Screen to win 8 black after booting with slider (boot UEFI)

Similar Questions

• Satellite M30, screen remains sometimes almost black after start up to several minutes

  Satellite M30, WinXP

  Sometimes, the screen remains dark, which means that you can see that a little bit news startup in the background and also the Office of windows, up to 2 minutes before suddenly become really turned on.
  Not even the latest version of the BIOS has a change. And what's weird, is it still does not appear. A non stop-and-shut-down-start sequence showed that it appears about 2 to 3 times.
  What could be the reason?

  Hi LeTom,

  did you use the os recovery toshiba or a clean install?

  It seems that the display shows a fault, then here are a few questions to play safely!

  There the failure also occure when the Red Toshiba logo appears shortly after starting start?

  If you are using a clean install of the OS, you need to do a complete new installation with the Toshiba Recovery CD (attention all data will be lost, make a backup).
  Then, the laptop is set back to the default settings of the software and if the failure occurred, you should check the material by a Toshiba service partner!

  I think that the M30 is still under warranty!

  Bossi Bye

• My Dell 9400 Inspiron computer laptop under Win. 8.1 boots to a black screen.

  My Dell 9400 Inspiron computer laptop under Win. 8.1 boots to a black screen. I have to press the power button 2-3 times before it will start to the lock screen, so I can connect.

  What can I do to fix this?

  Karen Osborn

  Hi Karen,.

  For a better understanding of the issue, I would need more information on your side.

  1. Do you have an error message when you start the computer?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:

  1. due to conflicts between external devices.

  2. due to conflicts between the third-party applications.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest to unplug all external devices connected to the computer except the mouse and keyboard. Check if it helps.

  Method 2:
  If the problem persists, I suggest you to download and install all Windows updates available including the optional updates and check if it helps. You can also download and install the latest device drivers for all devices on the computer and check if it helps.

  Method 3:
  If the problem persists, I suggest to start the computer using safe mode and check if the problem occurs or not. If this isn't the case, the value of the computer in a clean boot state and check if that helps.

  Step 1:
  I suggest you to return the item to start the computer in Mode safe.

  Start settings for Windows (including safe mode)

  Step 2:
  If the issue happen not in Mode without failure, perform a clean boot and check.

  Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot for a problem in Windows

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.

• IdeaPad S500 Touch - screen goes black after driver update

  I have a Lenovo IdeaPad S500 Touch. It is running the latest update of Windows 8.1. He proposed an update of the video driver from Lenovo. After downloading and installing the update, the screen went black. When the computer reboots, the Lenovo logo appears on the screen, and it goes black again. No matter what I try, that's all.

  Does anyone have a suggestion?

  Thank you

  James

  Hi Scoutmaster316,

  Welcome to the Community Forums of Lenovo!

  You will need to restart the system in safe mode.

  There is the only option to boot your situation is down to the system startup

  When you turn on the system, Lenovo Logo appears then black screen maybe wait a minute hold it the power button down until the accident it you must reapeat this 4-5 times until it starts to a page like this

  

  Once you have got to follow these choices that

  Troubleshooting / Advanced Option / start parameters

  Then you should rerach options with, select Safe mode which.

  If the driver is the problem, you should be able to start here,

  Open the Device Manager and rollback video driver

  Concerning

  Solid Cruver

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• HP pavilion monitor go black after the splash screen

  When I start my pc, the splash screen appears on the monitor, but after that he's black. I can hit one of the f keys to take me to the start page or diagnosis, but when I change the path of startup and press on save, then enter it just go to the screen black I have also hit the f9 key to go to the diagnostics page and run the hp diagnostic tool edge who said past when I try to return to the screen black new go! at first I thought it was a graphics card problem so I replaced the former with a same something new, I also tried plugging three different locations on the graphics card, I started with the dvi connector with an adapter on my cable even not, it will display the start page, just go s strait to no signal , so I went on the VGA slot that has been, I can get to the start screen, finally I tried the hdmi port and again, I can get to the start screen, but then it GB Black I removed the ram and cleaned and was going to try to go to Detroit from the motherboard to the screen, but I got scared when I saw the black cap with the words DO NOT REMOVE this topic! I tried 2 different monitors just to eliminate this probability but now I am just confused ideas would be appreciated!

  Hi lostone64,

  The fact that you can see the splash screens makes me think that this isn't the video port or motherboard. My hunch is it could be a hard drive failure, operating system error, or problem of display settings. You never see a Windows screen until it goes black?

  Have you tested the hard drive or made sure it appears in the BIOS?

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Screen becomes black after being left idle only recourse is to turn off the power

  Our screen goes black after being left idle for some time.  The only recourse is to turn it off.  The keyboard does not (without CTRL-ALT-DEL).  I tried to return to the previous registry spot without success.  Any ideas?

  Hi Flair24,
   
  -Have you made changes on your computer before this problem started to happen?
  -Set the screen saver vacuum? If so, change the screen saver to another and check if this might be the cause of this problem.
  -Do you have any particular power on your computer(sleep/hibernate) model?
   
  For more information, see:
  Change, create, or delete a power plan (scheme) 
  Post back with more information to help you help the better.

• While watching Netflix my screen goes black after a few minutes

  E-mail address is removed from the privacy *.
  While watching Netflix, my screen goes black after a few minutes. It's something new. How can I increase the time before that happens, or eliminate entirely?
  Thank you for your help.
  Sincerely,
  Byron Johnston

  Hi Byron,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems while watching Netflix your screen becomes dark. I'll be happy to help you with this problem.

  (1) how you try to access Netflix?

  (2) you use Internet Explorer to access the Web from Netflix site?

  (3) you receive an error message?

  (4) is the issue limited to a Web site or with other sites as well?

  (5) have you made changes on the computer before this problem?

  Method 1: I suggest to turn off the screen saver and check if that helps.

  Enable or disable the screen saver

  http://Windows.Microsoft.com/en-us/Windows7/turn-your-screen-saver-on-or-off

  Method 2: If the problem persists, I suggest you to contact Netflix support for assistance.

  http://www.Netflix.com/help

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• BlackBerry Smartphones Storm1 screen turns black after sheathed

  I have Storm1 with v5.0.0.328 OS, with 3 "third party" installed applications. (Visual Voicemail, VZ Navigator and VZw tones) I do not have, or do anything else is running in the background. My problem is occasinally, after I unholster my Storm1, the screen is black. I press the buttons at the bottom of the screen, even the release button, nothing happens. I have to do a battery pull to Storm1 works again. Normally when I unholster Storm1, the wallpaper is displayed with a message, the screen is unlocked, press on unlock button to unlock. What's this problem of "memory leak" or something else?

  Thanks for the help. I did the upgrade to v5.0.0.419 on my Storm1. My computer is Windows Vista, so I had fun a little hard to find certain files (c:\program files\). He did not exactly "vender.xml", but I managed to make it work. I did the backup and restore when the software prompt RIM came out. Only problem, all my MMS saved disappeared, but a single message from Verizon is still there. I consider that it is minor, because I saved a few media media card. I can can still send and receive e-mails, sms. MMS. I do not know if this OS update will solve the occasianally Storm screen goes black, after unholstering. But I mark this resolved for now.  Thank you.

• Satellite M70 - 340 - the screen turns black after that charge BIOS

  Satellite M70 - 340 screen turns black after that BIOS loaded. Please help

  Hi Totius,

  This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.

  The problem is in this case you can t a lot because this problem of material based on s.

  You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.

• When the computor screen projector turns black after hitting fn F8 and screen projector flashes

  When you use a projector my computor screen turns black after hitting the fn F8 and screen projector flashes in and out, how to fix?

  It never worked correctly?
  If Yes
  Did you change since then?
  You can use system restore to revert to this point?
  If not.
  You try to play on the computer and the projector at the same time? What happens if you just play through the projector?
  Try to update your driver for graphics card via the laptop manufacturers site or the manufacturer of the graphics card if a desktop computer, do not use windows update.
  Update DirectX
  Reduce the graphics acceleration of the map - http://www.myvideoproblems.com/Tutorials/HowDoITurnOffAcceleration.htm
  Disable other programs running.

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul