Scanning Photosmart B110a problem

Similar Questions

• Scanning Photosmart 7510 problem

  My Photosmart 7510 worked fine for six months or so I've owned it. Recently however, my laptop stopped recognizing the 7510 scanner, although the impression was very good. After having tried in vain a few things, I deleted all the driver from HP and other software and it reinstalled from the CD, but the problem persisted. I worked through the guide installation failure MSI 1603 HP, including downloading of new versions of drivers and other software, and everything has worked fine until it is returned to normal startup in msconfig and restarted the laptop, how the scanner is not found again.

  I run Windows 7 and connect with the wireless printer.

  I guess that something in the startup is interfering with the communication scanner, resulting perhaps an update from Microsoft.

  Any help would be appreciated.

  Welcome to the Forums of HP Chris170,

  I see by your post that the scan has stopped working. To turn off the startup items, it started working again.
  I can help you with this problem.

  The cause would be a program that runs in the background.

  Try with the Antivirus Scanning software off to remove the cause.

  Then you can go into the msconfig for Startup tab and just activate a few elements at a time and try to scan the image. In this way, you can leave the problem not controlled. But your time will help.

  For my part, I turn off everything but my Antivirus software in the msconfig. Speeds up the computer also.

  If you need help, let me know.

  Good day!
  Thank you.

• Scanning Photosmart C310 problem

  On my photosmart C310, I can scan from the control panel of the printer, but if I use the analysis of solution center it fails. I can't change the settings in the solution Center. I completely uninstalled and reinstalled the software with no change in results. The HP Scanning window opens in a small window and cannot be resized. He runs the scan process, and then another window opens indicating that a software error has occurred.

  It contains the extended next error message: 4, [(3,42,0)]

  I have windows 7 64-bit home installed on my PC.

  Recently, the only thing to do is uninstall/reinstalling the HP software.

  You see the behavior that is described at the opening of Scan?

  Check the DPI of the computer settings, the HP software supports 100% DPI only:

  1. Right-click on an empty area of your desktop and click on the Screen Resolution.
  2. Click on the link to make text and other more or less important .
  3. In the left pane, click set custom text (PPP) size .
  4. To the right of the scale to this percentage of normal size, click the drop-down list arrow and select 100%.
  5. Reboot your PC and try to scan from the HP software

  Please let me know of any changes,

  Shlomi

• Scanning Photosmart 7520 problems

  I just tried I scan a document to the printer. I get a message indicating it found no computer.  I can scan OK computer. Also, how I'd get an icon of the scanner showing on the bottom of my screen?

  Helen

  Helen

  I'm Home widgets. Two of them. I went to the HP installation wizard and highlights my printer connected wireless even if it is connected through the USB port. I went through the installation and at the end, click on the box for the widget. I had to do that both of my printers. Everhting now works!

  Thanks for your help.

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• Photosmart B110a: eprint problems after Windows upgrade 10

  The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

  Any notice received with gratitude.

  Hello @Ticfan,

  Welcome to the HP support forums.

  I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

  The first thing I want to address is the "ePrint + Jetadvantage".

  It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

  The following link will take you to the correct driver.

  You can select 64 or 32 bits depending on your operating system.

  HP ePrint Software

  I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.

• have photosmart b110a and after the update, it will not print or scan to my office

  have recently bought photosmart b110a and connected wireless for desktop (windows xp) and laptop (windows 7), but after an update is, it prints from the desktop - have deleted the software but left driver installed to try to remedy the situation and made the restoration of the system

  Hi there caleso,

  This is probably a software bug somewhere lets try to download and print and scan running doctor located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening.

  Good luck!

• Photosmart B110a - Wireless Setup Assistant starts whenever it is turned on

  Hi all

  I just spent half a day to set up my new printer wireless HP Photosmart B110a. (CN245B)

  He luckily easy, but ultimately all the software is installed on two computers and printer is wireless connected to the router on my home network. Printing, ePrint, scanning everything works fine.

  With the exception of this problem: I turned off the printer using the power and she handed over after 10 minutes. I've done several times, and when turned on, every time the printer wonder if I want to configure the wireless connection. If I click on Yes, then he begins the wizzard - wireless and the password must be entered again etc. If I click on no, then the printer just starts and runs very well. It seems that he does not lose the connection settings.

  Whenever I turn on the printer with the button, it is from the wireless configuration wizard. Is this a bug?

  How can it be solved?

  Thank you

  Smartyx.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP address of the router to the bridge and the first DNS entry.  Let the second white.

  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart B110A black does not print

  Hi, I have a photosmart B110A and black stopped printing.  Was working fine before this problem.

  A lot of ink but I have replace the cartridge with a new one and same problem.  A ran all alignment head cleaning tests, etc. Reinstall the cartridge.  Clean the vent on the top of the cartridge.  Powered on.  Still nothing.

  Is there a solution to this problem?

  Hi Ciara

  Thank you very much, this seems to have solved the problem.  Although I have consumed a lot of ink there are now no remains in the cartridges that I will need to replace before I can be 100%

  Thanks again

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• all-in-one photosmart B110a: windows 10 and b110a

  I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

  Hello @Jenecessary,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

  Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

  Please let me know the results, I'll watch for your reply.

  Thank you

• Photosmart B110A: Photosmart B110A - missing HP Support Assistant.msi

  Hello

  I use Windows 10 and I just installed the latest

  version of the software for Photosmart B110A

  from scratch.

  The software always tells me that it is missing

  the file Assistant.msi of taking in charge of HP.

  It says Error 1706, and something about a bad resource.

  I don't know where to find the file or how to

  solve the problem.

  Kind regards
  Martin

  Hi @mploug,

  Welcome to the HP Forums!

  I understand that you are missing the file HP Support Assistant.msi for your HP Photosmart B110A, on the operating system Windows 10. I'm happy to help you!

  Please, try the following steps:

  1. Close the window to locate the file with the message "Error 1706", if you don't have already done.

• How can I disable wireless on Photosmart B110a?

  I had a lot of intermittent problems with the Wi - Fi on my Photosmart B110a, but the USB connection is perfectly OK. I had a few printintouts on my printer from a neiighbour, those unwanted. Please tell us how to completely disable my wireless connection. Thank you, Bill.

  Windows7 64bitAcer ' aspir ' 5732Z

  There is an option to disable the card wireless in the printer.

  * Press the key for the Setup Menu on the front panel of the printer

  * Select the submenu wireless

  * Under this menu is an option to turn on/off wireless.

  I hope this helps.

• Photosmart B110a yellow ink went Brown (HP364 cartridge)

  On December 24, 2013, I replaced all three colors HP364 ink cartridges in my Photosmart B110a as they were exhausted. (The black cartridge didn't need of replacement). Today (21 January 2014) I noticed that the colors were bad printing; a race of 'print quality' showed that the reason was that the yellow cartridge, while always 75-80% full, was in fact the Golden impression. The withdrawal of the yellow cartridge, I noticed that the stamp was no longer a yellow/orange color, but was in fact a darker tan/brown color. A 364 yellow replacement cartridge and a clean print head have solved the problem, but I would like to know four things:

  1. Is this a common problem? The guy where I bought the replacement cartridge said he had heard of that happens (specifically with yellow HP cartridges and specifically 'Brown printing') front.
  2. Is he likely to damage my printer permanently? Is the oxidation or whatever it is the yellow ink that is likely to cause damage to the print head itself?
  3. If it still happens once can I claim for a warranty replacement cartridge (and if it does not damage the printer at all times can I claim repair/replacement of the printer under warranty although the printer itself, which works perfectly, is no longer under warranty?)
  4. The printer is slightly used. I can avoid this by making a color print (of anything, even a page "print quality") at regular intervals? If so, what type of interval? And if that's the case could it be documented somewhere?

  It is a 'real' HP 364 cartridge (supplied by Argos to the United Kingdom, manufactured in Czech Republic and with a warranty date in 2015), not OEM, not recycled, either said in passing.

  Hello tonyinselby,

  Welcome to the HP Forums!

  I am pleased to learn that you have been able to get the problem solved.

  1. it is very difficult to say whether this is a 'common' problem with the yellow HP364 cartridge. Without the complete troubleshooting with the cartridge, I can't tell what the more precisely caused the problem. Sometimes Yes, like all other products, some have flaws.

  2. no is not likely to cause damage to the print head, you are able to use the yellow replacement cartridge.

  3. According to the guarantee of the cartridge, and the printer warranty. It is possible to have the cartridge, printer or replaced. To do this well you will have to contact HP Support at the time of the question, because I can't guarantee what options are available to you.

  4. with printing in color at certain intervals, this can help with the print quality, as the ink is not just sitting there. Keep in mind also that your printer does its own maintenance as long as it stays on. You can also run a cleaning print head to properly maintain the printer.

  I hope that this answers your questions .

  Thank you.

• HP Photosmart B110a - poor print quality

  Hello

  I have a HP Photosmart B110a CN245B and I use Mac OS X Lion version 10.7.2.

  I bought this HP Photosmart camera in the month of August, I changed the black cartridge once and it worked well. But now, replacing the black cartridge for the second time, I had a few problems. Printing is faded, I can barely read what is written on the page, even if I chose 'Grayscale - black print cartridge only' and 'Best quality'... the print quality is very bad. What can I do?

  Thank you very much!

  I think that the printhead has failed.  It should be under warranty.  Here's how to contact HP technical support: www.hp.com/go/totalcare