screen changed to opaque after update

Similar Questions

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• Inspiron 3437 black screen on wake-up after update 8.1

  Hi guys,.

  I recently bought this dell inspiron 3437 and windows update to 8.1.

  After the update, the screen remains black if the laptop has been in mode 'sleep' for more of, say, a few minutes.

  I read that it is a common problem after update to 8.1 windows, but I have not found a solution that works for my laptop.

  Any ideas on that?

  Update: yesterday I returned to windows 8, assuming that the 8.1 caused this problem.
  However, I get a black screen on wake up again and I have to do a hard reset.

  Edit: went back to 8.1 so that I could install this driver from Intel. Why is it not a standard update or in the support section of the driver dell?
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23323&keyword=4400+graphics+driver&DownloadType=drivers&lang=eng

  Edit 2: AAARGH, who has not yet set... After a few hours of sleep he still would not wake up properly.
  So, I choose not to let my laptop to sleep, instead I leave it hibernation.

  I have changed this in the poweroptions. Just put everything to hibernate instead of sleep (so when the lid is closed, when you press the powerbutton).
  It takes a few seconds extra for the laptop to wake up (but still quite fast, less than 10 seconds), but at least the screen comes alive.

  PS. Sorry for all the dubble posts suite thisone. Assume that something went wrong yesterday.

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• The screen resolution has decreased after update drivers

  After update my drivers graphic suddenly decreases the resolution of the screen and I can not find recommended resolution

  I also, I can't find anything in the view of the dxdiag(DirectX Diagnosis) is there a way to solve this problem.

  I also tried to ride my driver and nothing happened and reinstalled again even if nothing

  happened that my pc is Lenovo ThinkCentre M58 SFF.

  I have download the because it might solve the problem but whilt installation it says that your computer does not meet the minimum requirements to install this software

  Click Start, type: Device Manager

  Press enter

  Expand graphics cards

  Right-click of your display driver, and then click Properties

  Click on the driver tab

  Click the driver rollback

  Restart, and then see if the problem is resolved.

• External screen does not work after update of El Capitan

  Hi all

  I hope someone can help out me with this. I have a MBP 2011 (i7, 4 GB ram, 330 M) and since I've updated to El Capitan (now 10.11.2) my external screen no longer works. I use a HDMI Cable MiniPort who worked before the upgrade. I am trying to connect to a 720 p TV and tried to connect it to my 28 '' ASUS monitor 1080 p that I normally use for my Windows desktop. None worked. My MacBook display blinks for a while when I connect it and then nothing. I was not able to connect it to my projector via VGA USB adapter until I've found the last update on the Web site of the adapter, then at least the display has been resolved. I tried the 'View to detect' button in the preferences system, no luck.

  I had the same problems. I installed El Capitan in MacBook Air early 2015. My external monitor is Dell P2314H. After installation, the MacBook Air is no longer detected the monitor, and the monitor does not save any video input to the computer.

  I chatted with Apple Support, but they don't give me satisfactory answers.

  Then I came across this answer on another thread of discussion the similar question:

  Re: El Capitan does not detect my external display

  And the solution that works for me is proving to be as simple as changing the cable. So I stopped using official mini Apple displayport to HDMI/DisplayPort/DVI connector. Instead now I use a cable (mini displayport to displayport in my Dell of MacBook Air) I bought locally (I live in Jakarta, Indonesia). It works like magic.

  I hope this helps you.

• HPStream x 360 ConvertiblePC 11: touch screen does not work after update of Windows 10

  I updated my computer to Windows 10 but the touch screen no longer works. I've updated the drivers, but there has been no change. Any suggestions?

  Amazing! Problem solved!

  I heard there was a reset function in Windows 10 but I really didn't think he would do anything. The touch screen did not work when I originally did a new install of Windows 10 so why would it now? But he did. My touch screen works well and even better, he deleted loads of disk space.

  To simply type "reset" in the search and recovery option returns to the update & security. 'Start' this PC with Reset and select this option to remove all. After about an hour or two, my computer was fully functional. The downside was having to reinstall applications and files, but is not a major concern.

  Result!

• Touch screen no longer works after update to IOS 9.3.1

  MY touch screen of my iphone + 6a stopped working after the update to IOS 9.3.1. I tried force closed all day and it made no difference. does anyone know how to fix this?

  I have exactly the same problem with the same Iphone with IOS 9.3.1 + 6

  The only way I can get to work again for a light moment is to reset the Iphone now deep-set buttons home and power together until it restarts.

  It works for a short period of time, and then it freezes again.

  Started to occur immediately after the update restarted the phone.

• Blue screen with Vista Ultimate after update

  I use Windows Vista Ultimate Edition and the update for Windows Vista for x 64-based systems (KB970653) after the download and update to the list of compatibility view Internet Explorer 8 for Windows Vista for x 64-based systems (KB973874) at startup, I get a blue screen.  I then go to restore before the update and the computer works fine.  What do you suggest me?  The KB970653 says it's an important update.

  Hi Mike,.

  Thanks for choosing the Microsoft Answers forums.

  I see that these updates are causing issues in Vista systems.

  Please go through the links below which contains the fix for your e. from follow the steps in the link provided by Kevin Hau - MSFT

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/276904c0-e775-4AC9-92b3-8abf465f8d4d/

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/276904c0-e775-4AC9-92b3-8abf465f8d4d/

  Cumulative update of zone of August 2009 for Microsoft Windows operating systems

  http://support.Microsoft.com/kb/970653

  Hope this helps,

  Kind regards

  Support of yama - Microsoft.

• I can't disconnect or change user account after update vista Home premium SP2

  Acer e380 with vista home premium 32 bit OS 3 G of Ram
  After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

  When I choose logout of the system never disconnects, and I have to hard start
  When I chose to change username the same thing happen it never disconnects and I have to hard start

  I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

  NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

  -Online do NOT install applications as well !<>

  7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

  11 restart again.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

  15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

  16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

  17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

  18. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• 2 versions of firefox and the maintenance service are listed in "Uninstall or change a program" after update

  I have updated to firefox from 15.0 to 15.0.1 using the dialogbox "About Firefox". under "Uninstall or change a program" in windows 7 x 64 I have now the two versions of firefox 15.0 and 15.0.1 registered as being installed.

  also, I had previously disabled the option "Use a background service to install updates" and uninstalled "Mozilla Maintenance Service". now the option of background service use has been reactivated and the "Service Maintenance of Mozilla's ' has been reinstalled. I really like how mozilla has zero respect for the fact that I don't want some unnecessary services installed on my computer, just so that I don't have to click on a UAC prompt once per month.

  I'll probably just uninstall the both firefox and the maintenance server and reinstall firefox. both versions are supposed to be there or is this a bug? and why reinstalled substantive service and the option is enabled when specifically, I uninstalled and disabled before?

  Edit: I just checked my other computers. 1 windows 7 x 64 with the maintenance service installed and the other xp with the maintenance Server uninstalled or disabled. two computers only list 15.0.1 as being installed and the maintenance department was not reinstalled on my xp computer.

  Just to let you know, the maintenance service is not running on your computer at all up to and update must be installed. It does not all resources and is perfectly fine to stay on your computer.

  As for the problem with two versions of Firefox, uninstall the other oldest (make sure not to remove your personal data) and see if the new version works.

• Screen appearance Aero disappeared after updating MS

  I had an update Microsoft, rebooted and my screen looked a little strange.  Then I remembered my old screen XP MS had that look.  It is the appearance of the classic view.  I opened my control panel to reset my Aero display... but it was more a this option.  What could cause this?

  The only way that seemed finally to resolve this did a system restore to a point earlier.

  But I want to know why this could have happened.  Do I have something broken in my software?  Do I have a virus or worse?

  I use Kaspersky... (not that I think it's terrible), and Hitman pro... doesn't mean no threats found.

  Probably because your windows update is configured to install updates recommended day and not ONLY important updates, and as a result graphics motherboard drivers.

  Check your windows update settings, driver install updates directly from your PC manufacturer, or the manufacturer of the motherboard in the case of a generic desktop computer

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.