Scan and fax windows windows home 7

Similar Questions

• After the transition from XP to Windows 7, I lost my ability to scan and fax.

  When I go to the interface of the software (on my desktop), instead of being able to set up a scan and save it to a document, I now get a message that my installation of the software is incomplete.  He tells me that I have to connect via USB to complete it, but when I do this it seems to return to the original XP drivers, and I've since upgraded to Windows 7 drivers.  How to get out of this endless loop and recover my ability to scan?  And I already tried using HP diagnostic tools AND tried to remove and reinstall the update downloaded drivers.  Nothing seems to update this software interface on my desktop - the farthest, I get with it is a runtime error.  Any ideas?

  I tried to reinstall again and somehow got beyond the Runtime error (no idea how).  Now, scan and fax are back (yay) but the scan will make only a single page and then it shows a mistake and said it should be stopped.  However, I can deal with that at thispoint.     Thank you!!

• How to get the scanning and fax utilities works from 2840 printer. Print function works from pc

  I changed my google chrome browser and I finally got my confiquered pc and printer. He is an all-in-one 2840 color laser jet. How do I get the scan and fax utilities to perform?

  It is useful to include the manufacturer and model number.

  What version of Windows you have, including the service pack?

  How the device is connected to your computer (USB, Ethernet, other)?

  Have you installed the software that came with your HP Color LaserJet 2840 AiO printer?

  If not, why?  If you did, what error messages you are seeing?  Please report messages completely, without paraphrasing.

  Start here: HP Color LaserJet 2820 and 2840 AiO products Series - first installation and install

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• Complete the features of my printer office pro jet L7780 does not (scan and fax)

  I can not scan and cannot fax.  I have no hp Solution Center to my office jet pro L7780 printer. When I tried to reinstall the software for windows 7-bit, I got an error message stating MSI > MSI_BPD_Scan.  I followed the instructions how to solved the problem by selecting run, and then type MSIexec / register but the file is not found in my system.

  Hi sschocker,

  Have you followed the steps in washing I provided?

  Follow the steps below to check the WIA Service:
  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
  
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem

• Photosmart Premium c309a series - will print but scanning and fax are not in printers and Fax preferences

  Any expert out there?

  I already posted this problem.  I deleted Photosmart Premium C309a [OEFC74} of the preference of the "Print and Fax" system on my desktop Mac running OS 10.6.8.]  I deleted it to correct a mistake, "Printer offline", when the printer was offline but would not.

  I then added in Photosmart Premium C309a as instructed.  He has fixed the "printer offline" problem, but now the scanner icon disappeared from "Print & Fax" and I cannot scan documents.  I've always had to scan from my computer, not the printer itself, but I've lost this ability.

  Before deleting the printer in the printer list, I had two icons of the printer: Photosmart C309a series [OEFC74} and Photosmart C309a [192.168.1.5.]] (Fax) listed.  Now, I have one with a different designation, simply Photosmart C309a series.  I had to spend two laptops to this designation of printer in order to print using these laptops (all Macs).

  The all-in-one printer is connected wireless via a home network using a wireless router.

  HOW to bring back the ability to scan?  I spent hours on this forum without finding a solution.

  Thanks for any help.

  Radio of your printer may have indeed failed, and it is not uncommon with this model.

  Try to reset it to put off the printer, then hold him down # and 6 keys while and for a few seconds after I turn it back on.  If the radio is just when, this should fix it.  If she suffered a hardware failure (such as a circuit board) cracked, this will not fix it.

  With this model, you can also connect it to your router with an Ethernet cable and have the same functionality available for all devices, including those who have connections to your router wireless.

• My printer icon disappeared from the printer and fax under xp home page

  The printer is ready but the icon is not available on the printer and Fax page.

  The coil of the printer is not available.

  Hello

  For you help I would be grateful if you could answer the following questions:

  (1) what is the serial number and model of the printer?

  (2) was there any software or hardware changes made on the computer before this problem?

  This problem occurs because the print spooler service is damaged.

  I suggest you follow the steps from the link below and check if it helps;

  You experience problems printing, the printer icons display and adding printers, the print spooler service does not work correctly and you receive error messages related to printing on a Windows XP computer.

  http://support.Microsoft.com/kb/919750

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• OfficeJet 6500 e710n-z: scan and Fax no longer works

  Hello

  After working fine for a couple of years, scanner and fax on my Officejet 6500 functions do not work.  The print function is fine.

  Change that recent computer-wise is that I am switched to a Macbook Air (and upgraded to OS Mavericks) Macbook Pro, but all that was on my previous Mac was transferred to my Air of my LaCie support.

  When I try to scan a document, the preview function works fine but when I click on Scan, a small message says "Made scan of selected areas" but no scan is actually performed.

  When I try to send a fax, I can hear the tone on my phone line and the phone rings but the fax does not pick up.  I tried with several known fax numbers and it's always the same.  I almost never receive faxes so I can't say whether or not the receiver function works.

  Can someone advise?

  Thank you very much!

  Hi Super Dave,

  I was able to scan with the Apple Preview (even if Apple Image Capture did not work) so thank you so much for this!

  Any suggestion as to the fax?

  Thanks again!

• Vertical lines in messages scanning and fax on HP 6500 a

  Hello

  I have an Officejet 6500 has everything in one.

  In recent weeks, when I scan a document, the only result I get is in black mode (black vertical lines all over the page).

  If I use the scanning color mode I get all the lines of color on the page.

  Is it a material, problem with the lamp of scanning or something else?

  The machine is around the age of 5 months.

  Someone at - it an idea?

  The same for faxes, the same lines will appear.

  This is the main reason why I guess it's a hardware problem.

  Any comments would be useful...

  Thank you very much

  This could be a hardware problem and maybe also a problem of glass dirty scan.

  * First of all, I would like to try to reset the printer:

  (1) unplug the unit while it is turned

  (2) unplug the other end of the power cord from the wall jack directly

  (3) separate the power cord from the power brick in the middle of the string

  (4) wait a minute

  (5) unit rear cap for a direct decision-making power, not a surge protector.

  If the lines continue, then try the steps in the document for lines/stripes in scans/copy/Fax.  Click here and select the blank copy for troubleshooting option, in this case.  Let me know how it goes.

• OfficeJet 6500 on Snow Leopard, scanning and fax questions

  I finally got my wireless 6500 printer to print with Snow Leopard, but I can't scan or fax.  I contacted Applecare about this and they could not solve the problem.  These functions have been works fine under Leopard, but disappeared with Snow Leopard.  I read on an Apple forum that these functions will not work with Snow Leopard.  Is there a solution?  HP will address this issue in the near future?  All the world is facing this problem?  Help would be appreciated.  Thank you.

  Bill

  Hello BillWilb,

  Printing and scanning for the Officejet 6500 functions are fully supported in Snow Leopard.   You want to use the software that is included in 10.6, please do not use the old Leopard software.

  This document will give you simple instructions on how to scan and print from Snow Leopard.

  http://support.HP.com/us-en/document/c01846935

  I hope this doc gets going again.

  (Although I am an employee of HP, I speak for myself and not for the HP)

• OfficeJet J4660 all-in-One on Windows Server 2003 R2 - cannot use the scan and fax functionality

  Hello everyone,

  I recently purchased the Officejet J4660 AIO.  I had to install on our Windows Server 2003 R2 (with all latest updates), being present on the CD of driver for Win XP, I had to download the latest driver (OJJ4600_Corporate_ENU_10 - 55.8 MB) from the HP site.  During installation, ONLY the printer driver has been installed.  I can't use the SCAN function or the FAX software.  In fact, the icons for these two programs not created in the HP program group.  No error message appeared well while installing.

  All the world was a program similar and been able to get a work around for this?  I would like to use AIO printer that I bought, not only on the side of impression of it.

  Any help will be much appreciated.

  Thank you.

  Salim

  I think that the Acquisition of Image Windows (WIA) service is disabled in your system. Unlike Windows XP or Vista, in most Windows Server systems, this service is disabled by default. You can activate it in this way:

  1. right click on my computer and select manage.

  2. Select "Applications and Services-> Services";

  3. find Windows Image Acquisition (WIA), right click and select Properties.

  4. Select "auto" in the "Startup Type" list box in the "Général" tab

  5. in the situation 'Services', click 'start '.

• the computer must be on and the windows scan and fax program open to receive a fax?

  I would like to receive faxes at any time - the computer must I be on and windows & scan fax needs to be run to receive a fax?

  I looked through many pages of documentation and the forums and didn't find any reference to this.

  Thanks, Gil

  He probably could if your fax/modem may wake the computer from sleep mode. But you would still have to wonder if the fax send would wait long enough for the PC to detect the ring, wake up and be ready to deal with a fax.

• I created just scan and fax from windows. When I try to fax it always says line busy. I can receive faxes, but not to send them.

  When I send a fax, it connects then rang several times and then says line busy. I can hear the ring tone on the line, and this isn't a busy signal. I tried a few different numbers and I get the same thing. Can anyone help?

  http://Windows.Microsoft.com/en-us/Windows-Vista/send-a-fax

  Send a fax

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes

  Configure your computer to send and receive faxes

  Read the info above from Microsoft.

  In addition, read the info on the links to these sites.

  See you soon.

  Mick Murphy - Microsoft partner

• my printer works but my scanner is not scanning and fax for windows cannot locate my scanner

  I have recently upgraded to windows 10.  now my scanner is not recognized when I try to scan.  I am able to print correctly.  I am connected to a Canon MF 5770 multi function machine

  Hello

  How about you contact Canon? they know which software is better provided

  You have installed the latest drivers Windows 10 below?

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf5770#DriversAndSoftware

  I suggest you give it a try if you're having trouble Cannon would be the place to check with, not HP.

  Regars,

  Shlomi

• why I can't find scan and fax

  I have version liscenesed of MS Vista, but Windows Fax and Scan is not installed is not a download or option of component snap.  Why?

  Hello

  http://www.Microsoft.com/Windows/Windows-Vista/features/fax-scan.aspx

  It depends on your version of Vista as to if you have installed fax software.

  the home versions have no fax software.

  ____________________________________________________________________________

  For the 3rd party Fax software:

  http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more