Screen and battery

Similar Questions

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• Toshiba Libretto L5 / 80 - driver screen and battery problem

  Hello

  I have reinstall my Toshiba Libretto L5 / 80, unfortunately one have no CD with driver and after instalation, the system cannot detect display driver (I can see only 800 x 600 resolution, not a 1280 x 600 is a driver ATI Mobility Radeon-M but clasics ati site cannot be installed) and pilot battery (I can't see the battery info do not know a type of a battery). I can't find the drivers on the toshiba site, please, if anyone knows where can I download it, or better, if someone send me driver on mail ([email protected]), I will be very happy. THX for any answer.

  Petr

  Hello

  I thought that most of the Toshiba laptop models are known to me, but now I'm completely confused when I saw the picture of this beauty. ;)
  Where you bought this laptop?

  As you can see this laptop model is not listed on the support page of Toshiba Europe. Is it perhaps an Asian model? Maybe in the United States?

• My taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, a completely frozen. Pleeez HEEELP!

  Hey there, at 7.52 pm (3 hours), my taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, completely frozen.

  The cursor does absolutely nothing when you click on it. Heeeeelp Pleeeez!
  Thank you, Nat

  Given that this problem is only a few hours ago, please do a system restore.

  Choose a date where you did NOT have this problem as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  You can give alco, this method a try...
  Restore explorer.exe

  Press CTRL + Alt + Delete... Task Manager... Processes tab... Right-click on explorer.exe... click on end process... Applications tab... New task... in the Open box, type explorer.exe ... OK when finished.

• I broke my screen, and now cannot drag to open it.  I have an alarm that don't go.  I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  I broke my screen, and now cannot drag to open it.  I have an alarm that don't go. I can let the battery die I know but I really want to be able to access and examine what are the texts I received today. I think that my ICloud is can be disabled. I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  Without entering your access code, it is not possible, unless your time is in iCloud. If this is the case, connect to iCloud.com to check your calendar.

  Good luck.

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• Satellite Pro A60, keeps returning to start towards the top of the screen and wont start

  My A60 PC refuses to boot.

  It was working fine when a blue screen came with random lines streaming to the bottom of the screen, the style of the matrix, and then he stopped. When I try to turn it on, turns on the screen "in touch with tomorrow", but the images and the text are... kind of distorted pixelated, and I know it's not a flaw with the monitor.
  A second or two later, the screen comes up asking me if I want to start... ' Safe mode ' "Safe Mode with network" 'know last Configuration... '. "etc. No matter which option to choose, the screen just white out for a few seconds, then returns to the distorted "in touch with tomorrow" screen and everything starts all over again.

  I tried to remove the battery, to no avail... I thought that always worked with electronics!
  I have all the important files saved on a USB key, so solutions that involve losing the data very well.
  Thank you!

  Hello

  How do you know that it is not defect with monitor? Have you tried testing with external monitor?

  Anyway, if you can't boot your laptop select Safe mode the best solution for me is to make the clean OS install. Your important files are backed up and you don't have to be worried about losing important information.

• General hardware problems NB200-125 (screen and HD)

  Hi all

  NB200-125 my wife is around the age of 18 months and in the last few weeks will expose some strange problems. He started with a boot failier where unable to start windows XP, after trying to boot into normal mode and safe mode, a few times I tried to plug it to make sure it wasn't a battery problem, plug it helped and I managed to get it started and ran chkdisk who found a bunch of disk errors hard that it sets, and it is now ok start a few files have been lost, but it might just be chkdisk removal from areas of the HD.

  Now in the past 2 days we got 2 times where the screen is spent "in white" first to a black screen, then the second time for a green screen.

  Someone at - it for directions to know where to look to fix it? I thought that it would be the sort to change the HD until these errors to the screen.

  Any ideas would be very appreciated.

  Hi Grunge,

  Of course, these problems can be hardware related but before I ask an authorized service provider you should try a recovery facility to the factory settings. Maybe Windows was confused to the top because of the previous problems so a reinstall would be useful.

  In order to take the way to recovery, and boot from it. Follow the instructions on the screen and restore the box settings.

  If still doesn't help really hardware related issue and it can be fixed to an authorized service provider.

• Lock screen and mouse L850 satellite every 2 seconds

  I think I have a hardware problem with the Satellite PSKDLA - 0C800R L850.

  It is a laptop I bougth to my wife but he has ended up with my stepson of Uni studies. While he had it the hard drive is not one of his friends replaced. twelve months later, he advised it was gone blackscreen and G'nort would turn out.

  I finally got hold of it again and managed to drain the power remaining and replaced the CMOS battery remove a strip of RAM and it starts fine. I've proved a faulty stick so that left aside. Then I realized that there was a problem with the screen and the mouse

  . The screen would brighten up (wash out) then Flash and stabilize. First thought was video chip or the driver.
  At the same time would lock the mouse. When the screen clears the mouse would again.
  Happening every three or four seconds but now every two seconds. It is more difficult to do something.

  Have reloaded many drivers, but I think it is material, but not sure if it needs a motherboard or processor.
  Can you advise?

  I forgot to mention that the image of the screen is slightly down from senior management.
  Tere is a few millimeters of black with a white line on the top edge of the image.
  This white line seems to come on and off with the locked mouse synchronization and the screen. This is another indication of the problem or the backlight?

  Hi, have you checked the thermal paste between the CPU and the heatsink?
  CPU fan blows hot air outdoors?

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• Satellite L300 has only a black screen and will not load.

  Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
  See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.

  Can someone help

  Thank you
  Tony.

  Hello

  You mean that you are not able to access the BIOS?
  Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor?  :|

  If nothing will not help to remove the battery and disconnect the portable AC.
  Wait for about 1 hour then reconnect both sides and try to turn on the laptop.

• Satellite A210 - 11 p - gos black screen and HARD drive does not

  Hello

  My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

  I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
  The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

  Not too sure what to do and any advice would be welcome.

  Hey Buddy,

  > I reloaded Windows 7 but still no joy.
  Have you ever tried with Toshiba Recovery disk operating system?

  The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

  That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

• Satellite A50: Need the detailed specifications of the screen and DVD - RW

  Hello

  One of my friends had their murdered A50.
  It suffered a blow hard with blunt when closed, which broke the screen and totally destroyed the hard drive.

  This is probably beyond economic repair. However, I had a go at laptops before repair (mainly the Apple iBook - these have tiny parts and are quite difficult to maintain - the Toshiba looks easy).

  I have two questions-

  First, I removed the HARD drive and hooked it to an external monitor. The wireless appears to work, the charges of the battery and the system boots to the BIOS. I took the hard drive and it is writing off the coast, the data has been saved.

  However, I can't get the DVD player to eject. I opened it with a paper clip, and it opens and closes fine manually. There don't seem to be getting no power anyway. Is this normal? It does not seem to have taken no external damage, it is easy to take the coverage of the case and take a look at the connectors.

  Second, the screen is broken (just the glass, the rest of the top of the page looks very well). Anyone know what is the model of screen used in the A50? In addition, a source for this bit second hand would be great - pointers? (if this is allowed in the forum?)

  See you soon,.
  Josh

  [Edited by: admin on 21 January 06 11:04]

  Hello

  In my opinion the best way to order parts is to contact Toshiba service partner because it has detailed information on compatible parts. In addition, sometimes laptops come with different screens and if you want to be 100% sure what part is supported so ask the ASP.
  However I found this site with a screen for an A50:
  http://www.screentekinc.com/Toshiba__Satellite__A50--14.1_lcd_screen--(1024_x_768) _XGA.html

  Well well about by car: in my opinion, the drive is broken and it should also be replaced.

  Good bye

• Clock and battery indicator went

  Hey, I've finally updated to OS X El Capitan last night. Everything goes a lot overall, I love the new features and the whole system runs a lot faster. The only problem I have is that since I've updated the clock and battery indicator are no longer visible in the status bar at the top of my screen. Does anyone else have a similar issue or know how to recover? I'm running it on my early 2013 13 "Macbook Pro retina. Thank you

  Note aside, is there a way to display images here? This is my first post so I am new on how it all works and I want to post a screenshot of what appears on the status bar.

  You went in the preferences-> Energy Saver system and provided for the option to display the status of the battery is turned on?

  Have you went into the preferences system-> Date time & -> clock and ensured that the option to display the date & time in the menu bar is turned on?

• 23 - d160qd envy: new motherboard, now empty screen and 6 beeps. Cannot change the legacy BIOS. Help!

  Good ladies and Gentlemenof the Interwebulars, I hope someone can shed some light on my situation.

  Walked down one day to see that my computer would not start. A diagnosis which in a bad power port. Got a new motherboard because after desoldering (or that's what I tried to do) I realized that it was small to (re) welding in and I could not find the right part to reorganize.

  so I got a new motherboard. The number replacement part direct. Barefoot on my floor wood and ESD wrsitband on, I put in this bad boy. Double and triple check things and connections. Go to hit the power button and I get 6 beeps and 6 flashes of correspopnding of the powerbutton. The system does not appear to be on, fan is running with the other sounds of starting and running sounds, but I have a white screen and orange electric button. If I tap CTRL + ALT + DELETE it will restart and begin the process again. The 6 beeps by HP standards denotes missing graphics / card error. My original motherboard had a built-in graphics card so I thought that the same new part number card mother too. Obviously not. so I had a Geforce 2Go MXM graphics card update with heat sink. Barefoot, wood floor, bracelet ESD, thermal paste and turn it on to hear... SIX BEEPS AND SCREEN WHITE.

  After Googling around, some people say that I have to enter the BIOS and change boot legacy and fashion out of the UEFI mode that's killing me right now. I have join and would completely if I could see my screen of the BIOS, or anything for that matter. I can not go back also to my other card because it will not feed. So my question; How to make or change the BIOS settings so that my computer will recognize a graphics card or internal graphic that should be on the new motherboard itself so that it starts?

  I need this computer for CAD work soon so I thought help processor i7, 8GBs RAM, Geforce card and touch screen to perform a generation of PC.  So if someone has a great idea they would projected upward on this post, I'd appreciate it. Thank you!

  Your computer is not posting, sound rather give an error message in the form of 6 beeps and red LED flashing, indicating graphics / video issue.

  You can never get into the BIOS of the device, if its not posting, not on a HP Desktop atleast.

  I recommend, you disconnect all components and fittings connected to the motherboard i.e. cables SATA, power cables, RAM, processor, heatsink, power supply and battery CMOS as well.

  Now, press and hold button power unit for a minute or two., with the power and everything is still disconnected.

  Then,.

  (1) Insert the battery CMOS back into its slot, install the processor and the heat sink, connect all cables power that goes to the motherbaord in the PSU and CPU and etc., less SATA cable and cable power to drive hard and Optcal drive and turn on the device, of course after you have connected the rear power cable.

  (2) check if the machine beeps and check whether it is 5 times.

  (3) If yes install a memory in the first slot (slot black), connect the monitor and turn on the power and check if there is no video output.

  (4) if so, connect the return which is always disconncted, to their respective locations and ports and turn them the unit on and get on with your CAD stuff.

  IF NO,

  2 options:

  (1) if the unit is still under warranty, call 1800-474-6836 and have a technician on-site visit your place and replace the parts needed for the operational unit.

  (2) or the motherboard you purchased could have been Dead On Arrival. Get a warranty replacement for the DOA mobo and re install a new Board of Directors.

  Good luck!

  Please click on the "congratulations, Thumbs Up" at the bottom of this post if you want to say 'Thank you' for helping!
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.