Screen black & white TV

Similar Questions

• Apple black white screen nothing else

  I have an iPad that was recharged during the night and the result is a black screen with white appl flashes slowly. I can't reset, restore, erase or do anything to solve the problem. I connected to iTunes, nothing helps.

  Any thoughts on how I can get past this?

  Try recovery mode as described in this support article: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• Satellite M70 - screen flickers and goes black, white or other

  I have a portable Satellite M70 and lately the screen becomes either black, white and a few other colors (no ghost image).

  The laptop seems good but I can t see anything so the only solution is to turn on and off. He didn't used to do this.
  I have updated the BIOS and the driver of the screen but always comes back.

  Any suggestions?

  Have you tried an external monitor on the laptop?
  It would be important to make sure if it s a display or the motherboard problem.
  Check it!

  Have what driver you installed for the laptop? You must use the driver from the Web from Toshiba site.

  Good luck!

• HP Jet 7: Black screen with white lines on the HP 7 stream

  I bought my HP 7 stream about 2 years ago and I'm now a black screen with white lines whenever I turn on the tablet.

  Can you kindly help.

  If that's what you see immediately when you turn on, the graphics have not to the Board of Directors.

  These tablets were dropped after the first year of release, and it would not be worth the cost if it could be repaired.

  I'm sorry.

• YouTube does not play videos in google chrome, I see only black white screen with nothing happening.

  * Original title: youtube

  Hello

  YouTube is not playing videos in google chrome, I see only black white screen with nothing happens

  YouTube works fine under IE

  WATS the problem please say n give solution

  This problem has something to do with Dell Data Vault?

  because after I turn on my machine, I get this message... Service Dell Data Vault has stopped working

  details on dell Vault problem... reference data below

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DellDataVault.exe
  Application version: 3.9.3.0
  Application timestamp: 54cc0788
  Fault Module name: DellDataVault.exe
  Fault Module Version: 3.9.3.0
  Timestamp of Module error: 54cc0788
  Exception code: c0000005
  Exception offset: 00017126
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 16393
  Additional information 1: a539
  More information 2: 18736dd72b4a3074605a116ef5884f1f
  3 more information: c832
  Additional information 4: 3c436c3937586374ee122b3cd7b3def9

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  PLEASE HELP SOON

  Given that this problem affects Google Chrome, I ask in the forums of Google Chrome: Google Chrome help Forum

• Cannot install the Bootmanager from vista DVD patch (black screen cursor white)

  Hello

  I started getting an error of e/s on my computer toshiba laptop l305d-s5928

  I went to my local computer store and got an installation disc, so I could repair the bootmanager.  (I watched the error message about this).

  I inserted the disk and booted from it.  It loads the files, displays the microsoft name and logo with the scroll bar, and then I get a black screen with white cursor. I can't understand what it is.  or what to do.

  Any ideas?

  EDIT: ntfsfix on Knoppix was not able to fix it.

  Hello

  Thanks for the post. Unfortunately, the question you have posted is not clear. Clarify these issues so that we can better understand the issue.

  a. Why have you tried to repair the Boot manager?

  b. What is the error that you have tried to solve the problems?

  c. the disc that you used is a disk drive or repair facility?

  d. were performing a clean installation or a repair (Custom) install?

  Provide more information so that we can better help you.

• After you install Amd catalyst 13.12, laptop screen is white black screen switching

  Original title: catalyst for windows 8 portable 13.12 amd had deleted my screen

  while I was installing amd catalyst 13.12 suddenly my computer screen dell laptop is purple and black patch, nothing can be seen in the my computer screen, nothing is displayed, alt + ctrl + del also does not work, so I restarted the computer dell laptop symbol appeared then the windows loading 8 points appears then the screen next to the switch to white screen black and purple. I repeated it restart my pc so many times but the problem is the same

  Hi Abhishek,

  This problem may occur because of problems with the display card driver.

  What is the model of the Dell laptop?

  Please disconnect all external devices other than the keyboard and mouse.

  Since you are not able to go to the login screen or able to boot to the desktop, the only option we can try is to run the system restore by using the installation of Windows 8 media. To create an installation of Windows 8 (USB) media. Check out the following link.

  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  When you create the installation media, do the system restore. System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state. Refer to the steps:

  1. Insert the Windows 8 (DVD/USB) installation media, and then restart the computer.
  2. Hit F12 key (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.
  3. Once the Windows Setup window appears, follow these steps:
  4. Then drag and select repair your computer.
  5. You will then see a blue screen and an option to choose.
  6. Choose the Troubleshooting option and select Advanced options.
  7. Select restore and follow the prompt on the screen.

  For your reference: System Restore

  Please follow the section restore your PC to an earlier point in time

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Warning the system restore: Application /programmes. that were installed after the last restore point will be lost. You may have to reinstall programs and applications.

  Please answer us on the State of the question to help you further.

• black screen (on the iPad device) and the white screen of white (on the iPhone device)

  What is the problem?

  I publish the app (Air SDK version 20.0.0.233, compiled in Flash CC) in Itunes Connect and I get the message:

  ---------------------------------------------------

  We discovered one or more bugs in your application when reviewed on iPad and iPhone iOS 9.2.1 running on networks cellular and Wi - Fi.

  More precisely, we were still not able to use the app, a black screen is empty (on iPad device) and white screen of white (on iPhone device) appear indefinitely after the launch of the app.

  Next steps

  Please run your application on a device to identify the issues, and then to review and submit your control application.

  If we misunderstood the intended behavior of your application, please reply to this message in the resolution Center to provide information on how these features have been designed to work.

  For new apps, uninstall all previous versions of your application from a device, then install and follow the steps to reproduce the problem. For updates, install the new version as an update to the previous version, then follow the steps to reproduce the problem (s).

  Resources

  If you have difficulties to reproduce a problem report, please try to test the workflow described in Technical Q & A QA1764: how to reproduce the bugs found compared to observations of the App Store .

  If you have any questions at the level of the code after using the resources above, you can check with Apple Developer technical support . When the DTS engineer follows upward with you, be prepared to provide:

  -all the details of your rejection problem (s)

  -screenshots

  -steps to reproduce the problem (s)

  - symbolicated crash logs -If the result of your question in a crash log

  -------------------------------------------

  Compiling on Mac OS to solve the problem

• Satellite C50D-A - screen black and white - but HDMI works

  Hello

  I'm gone for a week and when I came back would not work my screen...
  It's just a blank screen of white. If I use the HDMI cable it works very well through television but not the laptop screen.

  I didn't leave it turned on or plugged in while I was away so I'm not sure what would have happened. I can leaving it slightly ajar, but surely, they are designed for it?

  In any case, advice appreciated... It will cost me money or is it a simple solution.

  Thank you all

  laptop works when I connect to an external monitor

  In this case the inside display panel malfunctions and must be replaced.

• Satellite: A30 - 404: gives TV-out black / white

  I have a SA30-404. I installed PAL. I checked the cables with one laptop from another manufacturer (!) and the TV still gives black / white. I have installed Intels Extreme Graphics 2. This doesnot even improve things. So, what I can do. Which driver thosiba form helps me.

  Hello

  the A30 has a S-video out.

  If your TV has only video then you will get only a black and white screen.

  To get a color screen, you need a TV with S-video.

  Good bye

• Intel grpahics TV-Out black & white issue

  Hello

  I have Toshiba L10-119 with s-VHS female connector on Intel Extreme graphics 2 and after you have connected to the TV screen - TV becomes black & white :-( I live in Poland and we have here PAL - DK, but none of the work of the PAL :-( I tried them all and the creen is still B & W. do you know what can be done? I have the latest drivers Intel but that did not help either. Sth can be changed in the BIOS?

  One last thing, I tried to use different TV and it's the same :-( Cable works fine with the Radeon 9550XT and others so its fine.

  What should do?

  Concerning
  MK

  Hello

  Have you ever tried to change some settings on TV? Is it perhaps option S-VHS?

• Satellite Pro A300D - black & white photo via S-video

  Hello

  I have a Satellite Pro A300D. After months of work perfectly, it now gives me a black & white image on my screen extended through my S Video Jack, although my laptop screen is in color.

  I checked all the wires and they are fine. Did I miss something?

  Thank you

  Hello

  I had the same problem on my laptop satellite. I connected the laptop to my TV using an S-video cable and the image was just black & white.

  After reading here in the forum, I founded that I should try another cable. So I went to my local computer store and bought a high quality cable. I plugged the laptop once again on TV and everything was fine! :)

  And don t forget you check the settings of the TV in the display driver. If you have an NTSC TV, you will need to use this mode, otherwise the PAL mode.

• Satellite M100 - screen turns white when you press the bottom of the frame of the screen

  Hello

  I have a strange problem with my Satellite M100.

  When to start the laptop, the screen is totally blank.
  When hand press to the middle part of the bottom of the frame of the screen (black plastic frame) the display looks fine, as long as I am pressing on it.
  When let pressing, the screen becomes funny,

  Also noticed, when top screen downstairs, appears blurry white screen.
  But the screen is OK as long as I pressed the plastic at the bottom of the screen frame.

  Any idea would be greatly appreciated, want to confirm which part is faulty, so I can avoid replacing the whole LCD.

  Thanks in advance.

  Hello

  For as far as I know the small part called FL inverter is hidden behind the frame s screen.
  Maybe it s something with this part. Who knows it would be necessary to test this
  On the other hand, one cannot rule out a display problem

  You see, it's hard to say, really a malfunction which part
  Therefore, it would be advisable to contact a technician for laptop

  See you soon

• corners of screen fading white

  Here are the SPECS

  HP TouchSmart IQ800t custom screen 25 in desktop.

  • Processor T8400 (2.26 GHz, 3 MB)
  • • 4 GB DDR2 800 MHz memory system (2 x 2 048)
  • • 512 MB NVIDIA GeForce 9600M GS HD
  • Drive hard • 1 TB 7200 RPM SATA 3 Gb/s

  Updated for 64-bit Vista to Win7 Pro 64-bit for over a year

  The computer was purchased in 2009

  Recently, I noticed that the upper right and left of the screen seem to be fading/blur. It looks like a faded transparent white is David down the corners. At first, I thought it was my head on the origin of this light, but when I moved the computer out of the light appeasement was very apparent.

  I do not think it is software or to make graphs. I updated the NVIDIA graphic card several times due to another problem with the screen blacking out when I play a DVD or downloaded movie - this problem is still not resolved. I think that the map should simply be replaced period.

  Back at the screen, my inclination is that I have the dirt inside the screen, or the screen goes wrong? And Yes, I cleaned the screen with a soft cloth and a cleaner LCD... transparent white is inside not the outside of the screen. My questions:

  Someone else met this kind of screen fade?

  Is it possible to clean the inside of a PC screen like that?

  Or is it the age? And if so can it be solved?

  Any help would be greatly appreciated!

  Mizzy

  Hello jmiah1,

  Looks like the screen is going bad for me. Usually if the screen is disconnected the screen will turn white. Given that it is just the corners this indicates to me that the region has turned on the screen. The only likely resolution is a replacement.

• Picture on TV is black & white

  I have connected my Toshiba laptop to my TV on the TV out (S-Video) connection to SCART. I have now bought a new TV that is HD LCD, but when connecting, the screen is black & white.

  I have looked everywhere and tried all possible combinations, but obviously not the right that I can't solve.

  It must be something simple, as I could see the color in my previous TV, but now I see black & white in my new LCD TV.

  Could someone please advice?

  Hello

  I think that there could be two possibilities.
  Either the TV settings are bad (s-video port settings) or pins cable SCART-s-video-<->don t match with port SCART on the TV set.

  I had a similar problem. On my TV, the picture was black and white and on my parents TV I was able to display in color.
  In my case, the cable was bad.