ScanDisk flash drive not recognized by windows desktop 7
My Cruzer Scandisk SDCZ36 - 032G works on my laptop but not on my desktop pc
Running windows 7, but the problem has been resolved. I have 8 usb ports and I tried them all and one finally worked. I thought it might be a problem with how the BIOS has been set, but fortunately, it was a simple fix. Thanks for the attention to my problem, well rated.
Tags: HP Desktops
Similar Questions
-
CD/DVD drive not recognized by Windows all of a sudden
The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.
Hi Ranamaska,
You can follow this link & check if the problem persists:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?
Hope the helps of information.
-
CD/DVD drive not recognized by Windows Vista
I installed a suite of burningb of CD and DVD on my Toshiba (under Vista Home Premium). My CD/DVD drive appeared more in the computer and was no longer functional. I deleted the program I installed and apparently caused the problem, but it did not help. I have read through the help of Microsoft (929461, 314060) documents and used the Fix - It utility. Also unsuccessful. I discovered the response of Martin, the technical support engineer made on May 5, 2009. I followed his instructions with great success. However, my question now is this: I have still some remains of the problem left over. I get an error message at startup saying, 'InstaBurn UDF driver is not installed correctly. Run the InstaBurn installation program. ' InstaBurn is part of the suite of the copy (hotpics by Nova Development Corp.). I also have an error message of my reader DVD Toshiba saying that the DVD player does not work - although it is. I played a DVD as a test on it after that I followed the instructions above. How can I remove these error messages annoying that aren't accurate? Would appreciate any information about this minor - but annoying problem.
Hello
Do a Restore Point then you can go back to where you are if necessary although you should not have to:
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
---------------------------------------------------------------Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================================
Go to Toshiba and download and drivers or programs that affect the CD/DVD drive - Chipset
and BIOS updates can also play a role.For any download - SAVE - go to where you put them - click on - RUN AS ADMIN
Toshiba downloads - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadThen reinstall the programs that you use for this drive.
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
The lack of CD/DVD drive - not recognized by windows or other programs
help-tried several fixes m/s and fix it but did not help. Here are a few messages I get: when in the details of the driver for my Sony DVD + RW AWQ160s - update drivers: here are 2 notches and uncked 2, one by Sonic Solutions and a Roxio time saying no digitally signed (that would be a problem)? also when I look at update or install the updated driver, after that search, I get this is the best driver for this device - I don't have this device Ouch! Without my CD drive E work of course I can't even try reinstalling drivers/utilities cd... can someone help this computer incompetent gal? I'm ready to wipe and reinstall vista I have other problems like IE does not and ms word does not always. I did go back several times, and perhaps not far enough back but had a Trojan horse and do not want to deal with it again. thx for any help
Hello
(1) would you please provide more information about the problem you are having with word and Internet Explorer?
Method 1: You may need to reinstall Roxio on your computer, please see the article below for programs that can cause this problem:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in WindowsMethod 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Bay DVD replace HARD drive not recognized by Windows
I have a 7737 with the 256 GB SSD, but I wanted more storage internally and was not too annoyed to have DVD - so I bought a caddy and replaced the optical drive with a WD Scorpio Black 750 GB drive.
When I went into administration - computer management - disk management tools, he acknowledged that the drive was there because he told me that he needed reprogramming - so I went ahead and let him. The disc quickly disappeared from the list, and I can't do anything that he can come back.
I tried to refresh, rescan the drives, restart (how can I confirm the BIOS recognizes the drive correctly, as the "SATA ODD', but Windows still refuses to acknowledge that he is here.) Device Manager displays only the SSD and scanning for hardware changes have no effect.
Maybe it's a coincidence, but now my laptop seems a touch slow, especially in the graphics... and I noticed that in the Task Manager, System interrupts now takes 10 percent of time CPU on average. I can't say that I've never noticed that before. My old Samsung laptop (which has integrated graphics rather than a dedicated card, to be honest) claims system interrupts doesn't take any time at all CPU. This seems to suggest a conflict any exist, and maybe that's why the drive is not recognized?
Because Device Manager is not see it, I can't check for updated drivers.
Because disk management can't see, I can't format / partition / assign a drive letter.
The BIOS does not let me do anything with the drive, go into properties or disable / re-enable, or something like that.
Can anyone suggest what I might have missed in the configuration, or what I can do to fix this?
Thanks in advance.
Unfortunately, I can't find a downloadable diagnosis for your laptop. Try Seatools. Seagate website has a download, that you can use to create a CD bootable or flash player to test hard drives.
I just want to see if a tool outside Windows can detect the drive and all the problems.
-
EliteOne 800 G2: EliteOne 800 G2 NIC driver not recognized with Windows Deployment Service WDS
Hello
I have just taken receipt of 5 new HP EliteOne 800 G2 23 "no touch machines. All PC's are generally imaged using Windows Deployment Services.
I downloaded sp72515.exe that is the Intel I219 NIC driver pack for Windows 7 64 bit and injected these drivers into Windows Deployment Service and updated the boot LiteTouchPE_x64.wim file. Windows reported it went slowly and the 6 drivers concerned are all showing loaded with so much success in WDS.
Problem. When I PXE boot the Windows EliteOne 800 G2 pilot of the CARD is not recognized by the 800 EliteOne G2.
Wizard error
A connection to the deployment share (\ < servername > \Deploymentshare$) could not be made. The following network device did not have a driver installed. PCI\VEN_8086 & DEV_15B7 & SUBSYS_8058103C & REV_31
Hello:
The only suggestion I can offer would be to try the driver directly from Intel...
The 2nd file listed on the left side of the page is for W7 x 64.
https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-?v=t
-
My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.
At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.
Thanks in advance for any help, Carlos
Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos
-
External CD/DVD RW drive not recognized by Windows XP
Original title: Professional. Have an advantage humbucker 16 X 8 DVD/CD RW & ATi Radeon 9550 AGP 250 M for video and VGA that is not recognized
Have a double microphone 16 X 8 DVD/CD RW advantage which is not recognized by XP Professional. Also have a CD unit and when windows installs the drivers - it gives them both the same driver. DVD RW is only recognized as a CD! Have used Microsoft fixit and he says everything is fine. -It uses the same driver for CD and DVD RW units.
Have also an ATi Radeon 9550 AGP 250 M for the video and VGA and Windows XP does not - have question marks for them in Device Manager. Microsoft fixit - did fix this problem.
Have deleted the drivers and tried to control the computer for downloads by Microsoft and it can't find them - if I do a check for hardware changes, he finds only those who do not work properly and that don't work at all, as indicated above.
Also went on the Microsoft Web site and cannot find a solution it - clicked on links with any help that I could see.
Sorry for the problem - just fusterated
LF
Hello
To work around this problem in Microsoft Windows XP, follow these steps:
Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article http://support.microsoft.com/kb/322756
Step 1: Remove the registry entries modified. To do this, follow these steps:
a. Click Start, click Run, type regedit and then click OK.
(b) in the navigation pane, search for, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
(c) in the right pane, click UpperFilters.
d. in the Edit menu, click on delete.
e. When you are prompted to confirm the deletion, click Yes.
f. in the right pane, click LowerFilters.
g. in the Edit menu, click on delete.
h. When you are prompted to confirm the deletion, click Yes.
i. exit the registry editor.
j. restart the computer.
Note: If you notice a loss of functionality in a particular program as in the CD recording software after you remove registry UpperFilters and LowerFilters values, reinstall this software. If this problem continues, contact the supplier of software to help.
Step 2: Remove the existing drivers. To do this, follow these steps:
a. Click Start and then click Control Panel.
b. If the control panel is in category view, click performance and Maintenance and then click System.
c. If the control panel is in Classic view, double-click System.
d. click the Hardware tab, and then click Device Manager.
e. expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
f. When you are prompted to confirm that you want to remove the device, click OK.
g. restart the computer.
Note: after you restart your computer. the drivers will be automatically installed.
-
I have a hitachi lifestudio external hard drive and it works great 50% of the time... the other 50%, I fight because it not being recognized on my computer or laptop (both vista). I plugged it to my computer now and it will only recognize the player but is not the one with my files that I need. I have two USB cords connected and it was working fine yesterday! Now all of a sudden it won't work at all. I got and rehooked many times now and still nothing. Other USB ports are filled with our wireless mouse and others. Is there a way to force vista to recognize something?
Hello
· Were there any changes made to your computer before this problem?
Step 1: Try running Microsoft fix it in the following article:
Reference: http://support.microsoft.com/gp/hardware_device_problems
See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices
Step 2: Check if the external drive is getting detected in disk management.
If the hard drive is recognized in disk management and if there is no letter assigned drive, I suggest you make a right click on the drive and assign a drive letter and check to see if it helps:
Reference: http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-letter
-
USB drive not recognized in windows 7 but is recognized in windows xp
I downloaded music files from my computer windows xp on a sandisk cruzer usb flash drive. I tried to download these files to my new laptop with windows 7, but the laptop has stated that it does not recognize the device. What I d0 now?
I have a 2 GB SanDisk Cruzer so I'm sure it 'll work with Windows 7. It is possible that the Sandisk has installed a software owner and Windows don't is not running. There is an updated version of the US software on SanDisk site which may help.
http://KB.SanDisk.com/app/answers/detail/A_ID/3682/SNO/0Personally, I would remove the U3 of the reader software because it is NOT necessary for training at work. I had to search the disk and launch a program to "delete" in the Launchpad folder on the drive. Once removed, it should work without interference from this program.
Here is a link to the SanDisk site as well. You should be able to easily do the XP.
http://KB.SanDisk.com/app/answers/detail/A_ID/2550/SNO/0I hope this helps Mark <> Microsoft Partner
-
USB flash drive not recognized and install
USB port works fine in my computer, I have Windows vista basic with acer laptop
but when a usb flash drive is inserted it not recognize and install
unitentified error of device and driver to the generic sound of end errorpls help
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
See you soon. Mick Murphy - Microsoft partner
-
Internal SATA II hard drive not recognized by Windows 7
I upgraded to the i7 platform today and started with a new installation of windows 7, but I also kept my old 2 disks hard disk 0 (Hitatchi 250 GB) drive (Hitatchi 500 GB) 1 2 (Seagate 1 TB drive) - the 1 TB HARD drive is a new one. However, the BIOS recognizes all drives, Windows 7 does not recognize 1 TB HARD drive... Disk management is. Any Suggestions? I want to be able to use the walk that I have information on the 500, but it is 90% full... (Pulling my hair out trying to find a way for this drive be seen by windows 7).
Intel LGA 1156 MB
4 GB RAM DDR3 1066
Intel Core i7 2.8 GHz
MSI NVIDIA 250 GTS 512 MB video.I managed to solve the problem. I had EXACTLY the same problem and was able to resolve this down to a bug in Windows 7.
I did a blog post on this subject in which I linked above. However, I will also give you the solution here:
The answer:
Start-> right click computer-> properties
Device Manager (left side)
Click on the arrow of disks to view the list
Find your reader you have installed here
Make a right click on the drive-> uninstall
After the HDD SATA disappears, click on action-> Scan for hardware changes menu -
Flash drive not recognizing USB - c
I just bought the new macbook 12 inches with the retina. I am very satisfied, but I'm having some trouble with two flash drives that I bought on Amazon. Sometimes, they recognize and sometimes they are not then I reboot
and they work fine. What is happening to someone else? How can I fix?
Others have noticed the same thing. Here are two threads, you might look at. In my eyes, there was not a single solution that works for most people with this problem. I do not recommend that you report your problem to Apple directly but I guess that they are aware.
Retina Macbook does not notice external HD
Good luck
Richard Glendon
-
HARD drive not recognized by Windows Vista Home Edition (32-bit with Service Pack 2)
Windows stopped to recognize external 500 GB drive external HARD on my Ascer Aspire 5610Z attached via the USB port. Have tried two USB ports, but won't recognize the device. Seeing of the device lights up and the device can be played on another laptop. OK worked until a week or two ago, but cannot restore because it's on this unit that the backups are done! Windows is 'unknown material' and trying to find the driver, without success. Device Manager reflects an unknown device but gives no description, etc.
Hi Peter St Clair,.
1. did you of recent changes on the computer?
2 are you able to access other USB devices on the computer?
Method 1
See the link below and run them the fixit tool available, check if it works.
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Also, check if the drive is detected and letter drive affected by the management of the disks on the computer.
Change, add, or remove a drive letter
http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter
Method 2
If the previous step fails, then I suggest you reinstall the USB controllers on the computer and check if it works.
Note: If you use a USB mouse, please follow the steps of "Using the keyboard" to reinstall the USB controllers. Windows 7 will reinstall all the controllers automatically after restarting your computer.
Use the mouse
--------------
First of all, please disconnect all USB devices and then perform the following steps:
(a) click on 'Start', type 'Device Manager' (without the quotes) in the search bar and press "Enter." If necessary, click on continue.
(b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".
(c) repeat step 2 to uninstall all items under 'USB Bus controllers'.
Then, restart your computer and Windows Vista will automatically reinstall all USB controllers.
Use the keyboard
-----------------
First of all, please disconnect all USB devices. Then go through the following steps:
(a) press "Ctrl + Esc" to open the Start Menu.
(b) Device Manager to type in the search bar and press "Enter." If necessary, click on continue.
(c) in the Device Manager, press Tab and use 'Up' and 'Down' to move the selection from 'de Bus USB controllers '.
(d) press 'Right' and expand it.
(e) press 'Down' to move to the first item, and then press "Delete" to delete.
(f) repeat step 5 and uninstall everything under 'controllers of Bus USB '.
I hope this helps!
Halima S - Microsoft technical support.
-
External SATA drive not recognized in Windows 7
I use a SATA Sabrent USB adapter to connect an old hard drive Samsung SATA with Windows XP on it to my new Windows 7 laptop. The older hard drive a lot of files on what I would like to transfer through. After I have the hard drive lights and then connect the USB adapter to the laptop, I see the message that the drivers have been installed, but no hard drive does not appear in the my computer window or in the disk management window. Indeed, these windows will usually hang after that I connected the drive. This could be a problem with the drivers not installed, or is there something else? Any help is appreciated, I really want to recover the files from my old hard drive!
Thank you
JustinHello
1. the hard drive is compatible with Windows 7?
2. do you get an error code in Device Manager?
3. What is the model of the Samsung drive?
Method 1:
I suggest you to connect the device to a different USB port and check if it helps.
Also, try to connect the device to another system running Windows 7 and check if it is fixed.
Method 2:
Follow the link below, run the fix it tool and check if the problem is resolved.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Let us know if it helps.
Maybe you are looking for
-
Portege 7020 bios upgrade problem.
I have a Portege 7020 CT with docking station. For a year and a half I can't update my bios. The problem is that when starting the floppy (as in instructions) drive my docking station is almost all (floppy drive) is turned off. Or I couldn't upgrade
-
Post-processing of the data received from series
Hello I want to process the data received by Compote in labview where the transmitter unit will send 22 bytes of data in this format 0 x 01 02 0 x 0 x 03 0x0D by the Compote which must be read using Labview. I want to treat the bytes received 22 in l
-
HP Color Laserjet Pro M477fnw: Scanning for MAC
I tried to analyze documents on my Mac for my printer without success. I am connected to the wireless printer and I am unable to print to the printer with all the problems. The scanning portion connects simply cannot. I followed the instructions i
-
Impression on RDP 32 bit 64 bit Windows 7 pro host client
Wow, I read about 400 posts on mixed 64/32 bit print DRP and either they cover the desktop remotely on Windows servers or printing on 64-bit clients. I have 2 computers to Windows 7. 1 is a 7 Pro 64-bit and the other is a 7 Home Premium 32-bit. We us
-
HP Office Jet 7000 E809a not install on Windows 8.1 HP laptop
Downloaded 8.1 driver for HP Office Jet 7000 E809a. Installation fails with "the system cannot find the specified file" C:\USERS\STANSLA~1\AppData\Local\Temp|7zS374A\Setup\hpzp...