Scanning in an all in one

Similar Questions

• Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210

  Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed.

  Moved from feedback

  Original title: scan driver

  Hello Timmy,

  Please take a look at the following link for the driver\firmware for your printer.

  KODAK ESP 5210 All-in-One Printer Firmware - WINDOWS operating systems

  If this is not enough, you may have contact with Kodak support for the same. Thank you.

• Newly purchased HP 7520 does not scan the e-all-in-one in color on mu Mac OS 10.9

  Need help, totally frustrated.

  Just installed a brand new HP 7520 e-all-in-one on my new MAC OS 10.9. The product prints and copies in color. However, all scans come out in black and white?  Who can help me, desperately in need of time. I have the printer what USB connected.

  Elske

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:
  
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.
  
  Kind regards
  Shlomi

• Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

  When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

  Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

  In addition, Windows Fax and Scan cannot scan to PDF.

  Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

  If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

• Problems scanning with c6150 all in one and Windows 8

  I have a new touchsmart from HP running Windows 8. I have an old printer c6150 all in one. I downloaded and installed the latest software and drivers for 64-bit Windows 8.

  I feel, copy and fax without problems. But when I try to scan, it freezes. It starts to scan and then just stops responding. I have to use Task Manager to quit the program. I tried the scan doctor and he says that there is a driver problem and it cannot communicate with the printer.

  Help, please.

  I solved the problem. The USB cable from the printer was not quite long enough to reach the back of my all in one computer, so I bought a USB extension cable. That works fine for normal printing, but apparently only works well for scanning.

  Once I connected the printer directly to the USB port on the computer, the scan function worked normally.

  Emilio

• LaserJet Pro M125nw MFP - scan to application all-in-One remote control does not work

  Hi gurus,

  Basically, I bought that Super-imprimante and I now trying to scan to my mobile devices.

  I have an iPad 2 iOS 7 on 2 Android devices (small tablet and phone) both running Kitkat 4.4.2

  I try to send a scan of all these devices and retrieve the output in my mobile, in fact it is quite described here and for exactly my printer model: http://support.hp.com/us-en/document/c02486319

  Unfortunately, what is happening:

  -From my iPad, the app AiO says that my printer is not compatible with the application!

  -From my 2 Android devices, the application of all-in-one remote works perfectly, except the scan function as nothing happens (well, when pressing the button 'Preview' or 'Analysis' in the Scan section, I see a button 'Cancel' for 0.1 second and I'm back to this section of the analysis)

  Could someone help please?

  

  The printer is returned to the seller.

  According to French support, the product page is fake, so I was waisting my time.

• How can I convert a text scanned a C5180 all in one for use in Word?

  I recently bought a new IMAC and spin the Mountain Lion.  When I tried to scan a document using the software that came with my C5180 all in one that I received a message that I have to use the Apple software to the place.  I followed the instructions on the HP site and succeeded to the digitization of the document.  My C5180 comes with OCR software that allowed me to convert the image into a text file.  When I scan text by using the Apple software I can create a number of different output - PDF, TIFF, PNG formats - but I can't edit in Word (or something else I think).  Does anyone know a solution to this problem before you spend $199 for Adobe Pro X?

  Thank you.

  Hello

  Capacity Unfortuinately OCR is more provided by the software solution provided for Mountain Lion.

  In addition, be aware that Adobe Pro will give you not directly from the scanning program - Adobe applications require compatible devices Twain, Mac OS drivers provided only with the support of the ICA-interface.

  You will need to use any 3rd party for this purpose OCR program, using Read Iris as an example will be more convinience because it support the ICA compatible devices.

  There might be additional OCR solutions, I don't personally know this.

  Kind regards

  Shlomi

• Can't scan via C4180 all-in-One (using Mac OS 10.6.8)

  I've finally updated for Leopard (10.5) to Snow Leopard (10.6), and now whenever I try to scan, I get the error, "Sorry, scanner could not be initialized. (Scanner not found.) »

  I was able to scan until I upgraded to, but now I can't. I can still print and copy very well and he seems not to have been updated since Snow Leopard came out. Will there be one for me to scan, or is it a different problem?

  Hello

  May you always have the HP Scan Pro application in the Hewlett-Packard folder or have you updated the software and that the analysis of HP?

  If you still see the HP Scan Pro persists it means your software is not compatible with Snow Leopard.

  Uninstall the software by following the HP uninstaller program.

  Restart your Mac, download and install the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77264-1&cc=us&DLC=en&LC=en&OS=219&product=1141647&sw_lang=

  Finally, run the software update and try scanning using HP Scan.

  For any question try scanning without using software HP as shown below and then check for the difference:

  http://support.HP.com/us-en/document/c03583750

  Shlomi

• DeskJet 2544: Button pre-scan of the all-in-one printer HP Deskjet 2544 disappeared

  Hello. The prescan on my Deskjet 2544 button disappeared, he cannot find any info about it as any place so would be grateful for any help or to be headed in the right direction. You'd be the answers are as silly as possible.

  Thank you

  Thanks for keeping me informed. Given that you still not the button scan after having tried the HP print and Scan doctor, I suggest you use the following steps to completely uninstall and reinstall the software:

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer

  5. Follow these steps to reset the registry settings and options for Windows Installer.

     • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

     • In the Open box, type msiexec /Unregister, and then click OK.

     • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

     • In the Open box, type msiexec/regserver, and then click OK

       * Note: there is a space between the c and the /.

        

       If you do not at this stage, use this link to perform another way. Restart Windows install

  6. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
  7. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
  8. Restart the computer
  9. Download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  Please go back to let me know if that fixes the problem, thanks. Fingers crossed!

• Unable to Scan officeJet 5510 All in One

  XP

  I have had this machine, no CD, downloaded the soft/driver, it was perfect

  I have IE6.0 on IE8 updted. After this, HP 5510 not worked, any program not lunch

  Uninstalled the driver HP and reinstall

  Many message error and my computer freez. I tried to do also with hungari and English language

  No good result

  ScanDoctor found a lot of error

  Uninstalled all programs, Setup a new WIN XP

  No good result.

  HP average setup freezes time, or at the end of the time, not lunch HpDirector etc etc

  Finally, I can print and copy, but I can't scan

  Here are a few pictures of errors

  http://horex.UW.Hu/kepek/hp_device_detected.jpg

  http://horex.UW.Hu/kepek/hp_error2.jpg

  http://horex.UW.Hu/kepek/hp_error3.jpg

  http://horex.UW.Hu/kepek/hp_doctor.jpg

  http://horex.UW.Hu/kepek/hp_mistake.jpg

  I'll open my window and...

  Hope I get good advice

  Solved!

  I did a full new install of WIN XP because soft HP would install to the C: drive. I didn't want it and soft HP did not offer to choose disk and installation full or reduced. Of course not because uninstall left every details earlier in the registry

  New configuration froze again at the recognation of USB device

  I didn't know why, but I thought that he has fought for another program runing

  I turned off the firewall and internet connection

  My computer is restart and automatically continue Setup without any problem on disk D:\

  What is the solution?

  p.s. I used Wise Registry Cleaner mind deep cleaning to kill all HP registry detail

• Scanning HP C7250 all-in-One

  When push button of the Menu Scan printer get the message "No analysis Options - refer to the device documentation to solve the problems." Have Windows 7 Home Premium on my Dell desktop computer. In Windows Photo Gallery, when I click on import, there is no other choice 'analysis of the camera or scanner.

  My HP printer was bought in 2009, and the Dell has bought this year.

  Ray

  raybest,

  It's a simple answer. Installation of the unit is not WIN7.

  You must download it from here:http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3382185&

  (1) select either 32 or 64-bit WIN 7 OS, then download

  (2) full feature software

  (3) all patches, updates, utilities.

  (4) burn everything on a CD

  (5) install

• Major problems in scanning with c410a all-in-one...

  In courses run a Windows 8.1 high-end desktop system with a huge amount of memory and have experienced a tremendous amount of problems printing & scanning with my c410a. I have run the maintenance on this pc daily cleaning Cache, Virus scan, all and then some, the PC is a horse race except for printing and scanning...

  This Scanner/printer works very slowly, more slowly, and then it did on my old XP system for 10 years.

  Sometimes in the middle of the analysis, it stops and freezes by me to close the centre of solutions through the Manager of task or at best its not scan more then 2 or 3 elements software b4 of the scanner hangs. I tried everything in the forums I've seen, unplug the power cord of the c410a, restart, etc... Everything that...

  I ran the "HP Print and Scan Doctor" and sometimes it seems to work, allowing me to sweep slowly a point or two b4 it crashes again. Howeverwhen running the Scan Doctor it especially crashes when it gets to the part "scan Windows wia" of its efforts. These poor printing and scanning capabilities on the PC or faster (a factor) that I've ever used is unacceptable.

  Surely you experts can troubleshoot a very frustrated guy from HP?

  Thank you all for your help, especially the HP Tech Support staff... Although I just bought a laptop $1100.00 at HP with a support package for Smartfriend Tech that I don't try to use it for this problem because this c410 is on my desk which is not an HP.  Just for the record I never got my HP HP mini work said they could fix it by phone, but wanted at least $60.00 $ to do. I never had luck with my HP stuff, but I hope that this will not be the case with my new HP laptop... I had heard that HP had better...

  The problem with my c410a seems to be resolved and I can make the dpi / send changes in 10 seconds approximately. Slow but manageable compared to the 3-30 minutes, he took earlier today.  How I solved it on my own without ANY HP

  Support Tech or HP Forum was to completely delete all HP software from my desktop system and installation of the HP Wizard and to install All THE OF BLOATWARE ITS on my system. I had previously been excluding the HP Photo creations, Bing toolbar and software HP Customer Participation however magically or predictable when I allowed all of HP's Bloatware to be installed it worked the works. With the exception of the Bing toolbar that I got an error for which says it's not compatible with IE 11, it's funny I think.

  Only, I posted this comment on the risk that it may help other people having the same problem as it may seem, with HP, you have a better chance to get help from people who are not HP or only if you pay HP to help. While I would expect HP to delete this message who knows maybe they figure this is the best message in the month.

• Do error scan from my all-in-one HP Laserjet Professional M1213nf 22.

  I get 22 scanner error when I try to copy a page using the copier function. After that, I have to restart my printer to disappear this error. I also checked the version of firmware by print config report and it says the datecode frimware is 20130211 and the version of the software is 20121108. I also used the HP Print and Scan doctor to correct the error. But nothing seems to work for me. So please help me...

  Hello

  I understand that you found a 22 scanner error.

  Perform a power reset.
  
  Press the power button to turn on the printer.
  
  With the printer, unplug the power cord at the back of the printer.
  
  Wait at least 30 seconds. Reconnect the power cord to the back of the printer.
  
  Press the power button to turn on the printer.
  
  
  
  Update the firmware on the printer. I've included the url.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lang = to & lc = in & product = 4075457 &
  
  
  
  I will send you a private message with some information to take a look at.
  
  In the forum next to your handle name simply click on the envelope to see.

  Let me know if this helps.

• How to find capabilities of scanning with C5180 all in one with Windows Vista? CC = en

  I can print with C5180.  I can't scan.  When I go to programs on my Windows Vista computer, I can see is no longer my unit indicated.  I tried to reinstall the disc that came with the device.  Install doesn't work.

  Hello RDB49 and kethyinmo

  Try the following procedure. It will remove the HP software and software that can cause problems. Please let me know if any of you have problems.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer

• Using the scan function on all-in-one printer with wireless print server

  I have an Epson CX7800 and that you have installed the Linksys Wiress G print server.  I was not able to access the scanner since the connection to the print server.    Just printer function works well from what ever printer I choose to print from, cannot use the scanner option.  Any help would be appreciated.

  Figured it out.  Didn't know you had to click on connect before analysis.