Satellite Z830 - screen cracked after 4 months

Similar Questions

• Satellite L750D - screen dark after the mode 'sleep'

  Hi, bought my Satellite L750D this morning and played around him.

  Have noticed when I put "sleep" and then wake it up in back, the screen remains dim, almost to the point where you can't see a thing. I end up having to restart, then its fine. Doesn't do it when I select hibernate, all standby mode.

  Any ideas?

  Just a question: when the laptop wake up sleeping mode positions can you use FN + F7 key combination to change the brightness of the top-level view?

• Satellite A200 - screen crashes after loading Windows 7

  Intro - programmer by trade, material not my thing.
  I have a PSAF0A Sat A200-04Y019 with 1 GB mem. Intel Cpu T2080 1.73 GHz
  Toshiba MK8037GSX ATA hard drive
  Chipset Mobile Intel 945 Express display adapter family

  Has been running Windows Vista ok.

  I've upgraded to Windows 7 Professional the screen would freeze or have multi color lines on it. Only way out was to turn it off. Tried to do the window updates and update driver without success, it does not solve the problem. I decided to reformat the disk (partition Toshiba always leaving here) and install XP. Had problems to find the drivers and then had problems trying to load them.

  Tried the option "press the button / stop and press 0 (zero)" to try to restore factory default, but it did not work. It shows the Toshiba screen and then something flashes in the lower left corner of the screen and then boots into windows
  So, after careful consideration (and a few beers) I decided it was better to go forward as backward and reinstalled Windows 7. Still have the same problem, but I noticed if I boot in safe mode or safe mode command, the laptop is fine.

  I went to the Toshiba page support download and the have not not all drivers for Windows 7. So I downloaded the vista drivers, but I get an error when I try to install, operationg wrong version for this configuration.

  I can try fix my problem? (Besides that throw the laptop at the door and see how many times it will bounce) :)

  Brian

  Hey Buddy,

  > Was Windows Vista ok.
  Sounds like this one are a pilot or if preinstalled software problem Vista runs correctly.

  In addition, I think that your laptop isn't Windows 7 supported if you can t get drivers here. You can try the Vista drivers, but if they don't work, to look for the drivers yourself. Maybe another model uses the same material but with Windows 7 supports.

  In my opinion the best choice using Vista if everything is working properly there.

• screen cracked after 1 hour

  then today I received the z3 and the phone was cracked on nowher no drops or the impact. now the screen is so more respondingt o my fingers is there a chance someone can tell me what to do or to know the exact price for a repair. THX xxxxxxxx

  Sorry to hear that, you will need to contact your local care Xperia

  http://www.sonymobile.com/global-en/support/contact-us/

• My images are covered by a fine screen; This after 6 months of use CS6 successfully. What is bad people?

  My images have started opening hidden by a screen microperforated today. I use Photoshop CS6 almost daily and have never seen it before. Everything looks OK in Bridge, but not in Photoshop. I spent ages looking for a solution, including my tutorial book. There just something simple, I know.

  Dave D

  Hello

  You probably have enabled grid.

  View > view > grid

  It could also be the grid of pixels if your zoomed in your document.

  View > display > pixel grid

  
  

  
  

  

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• Satellite A210 - turs screen off after the Windows startup screen

  When I start my windows there is the splash screen. After that, my screen goes off and cannot log on to windows.
  Satellite A210
  ATI Mobility Radeon HD2600

  Where can I get some old drivers for the ATI Mobility Radeon HD2600, that I can install without starting windows?

  > Where can I get some old drivers for the ATI Mobility Radeon HD2600, I can install without starting windows?

  Please don t get me wrong, but I think you're on the wrong track.
  (Graphics card, LAN, etc.) device drivers must be installed in the currently running system (i.e: Windows OS, etc.)

  I m sure; pilot isn t the problem if nothing is visible on the screen.

  First of all, I would recommend you to connect the laptop to an external monitor/screen just to see if something would be visible on the screen 2.

  But just a question: have you tried to start Notepad using a boot disk (windows installation disc, the disc recovery Toshiba or similar?).
  Maybe the Windows system is confusing upward and therefore, you are not able to start the system? In my opinion, you should test this option.

• Satellite A300 - after several months, it became noisy

  Hi all!

  I have a problem with my Satellite A300. The cooling fan is not functioning effectively. The fan runs almost constantly, even if the PC in standby, when I do nothing on computer.
  I cleaned the fan holes and ventilate the air, so it is very clean. I checked the cooling modules in the Toshiba Power Saver, as well as in the ATI PowerPlay.
  All settings are OK...

  The question is, why my Toshiba works fine, when I just bought it, but after several months, it has become a noisy machine? It was very very portable and fan worked perfectly...

  Thanks a lot for your help!

  Hello!

  In your case I would use compressed air jet on the underside and on the left side of the laptop to make sure that blow you the dust from the cooling fans.

  After cleaning your laptop, you should look into the Vista power management. Here you can change the cooling method and choose another option, for example optimized battery.

  Maximum cooling performance method means that your CPU can run on the highest speed and so it needs more cooling.

  Good bye

• Satellite U400-22n and Win7 - screen freezes after 5 min

  Hi, this is my first post

  I ve bought a new U400 with preinstalled Vista last week. 2 days ago I ve upgraded to windows 7 32 bit professional when I looked at install windows prompted me that it requires a full install, so I did install a normal full, windows 7 installed normally.

  Now my screen freezes after 5 min and windows go black s and restarts after 3-5 min, I ve downloaded all the drivers from the Toshiba site I ve used the auto detect and installed the drivers one by one and tested if restarting stop s, I reinstalled windows now 4 - 5 times returned my copy to the store and got a new copy of windows DVD , it s the same.

  A Please someone any advice for me. Like the store I ve this perch will not upgrade to windows 7 for me.

  Hi mate

  The U400-22n seems to belong to the series of PSU44E.
  There is a special BIOS for Win 7 32 bit 4.80 - WIN32.

  Please update it all first!

  In addition, the unit supports the Chipset Mobile Intel GL40 Express and graphics card.
  The latest graphics card driver can be downloaded from the Intel page

  To do this and test it

• Satellite A110 PSABOE: after 9 months of use of overheating

  I have an A110 PSABOE who was very quiet during the first 9 months of use. It is now extremely noisy due to the fans, but also extremely hot.
  The problem is getting worse and my laptop cuts now after an hour or two due to overheating. Everyone knows this?

  Does anyone have a suggestion as to what might help?
  Thank you very much.

  Hi Lindsey

  Maybe someone could be scared to see this issue for the first time, but to be honest it s not unusual after 9 months of use of the laptop.

  Fans may not turn with a maximum yield due to dust and debris inside the laptop.
  Usually the cooling modules will have to be cleaned from time to time to avoid these overheating problems.

  So now you ask how to clean the fans? ;)
  Well, you could buy and professional tool like a jet of compressed air and may attempt to blow through the fans.
  Generally, it should help.
  If this isn't the case, I recommend strongly to contact and laptop technician who could help you clean the cooling professionally modules.

  Bye and good luck

• Satellite L665D - No POST after LCD cable Strip

  I have a Satellite L655d S5550 and a few months ago, it has no video after a break caused by the process of closing LCD I've ever done.

  After her, I try:
  a power draining
  turn to the memory of RAM slot
  Turn on with just a memory
  Odd and band and reaset hdd cables
  Clear CMOS

  None of this works, the computer displays leds and its hard drive, cooler works normally but still no video.
  I forgot for a couple of months so I try to fuel once and 2 times it displays video normally, but after the third time without problem the video returns.

  After it, I opened the laptop and with it under tension, I did strip the cable of the LCD of the motherboard, then the system closed immediately.

  So, since it does not supply the computer power with or without baterry.
  The power led flashes and don't fill POST heatsinhk does not work.

  Any idea? I fear it's a motherboard burned, because I am of the Brazil and there is no replacement for it.

  I think that there is a hardware problem but from my point of few Interior/LCD display isn t the troublemaker.

  The point is that even if the internal screen would be defective, the laptop must turn on correctly and in an external monitor, it should be possible to use the laptop.

  For me, it seems that the motherboard or card mother as GPU (graphics processing unit) could be faulty.
  This malfunction is a worse because the replacement of the motherboard is a very expensive procedure and I think that it s not worth to fix it in case the warranty isn't valid more.

• No external boot on Satellite Z830-10J - SOLUTION

  After changing the options in the BIOS, I'm on this forum and found a solution, which does not work for me.

  The book u refuses everything I tried booting. USB and DVD - key in each port, BIOS everything that can be changed.

  Finally, I forgot the USB-2, 5 - HD to make a connection before resetting and: Yes, it works. Acronis initialized drives, so I can join, once the Satellite is committed to start the external device.

  The other thread was closed, although my solution is not mentioned. That's why I created this one.

  I U940 satellite without optical disk driver and construction of my laptop is quite similar to your Satellite Z830.
  I had my machine with pre-installed Win8. After the creation of recovery media (USB), I used my original external USB ODD to install my own Win7 64 bit version using the installation disc of Microsoft.
  Charge after driver SATA I ve installed Windows successfully. External USB ODD has been properly recognized and everything worked OK.

  The only thing I've changed was secure boot option in the BIOS.

  In any case, thank you for your ad.

• Partitions on Satellite Z830 SSD

  Hello
  Just got a new Toshiba Satellite Z830 13 "." Great machine so far! small hard drive well!

  I was wondering if, after you create the bootable recovery media, I can the SSD drive distribution in order to get more space.
  I have this computer with a SSD 128 GB wit 4 go on it:

  1: recovery partition
  2: partition of Hyberanation
  3. primary partion:
  4. first partition, primary partition:

  What happens if I delete Hibernation partition and the small primary partition? then I should win more space free expansion the main one...
  Has anyone tried it?

  Thank you
  -Marco

  Hello

  In General, after the creation of recovery disks, you can do with HARD drive and partitions that you want. You can even delete the recovery partition to get more free space.

  After doing this, you will not be able to use the installation of HARD drive recovery. With other words, you will not be able to install original Toshiba Recovery HARD drive image. Recovery DVD created using you can do it whenever you want.

• Satellite Pro U200 starts after some time it stops after 5 minutes

  Satellite Pro U200 stops after 5 minutes, then starts after some time. When she stops the
  blue screen say - stop: (0x0000008e, 0xaa846f58, 0xa9f29808, 0x00000000)

  Sysaudio.sys - address aa846f58 base at aa843000, datestamp 41107f1a

  Hello

  Believe me; It's not easy to say exactly why the BSOD appears.
  It usually happens because of a malfunction or severe software hardware fault.
  Have you used the operating system of the image of Toshiba?
  Message it says something about sysaudio.sys.
  This file is a system audio WDM filter processes and it s a part of the Windows operating system. It controls the material such as the printer or the graphics card at a lower level.

  Note: The virus uses these files as a camouflage. You should always use an anti virus application.

  In addition, you suggested that the laptop stops after 5 min.
  Well, this looks like an overheating problem. How did you use the laptop? You know that free space around the laptop is very important due to the circulation of air. Fans should also be free.

  I you use Notepad in the right position and it happen, so I recommend asking for help Toshiba service partner. They should check the laptop.

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator