Stuck in the print queue - printer will not clear

Similar Questions

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• the printer will not print-message ("script error line 2032-resi//ieframe.dill/preview.js)__

  I installed a dell 720 photo printer to my new laptop Acer. It does not print. script line 2032-resi//ieframe.dill/preview.js error message comes up. the printer will not print but shows that its installation - HELP

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=WLH&catid=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=PRN_INKJET_720&hidos=WW1&hidlang=en&TabIndex=

  Reinstall it using the right Vista 32-bit, if you have Vista 32 bit OS, since the link above of Dell printer drivers.

  See you soon. Mick Murphy - Microsoft partner

• HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

  Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

  Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

  Hello @azvlr,

  Welcome to the Forums of HP Support!

  I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

  Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

  The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

• SE error message: there is a carriage jam and the printer will not printusing HP PSC 2355xi printer all in one

  Original title: transport jam

  Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

  It is a hardware problem, not a Windows problem. You should contact HP for assistance.  This may mean that the engine or the running gear is toast. They should be able to tell you which components to check.

  writing in the new message: * e-mail address is removed from the privacy... *

  Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

• Want 5540: Blue light blinks and the printer will not connect wireless

  Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

  Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

• The printer will not allow the default printer

  Adobe will not print file, said printer must be installed
  .  OfficeJet 6500 removed and reinstalled.  When installing the message says "cannot set as default printer".  Fix Microsoft, he says that he cannot solve the problem. Help, please.    Problem is recent.

  Hi Jerry93306,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to print using applications such as WordPad or Notepad Windows?

  4. what Microsoft fixit tool you have installed on the computer?

  See the link below and try the steps mentioned, if you get the error message when you print from Adobe applications.

  Error "you must install a printer.

  http://kb2.Adobe.com/CPS/409/kb409119.html

• My setup of the printer will not work and Fire fox shows only blank pages. Help?

  I tried to change the margins on my printer set up. Since I did my printer will only print blank pages of Firefox. (If I open a PDF file it prints well) I tried to go back into all of the printing, but it is only as a large black page. Any thoughts?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

• New router now the printer will not work wireless

  The printer is a HP1102W. Operating system is windows 7. At & t installed a new router is a netgear 7550. I tried several times to get the printer to work wireless but just cannot make it work. Not very food to computers so I could really use some help.

  Thank you

  Hello

  Please follow the instructions below to fix:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• DeskJet 712C: ink cartridge is stuck in the right side and will not go

  I have an old DeskJet 712C printer which was working fine until today. Strangely, the ink cartridge is stuck in the right side of the printer and will not spend. As soon as I turn on the printer, the red light starts flashing. Does anyone know tricks to get the cartridge to move again? Thank you for your help.

  Hello

  It may be possible to move the cart if you turn the printer off. Unplug the printer and open the cover of the printer.  See if you can move the carriage by hand.  If possible, move the carriage to the Center.  Check that nothing of blocking the abnormal movements of transport - for example the pieces of paper.

  Close the cover and then plug the printer back. I hope this will help.

  I found a YouTube video that shows fixing carriage jam on printers C4200 (I know that they are not the same as the 712 C), but some of the suggestions will be useful if my initial thought above does not help.  the video is on this link:

  http://www.YouTube.com/watch?v=l9x6ZLIYMog

  Once again these tips are not specifically for your printer, but they can help solve your problem.

  I hope that was helpful.

• Hello, the printer will not print attached e. RTF file extension.

  HP Deskjet printer 3070.  Windows 7 operating system.  Error message: insufficient and printed data with error.

  I tried e-print for the first time. When I go to the configuration of web e-printer that I am asked to give a username and a password, I did however the system does not recognize and disconnects me.

  If anyone can help. Thank you

  Hello

  RTF files are not supported by the ePrint service.

  Below you can find the basics of service and restrictions, you can find a support file type listed under

  Frequently asked questions (FAQ) > Can what size and type of files I print using ePrint

  http://support.HP.com/us-en/document/c03721293

  Kind regards

  Shlomi

• I can't get rid of a page on my yahoo mail, it had to be a mailing list to send to my group, and it is stuck on the yahoo mail and will not delete

  I was trying to copy a group of emails from my yahoo account, as I was trying to make the page shrunk to the left and now, the page is not develop or delete, I have tried everything I know to remove it, but it does not move.

  Please include screenshots if possible.
  We will be able to help you.

• Stuck on the web page.  Will not be closed, even after rebooting.  How to do this?

  Went to a web page, in what I thought was the correct user name and PW.  Would not accept it.  Tried a couple of times and then click Cancel.  Don't cancel.  Finally stopped MAC, waited a few minutes and restarted.  When again I opened Safari, web site and PW always ask here.  Can't get out of it.  What can I do?

   in the menu bar and choose "force quit."

  Select Safari and click "exit of strength at the bottom of the window to Force Quit.

  Hold down the SHIFT key and launch Safari.

• HP officejet pro 8600: printer will not be used with the document in the queue

  Hi people,

  can someone help me please?

  I tried all the solutions proposed-

  Check connectivity

  restarted print queue

  Remove and then reconnect the printer

  Power reset

  Cancel job again.

  I had this problem before, but something so tinkering with the queue got fine but nothing works all the time.

  I just changed the cartridges...

  No matter what other dieas welcome please

  Ashoka

  Ash,

  I could be wrong, of course; Mac is not liable for the same way as the Windows environment.

  The printer can print when the print queue of the printer is on, ready to accept a job.  If the queue of work, i.e. the service on the printer running print jobs does not print to the printer, the printer will not print the work.

  If the printer on the computer service is not to blame, then you might indeed want to accuse the printer to not receive the work.

  You can check the communication between the printer and the rest of the installation between the printer and the service that sends the work to the printer:

  You could try to put everything back once more - to include your router.

  I hope this helps.

  Maybe someone with a Mac experience can shed light on the issue.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!