Scan from Mac OS to HP PSC1510 10.9

Similar Questions

• HP photosmart C5550 scan from Mac OS x 10.6.8 after driver update

  I tried to get that day of your expert, but did not get a response. I am scanning images from a directory of the former for our class reunion. Photos come with a design of type rafters/checkerboard everywhere on some pages and only on some images on other pages.  Some pages contain pictures with them and little nice and clear design.  Someone suggested, it might be something to do with a filter, or the so-called Gaussian blur, but I have no idea what it is.  I tried to use the two IPhoto and the HP software and which makes no difference.  I saw one of your experts to someone else answer that they should try updating the driver, so I followed that direction, but now, the scanner will not all scan to the computer.  I tried to unplug and add the Photosmart, but that did not help. In Applications it does not even show that the Photosmart is connected but it is.  I don't know what else to try.  I tried everything that is too bad to be fixed?  It was working fine until I had this problem of scanning.

  We will uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: http://support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page and install it.

  There may be more things to do to make it work, but you must be able to scan from your Mac.

• LaserJet M277n: Cannot scan from Mac

  I just bought a LaserJet M277n and connected to my home network.

  I can print from my MacBook. I can copy the printer.

  I can't scan.

  I downloaded the HP EasyScan software, but that does not work either.

  For the Capture of Image Mac software and the EasyScan HP open programs and they will see

  the scanner but nothing else.

  If I select 'Preview' Capture of image scanner makes a noise and the light goes from one end to

  the other, but no preview is displayed. There is a dark gray area where the usuall overview showing.

  If I select "analyze" the little wheel goes round next to the name of the printer on the left, but nothing happens.

  Any help would be greatly appreciated.

  Thank you.

  Skoot

  Hi Skoot,

  The link above refers to the firmware, not for the software, these aren't the same things...

  In the configuration Menu, select reports, then the Config report.

  In the product information section, which is the listed firmware datecode?

• I can print but not scan from my mac os 10.6.8

  I have a HP all-in - one 1315 printer connected to my Mac. My Mac running OS 10.6.8. I am able to print to the printer, but I cannot scan. Any help is appreciated more.

  Hello

  I'm afraid that the specific model, as a former model, only provided woth print drivers and no longer support scanning from Mac OS X 10.5, as you can find below:

  http://support.HP.com/us-en/document/c01234231

  * Even if the specific document on Mac OS X 10.5, same thing for any newer OS.

  To work around the problem, try the scan of 3rd party Vuescan software which seems to support the PSC 1315:

  http://www.Hamrick.com/VueScan/hp_psc_1310.html

  Kind regards

  Shlomi

• Unable to scan from officejet j4680 for Mac OS10.6

  I get an "unknown error" message when I try to scan from officejet j4680 on my Mac (OS 10.6).  I can print, but not an analysis.  Are there simple troubleshooting patches?  Thanks, Gil

  Restart the Mac,

  Apple menu > software update... Install updates

  If it does not perform these steps:

  • Applications
  • Uninstalling HP * warning step below it will remove all THE HP software *.
  • Hold down CTRL and CMD and Option on your keyboard while clicking on uninstall to remove all software
  • Apple menu > System Preferences > print and fax
  • Hold down the CTRL key and click in the white box on the left side.
  • Release CTRL key, and then click Reset printing system
  • Applications > utilities > disk utility
  • Check the permissions of the drive
  • Repair disk permissions,
  • Download the latest software from HP
  • http://FTP.HP.com/pub/softlib/software10/COL30074/MP-74787-1/HP_Installer_Officejet_Full_Group04_10.3.dmg
  • Install and try to start a new search

• Scan from the printer HP for MacBook

  After the Update September 1, 2016 at the HP6500A, the scan from the printer to the computer software has become inoperative.  Printer cannot detect the MacBook Pro.  Can you help me?

  You might have better luck using the image transfer application on the pre installed in your folder scanner Applications.

  Help here > the basics of the Mac: using a scanner - Apple Support

• scanning from hpOfficejet Pro 8610 for OSX ELCapitan

  I can't scan from my Officejet Pro 8610 All-in-one scanner my computer Mac (OSX El Capitan).  It prints well ok.  Someone can help me.  Thank you.

  Hi @Ellen6,

  Thanks for joining the Forums of HP Support for a solution to your problem of scanning.

  I understand that you can print fine on your computer Mac OS X 10.11 El Capitan for a HP Officejet Pro 8610 e-all-in-one printer, but you are unable to scan. I would like to help with that.

  I would like to start by resetting printing Mac system. If you are unsure how, here is an Apple Support document that can help - reset the printing system.

  After resetting the printing system, the printer will have to be added to the printers and Scanners window. You want to make sure that you select the driver "HP OfficeJet Pro 8610 series" instead of the driver "AirPrint" in the menu in the window of printer "Add" drop-down 'use'. Here is a document that can help with this if needed - Add or remove a printer.

  Please let me know if that solves the problem, or if you need assistance.

• HP Photo Smart D5110 will not scan with Mac OS 10.9

  Help. I've looked everywhere and can't always come up with a solution to scan from my Photosmart. Worked fine until I upgraded to Maverick. Thank you!

  WelchSHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking in your scanning options. I would try to help.

  Due to the age of the printer, there is no HP software for this printer on Mavericks.  You can, however, use the characters of basic Mac OS and drivers to scan.  I'm including a document on the installation and using the printer on a Macthat should help you to solve this particular section of the document titled "How to scan with Apple software update driver?"

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• HP OfficeJet Pro 8710: Scan from the printer to laptop can leave laptop to the printer

  Hi I have problems with the new operating system for sierra on my macbook pro. I can manually scan from my computer to the printer and can print but when I try to scan from the printer, an error message on the printer, that is the counl scan could not be completed, make sure that the computer is connected to the printer and then try again. on the computer, the message is communication Scanner cannot be established make sure your device is turned on check the connection and make sure that your network is working properly if these conditions are correct restart the device and try to scan the image. I just had a llok in HP Utility under the menu fax and scan of the computer is not activated. The message asked me to go to support, but I downloaded the drivers twice and still it will not activate the scan of the computer. What am I missing to make this work.thanks for your help

  Hello

  Scan of the computer can be activated that the current software was conducted before Sierra.

  Software update should be available in the next few weeks to fully support the Sierra, for now just start analysis of your Mac.

  Kind regards

  Shlomi

• How to scan from computer?

  I'm trying to scan a document on D110 eprinter but get the following scan error message 'try scan from computer or see the documentation '. Any help?

  Hi mehaem,

  If you use that a Windows based PC, open the icon of the solution center which should have been created when you installed the software. In this application, you should have the option to scan.

  If you use a machine based MAC OS x, in the drawer of applications, in the Hewlett-Packard folder, there is an application called HP Scan. You can perform an operation analysis of this application.

  I hope this helps!

• When you try to scan, print says "configure the pc to start scan. using mac.

  When you try to scan on PIXMA MG5722 I get the message 'set the PC to start scan.  I can scan marketing PC but no printer.  With the help of iMac.  Need to scan documents on the printer using the printer scan button.  How can I fix it?

  Hello.

  According to the version of Mac OS x that is on your computer, you may need to scan using the software on your Mac.

  If you use OS 10.11, please scan from the Scan IJ utility instead.  This program are in the Canon Utilities folder in Applications.

  If you need additional help in this issue, find more help contact us.

• C4780 will not scan in mac Mavrick, worked fine before update

  I have an iMac and upgraded to Mavrick. Now my scanner, Photosmart C4780, does not scan. I have HP scan, 2.4.0(5), that has worked well before. I can't find an upgrade to scan from HP on the web site. When I use it, nothing happens and I have to use Force quit to turn it off. Suggestion? Thank you

  Hello DKF1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post on the problems you are having with a sweep on the Mavericks.  I checked the drivers available and there is no driver available for the Mavericks scanning. However, there are solutions to analyze.

  Click on the link below and choose 'How to scan with the Apple Software Update driver?' and then you will see 3 methods, choose one of them.

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  I hope this helps.

  Take care

• HP Photosmart C309A wrong size paper to print wireless from Mac OS 10.7.5

  We connected our HP Photosmart C309A AllinOne printer on a wireless network to our Mac computer running Mac OS 10.7.5. Almost whenever we try to print from any propgram he respnds with the following error message:

  Paper size error: paper selected in the printer driver does not match the paper size in the printer input tray.

  I have reset the size of the paper to the printer to letter 8.5 x 11, updated all the software of the computer and checked all the preferences.

  What should I do next?  The printer worked fine with 10.6.

  Thanks for your suggestions.  We are VERY frustrated.

  Hi amwsin,

  I suggest to reset the printing of your Mac system. Then readd the printer printing & scanning and test again to print.

  This documents contains steps to reset the printing system: Macintosh: reset the system of printing from Mac OS X

  It will be useful.

   

• All-in-One HP Envy 7645: how to scan from Windows 7 computer again HP Envy 7645 all-in-one printer/scanner

  I am trying to scan from my computer windows 7 using my new printer, as shown above.  I used to have an IP address with my old printer wireless so that all I had to do was get in line and type it in and print management, scanning and ink tabs HPs came. That's how I scanned it.  I get that now.  What Miss me?  Drivers or software?  To be installed automatically, you would think! with a new printer... does anyone have a solution? Thank you.

  Hello

  I do not know why you can not install the printer software and driver on your computer. I now have a ready 7640 Envy (identical to your craving 7645, even software and driver) in front of me. I have ben the test using 3 different routers, more than a dozen of Windows machines, phones Samsung, Samsung tablets, tablets from HP, iPhone, iPad, Windows phones. I can't test one thing: Apple Mac machines because I have not I don't have any plan to buy one.

  Installtion shouldn't take more than 10 minutes for the first computer; pop the CD just in run and please select Wireless during the installation process. For Windows 8.1 Please also using the same CD to inatall why doesn't not fit the CD I don't know. If no CD, please download the following file and run as administrator

  http://ftp.HP.com/pub/softlib/software12/COL55963/MP-134720-2/EN7640_117.exe

  Kind regards.

• Scan on mac

  Hello

  I have installed the HP Photosmart C4280 on my Mac (OS X 10.6.4)  When I try to scan, computer firstly said that the sweeping system inadvertently stop, then with subsequent trys, it always freezes.  I have two exact same printers and two of the CD for the printer and this happens when using or the other.

  Thanks for your help

  Mathiadatter

  You probably installed the software from the CD for the printer?  If so, you must remove this particular way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.