Satellite U400 (PSU44A 00H00C) - supported the external display resolutions?

Similar Questions

• Satellite U400-10 was supports the HDD Protection probe

  All of the documentation I've read on Satellite U400-10 model has (PSU40E-00K006DU) indicates that it has a HARD drive protection sensor installed.

  I can't find this sensor listed anywhere in the Device Manager, and when I install the Toshiba HDD Protection utility it tells me that there is no sensor.

  Someone has this model with the sensor HARD drive Protection?
  If so, how say you?

  Kind regards

  Hello

  As far as I know the Toshiba HDD Protection Utility V2.0.2.3 (for Vista) was pre-installed on the U400 series, so in my opinion, the sensor is available.

• Satellite M500 - closing LID off the external display

  I just bought a new M500 today. I use a TV 46 '' as external display. When I close the lid of the external screen turns off and the laptop into hibernation.
  How can I stop this I use the external screen 95% of the time?

  Thanks in advance.

  Hello

  It's just an option, you have to change the Windows power management. Go to power options, and then select the power profile you use. Change the map and scroll until the power buttons and lid-online lid close action. Change this option to do nothing. With apply then OK you save this settings.

  Now you can try it again. I must say for me that it worked because I also work with the external monitor. :)

  Welcome them

• V5 - it will support the external display 4 k?

  Hello

  I have Aspire V5 - 591G - 72K 9 (it has GeForce GTX 950 M). It will support an external monitor with Ultra HD (3840 x 2160) resolution?

  Concerning

  Hello

  Based on the specification of your CPU, (because you also have integrated graphics), it will support in resolution 4 k. But I don't know if at 60 Hz or only 30 or 24? Of course HDMI no VGA

  http://Ark.Intel.com/products/88967/Intel-Core-I7-6700HQ-processor-6M-cache-up-to-3_50-GHz

• Satellite M50-130: no display after the passage of the external display in main monitor

  I have a very strange problem.
  My brother was on his user space as soon as possible and I managed to get the secondary monitor for main monitor and disable the screen of the laptop back, however, when it comes to me, it won't happen...

  Well, any help would be appreiciated.

  Hello

  Could you please be clearer? Is it possible to see something on the external monitor?
  Do you see something? What happens if you use the function FN + F5 device display?

  I put t know how you managed to set the external display as main screen because on my laptop, this option is grayed out.
  However, you should see the laptop if you will start Notepad in safe mode. Please check!

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• HP Envy 15t: the resolution on the external display support

  I want to put my HP Envy 15t to drive an external, not as an extension monitor, but rather as my first monitor.  My external monitor is a Viewsonic VX2250, a bit older and I use an HDMI adapter / VGA.  (The Viewsonic also has DVI inputs... not sure it would make a difference.)  On my current tour, I use the monitor in its recommended (or native mode) 1920 x 1080 definition.  I love this screen.

  The adapter is a Bytecc HM-VGA005 and specs seem to indicate that it can handle a variety of video resolutions - Full HD (1080 p), WUXGA (1920 x 1200 mode RB) and UXGA (1600 x 1200-mode VESA).

  15 t is currently shooting in the recommended 1366 x 768 resolution.  If I understand the straight plug, in HD mode it is 1366 x 768 and FHD mode is 1920 x 1080.   The graphics card is an Intel Graphics HD 4600.  Is this the reason why I can't get a HD resolution and not FHD resolution on the laptop?

  But whenever I plug all this together and try and change the settings for screen for laptop, the external screen resolution is only 1024 x 768... pretty ugly.  I have it so that the laptop screen is dark and only the external monitor is on.  But it doesn't seem to be any choice I can do to improve this resolution.  I checked that the graphics driver is up to date and it is.

  What should I do to get the best screen I can on the external monitor?  Would like to buy a new monitor HDMI inputs get better results?  Do I need a different adapter?

  Thank you... Kurt

  Me again!  Well, it was a bit the nut behind the wheel.  I checked with the store that I've been buying my cables, adapters, etc.  He said to the Viewsonic monitor to see what might happen.  As I was put in place, he asked on the power adapter.  I got the USB cable but do not think it was necessary.  But after putting everything together in addition to feeding the HDMI adapter / VGA, I could see, I was getting the resolution I hoped.  Why it worked on the monitor Dell, no idea... maybe a better monitor or other VGA cable.  The Bytecc adpater didn't come with instructions, so I didn't.

  All right.  Hope this helps someone in the future.

  Kurt

• Satellite U400-PSU44E - problem with XP drivers

  Hello
  I have the Satellite U400-PSU44E. It was the Vista Home Premium pre-installed spirit, but I had to install XP Pro.
  Under XP I have problem with installing the drivers. If I try to install driver sound I get info that the media is not found, even with the modem driver. I tried to install the electricity utility of Eve - in the last step of the installation, I get an error, and this error ia´m getting always ia´m try to uninstall this version adding utility / Removo programs.
  HARD drive protection utility I also install the Cana´t - I Dona´t don't know if this feature is supported in my Toshiba, but if this pilot is being Satellite U400 PSU44E I think it should be.
  ChipSet drivers and BIOS I installed as the first.
  I downloaded only the drivers from the web site of Toshiba (ce.computers.toshiba...) for win XP.

  Any suggestions?
  Please, please, help me!

  PS: is there some suggested order of installing the drivers for this model?

  Post edited by: helpfinder

  null

  Hello

  I n t have U400 cannot say much about it, but if you want to have good facilities order here it is:

  1 Windows XP Service Pack2 (RTM)
  2 Service Pack2 (RTM) VALUEADD folder
  3 SUPPORT Service Pack2 (RTM) folder
  Microsoft Internet Explorer V6.0 (SP2) 4
  DirectX V9.0c 5 (SP2)
  Windows Media Player 10 V10.00.00.4036 6
  7 Windows Movie Maker V2.1.4026.0
  Module 8 SLP OEMSLP2.0 (523759)
  9 Microsoft .NET Framework V1.1.4322 (SR1) V1.1
  10 Microsoft .NET Framework V2.0 V2.0.50727.42
  11 Sun Java 2 Runtime Environment V1.6.0_03
  Module of Chipset Intel (r) 12 V8.3.0.1014
  13 Intel iMSM Driver V7.8.0.1012
  14 Intel Crestline-GM / UMA Driver V6.14.10.4096
  or
  14 AMD M82XT /M86 Driver 8.452.2 - 080130 a-059240C
  15 Conexant CX20561 Audio Driver V3.47.1.0
  16 Marvell 8040/8055 LAN Driver V10.51.3.3
  17 Synaptics Touch Pad Driver V10.1.7.0
  18 Alps Touch Pad Driver V6.0.305.11.1
  19 V7.70.00.00 Conexant Modem driver
  20 modem region Select utility V2.2.3.2 (RST223MAC02)
  21 Golan/Kedron Intel Wireless LAN Driver V11.5.0.32 for XP with cat
  22 Intel Proset utility for XP V11.5.0.0.3
  23 Atheros Wireless LAN Driver V7.4.2.75
  24 Atheros Client Utility V7.0.1.70
  25 Realtek RTL8187B Wireless LAN Driver V5.1116.1226.2007
  Camera Chicony 26 V6.2.238.1217 software
  Bluetooth Stack for Windows by Toshiba V6.10.02T 27
  28 TOSHIBA SD Memory utilities V1.8.1.1
  29 Authentec AES1610 Fingerprint Utility
  Toshiba TrueAcess Manager Suite V7.9.0.4 (20080229)
  V2.00.01.00
  30 TOSHIBA ConfigFree V5.90.08
  31 TOSHIBA help V1.03.00 upd4
  32 TOSHIBA Speech System V1.00.2514
  33 CD/DVD Drive Acoustic Silencer V1.00.008
  34 Toshiba HDD Protection V2.0.2.3
  PC Diagnostic TOSHIBA 35 tool v3.2.6:
  36 TOSHIBA Touch ED V3.0.1.0
  TOSHIBA Hotkey Utility V3.0.1.0 37
  V3.0.1.0 utility TOSHIBA 38
  39 TOSHIBA Control Utility V3.0.1.0
  40 Toshiba Power Saver V7.04.02.Q
  41 Toshiba zooming Utility (smooth view) V2.0.0.24c

  Install all the necessary stuff following this order of installations.

  Please send comments.
  Good luck!

• Tecra A9-14 X - unable to use the native resolution on the external display

  Hello!

  I have some problems with my new monitor (resolution: 1920 x 1080)

  I use a Toshiba Tecra A9-14 X.

  I found this problem on the Suppor Intel home page: http://www.intel.com/support/graphics/sb/cs-028366.htm

  They have fixed this problem, but this isn't availlabe an update on Thosiba Support site...

  Ist it there another Solution?

  welcome them

  Chris

  Hello

  You can consult the page of the Toshiba driver for the latest updates.
  If there is not another version of the driver, then you must use the driver from the Intel page.

  I have a U400 and I plugged the external format 16:9 widescreen monitor too.
  I m using Intel page drivers and it works without problems.

• What is it's ok to keep Satellite U500 closed while using the external monitor?

  Hello

  I have a Satellite U500.
  At home, I use a monitor and a keyboard. So I closed the laptop while working at home.

  I can do this, or would it damage the display or otherwise hinder ventilation properly somehow laptop?

  Thank you very much for your answers.
  Thierry

  Hi mate

  Of course, you can close the lid when the laptop is connected to the external display.
  I have a Satellite phone as well and it s connected to the external monitor.
  I also have a USB keyboard.

  I use the external keyboard instead of the internal keyboard for laptop and the cover is too firm

  Don t worried if he of ok!

• HARD drive protector does not not on Satellite U400 PSU44E Win Vista Ultimate

  Hello

  I have a Toshiba Satellite U400 PSU44E

  I have install Windows Vista Ultimate Edition, with a clean install.

  I have download the good drivers for protector of HDD on Windows Vista, but an error message appears saying that the program is not compatible with this model.

  Anyone with the same problem has this problem?

  Thank you

  Hello

  I visited the European Toshiba driver page and didn t find the Vista drivers for the U400 PSU44E series.
  Are you sure that you downloaded the good HDD Protection Utility to 100%?

  At the other hand that this error message may appears because the HDD Protection Utility is not fully compatible with the ultimate edition of Vista
  I read in some messages that this might be the reason also.

• Portege Z30 - A - 18 M - cannot set the native resolution on the external display

  Hello

  I tried to connect two different displays full HD to my Portege Z30 - A - 18 M and I was unable to set the native resolution - maximum resolution I can put for those is 1680 x 1050... I was not so surprised by the first that I had a few problems with a native resolution when I connect to the laptop computer Satellite I had before. But then the same thing happened when I tried the other view.

  I thought that this notebook can handle a higher resolution external... Is there a way to force the native resolution of the external display in Windows 7?
  Thank you!

  Just a question: have you plugged your Portege with HDMI cable and use only the HDMI option?
  With other words went from the desktop to the external display only computer?

  I don't have this machine, but I think you should be able to see the desktop on an external device to the HD full 1920 x 1080 resolution.

• Tecra S2 cannot switch to the external display

  With my Tecra S2 and when it is docked in the Port Replicator APR - III, I used to be able to connect my external (via DVI) display so that it was to automatically screen output to we by default, not only to the windows startup screen (Yes, I noticed the topic on the forum at the start of windows) but also when display login screen and beyond.

  Only problem now is that there is no more than anything, she now only sends the output to the external display when starting and then switches back to the computer screen displaying the screen Windows login and when you are connected to Windows.
  Also after commissioning and connection, FN + F5 does not at all, even when you switch to DVI, display does not illuminate.

  I feel that either the nVidia properties settings (double screen, unique, etc.) or the Mobile Extension Manager have something to do with it.
  Anyone who knows the answer / solution to this problem?
  Experts on the Mobile Extension Manager or several monitor in nVidia settings with of Toshiba Tecra?

  Thank you

  Arjen

  Hello

  Well, as I know it is not possible to set the external monitor as a default monitor.
  I use a Satellite phone and sometimes I plug it into the external monitor and use the extended desktop option.
  During notebook startup procedure the windows boot image will appear on the second screen, but the user name and the operating system appears on the screen of the laptop.
  I think you can use the external monitor but you can't set it as a default monitor and you can use it if the operating system has been released.

• Re: Satellite U400 - failed to start the system recovery

  I have a Satellite U400-PSU44E and Windows Vista Home Premium 32-bit preinstalled and having some problems with my computer, had decided to use the hidden partition on the hard drive to fix the system.
  I chose 'Repair your computer' (or something similar to this), but having done, a message tells me that,

  "The installed program cannot start. Click OK to turn off the computer. »

  I don't know why that is. Can anyone help? It would be greatly appreciated.

  The Partition Recovery seems to be defective. You can order the replacement of Toshiba recovery disks. Which country are you?

  Another possibility could be that the HARD drive has failed. in this case, you will need to send the system to an ASP for repair.

• Satellite A300 - XP SP3: how to set external display, resolution 1280 x 960

  Hello world

  I installed the latest display driver for Mobility Radeon HD 3650, but I can't understand how to set the Resolution for my external monitor at 1280 x 960 (85 Hz) - the original driver of non - Mobility Radeon ATI does not have this option.

  In addition, my A300 does not remember the setting of brightness with FN + F6 / F7.
  After windows restarts, it is once again the most.

  Any ideas / suggestions?

  Thanks in advance,

  Manulu

  Hello

  The availability of the external screen resolution depends on the installed graphics driver and the graphics card itself. If the two parties n t support this external display (1280 x 960) resolution, then you will not be able to choose!
  See the user manual for this if the GPU provides support for this resolution of the external display (1280 x 960).

  Regarding the brightness setting:
  If the laptop is connected to the adapter, the brightness of the display will return to the optimum brightness. But you can manage these display settings in power management.
  There, you can create a profile for certain situations, for example when the laptop works with the energy of the battery only
  In this power profile, you can assign different levels of display brightness.