

  HelloWorld.h

  #ifndef HELLOWORLD_H
  #define HELLOWORLD_H
  
  int resize(bps_event_t *event);
  
  #endif // HELLOWORLD_H
  

• Satellite S50D-to-10F - application of Ethernet connection

  Hello

  I have problems connecting to the internet using a wired connection.
  I don't get a connection when connected to my laptop computer directly into the modem via an Ethernet cable.

  I installed a new driver Atheros (version 2.1.0.21) found via the download page for the driver on the Toshiba site, but appears not to have had any effect.

  I use Windows 8.1 and have double checked that it is not the cable or modem that is causing the problem.

  Any help is greatly appreciated.

  Thanks for the comments.

• Satellite A500-025 - high and loud fan with some vibrations

  MY new Toshiba has its fan cooling at the top with a vibration when I turn on the computer first.
  After about a minute the fan speed goes down as does the noise and vibration of the fan.

  Y at - it a bios upgrade or adjustment on the A500-025 to prevent this?
  It almost looks like when you first turn it on, the fan setting is high then then adjusts.

  Thank you.

  > Y at - it a bios upgrade or adjustment on the A500-025 to prevent this?
  > It seems that when you first turn it on, the fan setting is high then then adjusts.

  This happens in my portable fans too and as much as I know there is nothing unusual
  This does not happen always, but each time when the laptop fell very long and if the temperature is higher

  I think that fans run faster for a few seconds to release the dirt among the cooling modules and calibrate the speed once again
  I wouldn't be worried is this fan behaviour maintained only for a few seconds

  Welcome them

• Satellite A-L50-19N and 4K using an HDMI output cable

  This model of toshiba has the nvidia gf gt740m. Can I connect the laptop to a 4 k-resolution TV to play 4 videos k from my computer? I read that the specification of nvidia, this card can play 4 k.

  Is the port hdmi or something else bothers me to play videos 4 k?

  > I read the specification of nvidia, this card can play 4 k
  4K is the abbreviation of 4 000 wide by 2 000 lines (4000 x 2000)
  Ultra HD means resolution of 3840 x 2160

  The GeForce GT 740 M GPU specification can be found here:
  http://www.GeForce.com/hardware/notebook-GPUs/GeForce-gt-740m/specifications

  + Up to 3840 x 2160 LCD eDP 1.2 support +.
  + Support of LCD LVDS up to 1920 x 1200 +.
  + Up to 2048 x 1536/VGA analog display Support.
  + Support + of up to 3840 x 2160 DisplayPort Multimode

  > Fact hdmi port or something else bothers me to play videos 4 k?

  It seems that the GPU would support the UHD resolution and this standard is supported at least since HDMI 1.4 standard.

  The 4 p's real of 50/60 K (Ultra HDTV) will rely on the HDMI 2.0 standard.

• External Usb Audio Card Popping and cracking sound with Satellite L500

  Greetings,

  My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

  The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

  The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

  M-Audio Fast Track Pro

  BEHRINGER uca 222

  and a simple 3d audio usb audio card external and the problem persists.

  At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

  After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

  What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

  I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

  They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

  I couldn't accept this awnser for several reasons:

  (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

  (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

  (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

  (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

  What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

  What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

  If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

  I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

  P.S

  I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

  Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

  Post edited by: sido1

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Satellite L555-10R: Question about using an external monitor with 1920 x 1200

  Hello

  I have this toshiba laptop: L555-10R

  I want to buy a screen external 24 "to use for CAD

  Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I really want the 1200 vertical height of the external display for CAD work such as size of the screen vertically made a big difference.

  If not, is there anything I can do about it to update the graphics card from the laptop?

  If not, can you suggest a new laptop that would support this? I am looking for excellent performance for rendering using 3DS Max, autocad, sketchup, etc.

  Thanks in advance
  Christopher

  > Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I think that this should not be a big problem
  The graphics chip is expected to provide support for 1920 x 1200.
  The question is whether the graphics card driver contains such special resolution of 1920 x 1200

  However, you can certainly choose two different resolutions for the screen internal and external monitor.

• How to get an external drive officially used with a Mac to be recognized and usable with a PC running Windows 7

  I have an Iomega 500 GB external hard drive that I bought about 2 years ago I used exclusively with an iMac, until this computer crashed irreparably affordable last month.  My new computer is a HP Pavilion PC running Windows 7 and when I connect the drive I see in devices and printers that he acknowledged that an Iomega hard drive is connected to a USB port, but in the computer, it shows internal hard drive of the computer and the DVD player with their respective letter designations.  However, the external hard drive is not displayed.

  Fast disk information: I buy the player on the Apple store online in early ' 08, and when I unpacked it initially, I saw no written information not specifying that it was somehow a Mac version of this Iomega drive, there was anything about it either by declaring that use it with a Mac it format to use Mac only.   When I first plugged into the Mac, I was never invited on implementation shape or anything else specific to the Mac, actually, I was never even asked about the pilots.   To plug into it, he behaved as the USB flash drive and external 40 GB drive I have - a small orange icon appears on the desktop, with the name of the drive and the USB symbol.   So for two years, I moved the files between the player and the Mac with no problems, until now, when I try to use the drive with my current PC.

  So far it was suggested to me that makes the Mac * fact * format the drive in a way that makes Mac only, and I can't reformat because I have given, I must first of all get moved to the new computer.  Another theory is that since entering at Apple, even though it is an Iomega product, it might have been shipped with a tweak specific to Mac-maybe it was already formatted for Mac use.  A third theory advanced for me, is that it could be that the cable company somehow makes the PC is not quite completely recognize it.

  Any info would be greatly apprecitated.   Worse, I can find someone with a Mac and we can move files from the Iomega to the Mac hard drive, then the 40 GB drive which * fact * work with both types of BONE, and that several times until everything is moved safely to the new computer, then can do what I do with the Iomega is usable with the PC.

  What I find a bit confusing, it's the 40 GB has never had problems of compatibility with any computer with which I have connected.  In the course of graphic design, I've been in we have Mac and PC in the same building and that player never cared that it was connected to.

  There is a format uses Apple (don't remember what it's called...? Trip...? Journal... something like that) that Windows cannot yet see.  So once you have the files and folders saved on something like the DVD, do not format NTFS for Windows can see it.  The good thing is that Apple may also see NTFS, once it is formatted and files/folders copied on it, you will be able to use all the PC under Windows or OS.

• I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

  I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function.

  I have a photo library on an external hard drive. I've slowly been import previews of the photos selected from the library in my catalog, adding them during the import process - well. But now, I hit a problem. Another folder in my library contains several subfolders, each containing a number of photos (a mixture of RAW steals (naves) and jpg). I was importing found in my catalog each Subfile in turn, using the Add function, usually of the jpgs only from each Subfile. It works fine, until I reached a particular Subfile. For some reason when I try to import from it and select the secondary file as a Source, only the RAW (NEF) images appear in the preview pane (sorry, forgot the correct term for it!). I know that jpg files are in this auxiliary file on the external hard drive, because when I view its content in Windows, they are all there. But try as I can (choose the file under source, select the folder parent as a source, try to copy or move them, instead of adding them), nothing seems to work. Since they do not appear in the preview pane, I can't import them. It does appear that this a Subfile where the problem exists, but I don't see anything that is different from the others (names of files under all use the same structure - yyyy-mm-dd_custom name, and pictures in all subfolders are adopting the same denomination structure too - yyyy-mm-dd_sequential number_custom name.) NAVE/JPG. So what I am doing wrong? Any ideas please.

  It is possible that the images in this particular subfolder were taken in your camera in RAW + JPEG.  If so, you will need to go to preferences under the general tab and make sure the box "processing JPEG files files next to raw as separate photos" is checked.

  

  However, assuming that this is the case, there is really no reason to import the JPEG file if you already have the RAW file.

• Satellite U300-113 and external monitor use

  I have, what I thought until very recently, a very simple need: I would like to connect an external monitor on my laptop, but on the continuation of the investigation things seem much more complicated about resolutions natives and elongation.
  Is there anyone who could recommend an acceptable quality monitor that is proven to work?

  I think that you should check the resolutions supported for external monitors and I think you can find answer in user manual s on page 119. To have a perfect image on external screen, you should buy external display with a native resolution listed in the table of user s manuals.

  Also talk to your local dealer. Perhaps you can test the functionality in the store before buy you.