Scriptures of the printer, but nothing comes

Similar Questions

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• says it is printing but nothing comes out

  All-in-one HP Psc 1350

  X.7.2 OS

  My utilities said printer sends the document to the printer, even shows % finished (no message offline or idle), but nothing comes out of the printer.

  Also impossible to install the software as "PowerPC is no longer supported.

  Thoughts?

  Hi the4kosmos,

  Indeed the software on the CD supplied with your printer, or also the software available on the HP download pages are not compatible with Mac OS 10.7 Lion. However, you can install the HP Printer Driver Update 2.8, which contains the drivers printing and scanning (via print & scan, preview or Capture of Image).

  You may already have? If not and you use a different print driver, I suggest that you simply remove the current printer queue. Make sure that your device is connected directly to the USB port on your Mac. Then add the printer and you should get a message that there is software available to install - accept, so installing the respective drivers. See this document for more details: OS X 10.7 Lion: install and use the printer with Lion

  If this message does not - maybe you're not connected to the internet - you can also download a full package of the HP Printer Driver Update 2.8: HP v.2.8 OS X printer drivers

  Information on how to scan without the HP software, you can find here: How to perform a scan in Mac OS X 10.6 and OS X 10.7 without use of the HP software

  On the question of printing, make sure that your device is connected directly to the Mac's USB port and the USB cable is not longer than 3meters. You can also try another USB port and USB cable to another if the problem persists.

  Hope the information is useful.

• My officejet 6500 e709n makes the sound of printing but nothing comes out on the page. thoughts?

  I replaced the ink cartridges, cleaned the print head, turned switch, unplugged for a reset and reinstalled on my computer (Mac OSX 10.5.8).

  Nothing seems to be a problem with the printer visually - not clear jams oddities in the internal mechanisms.  He just "pretended" to print.

  Some error messages I received early in the troubleshooting process has suggested that ink cartridges are not compatible with the device (they are) and a warning to use the power button before turning off the power.

  There are more messages on the screen - complete just the icons of ink.  Everything seems normal.

  Thanks for your time!

  Try the steps in this troubleshooting page.

• printer sends a piece of paper in the printer, but nothing is printed on paper

  Printer was working fine this morning. Installed a new cartridge Photo 564, purchased at Staples. All the other 4 cartridges are full of ink. "Print" key contacts printer; that is the printer sends a sheet of paper through the paper. BUT the paper is white; nothing is printed on it. have tried to close / disconnect printer for a minute - did not set.

  In addition, the document on the glass - located and will not copy it. Paper out - no text...

  Please disregard/cancel - printer is more work

• Re: Satellite P200-13Z is on but nothing comes on the screen

  When I turn on my laptop the lights come on as usual and you can hear the fan but nothing cames up on top of the screen.
  Then a little light orange on the cd from the drive that lights up but I do not have a disk in it

  Did you perhaps updated RAM modules?

• The printer displays up to 40% print, but nothing happens

  Original title: I try to print from the laptop to the printer

  I try to print from the laptop to a lexmark 4650. It will show what it will print, she even wake up the printer and then show up to 40% print but nothing

  Hi goofy55,

  1. don't you make changes before the show?

  We recommend that you run the printer Troubleshooter and check the result. To do this, try the following steps:
  a. see solving printer problems
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• printer has ink and looks like it is printing, but nothing is on paper

  I am trying to print on my printer HP photosmart Premium. She "acts" like printing but nothing is on the page. The ink cartridges are filled.

  You specify the model of your printer, but this issue seems to be pretty common with several models of the HP Photosmart Premium.  I saw no definitive answer.

  The printer ejects white of paper when printing sheets - a list of 10 "solutions" of HP who seem less and less relevant and more desperate towards the end of the list

  General HP Print troubleshooting suggestions.  Note that if you have not used the printer for a long time, it is possible that the print head is blocked.  Run the cleaning steps proposed could help - but they use a lot of ink.

  If the print head is really in bad shape, it might have to be replaced.  I wouldn't do it until everything else has failed.

  A thread on the topic in the HP support forum.

  You might find help here, although a quick search didn't turn anything--> http://www.fixyourownprinter.com/forums

  Good luck.

• 7200 printer: photo 7200 printer acts like it is printing, but paper comes out without any ink

  I tried to print photos.  The printer pulls the paper of photo through the machine and acts like it is printing, but paper comes out the same as it began.

  I was unable to print a document, machine not to copy, use genuine hp cartridges, some levels many other low, but non-printing ink.  In fact, I disconnected power to the printer and restarted, it.  Subsequently, he printed as it should.  Thanks for your help.

• "unable to connect" iMac to the printer, but other devices peuvent

  I have a HP Officejet which was working fine, then all of a sudden not. When I try to print, I get an error "unable to connect to the printer, will try again in 30 seconds." I deleted the printer several times and added in my preferences, so my iMac can see the printer, but when it comes to print to it, is not going to see it.

  In addition, I have no problem, print on it to my MacBook Pro, nor fact my wife on her MacBook.

  If I type the IP address in a browser on any other device including my iPhone, I can reach HP diagnostics and configuration screen, but my iMac just times out.

  Things I've tried: resetting the printer preferences. Deleting all HP prefs in the library. Updated with the latest version of the software of HP for Snow Leopard. Adding the printer using the IP address. Installed the latest driver from HP, Apple.

  This is a clean installation of 10.6.5 (same OS other Macs are running. This started happening a few days ago and prompted me to do a clean install, as I had other questions. I thought the clean install might clarify the issue, but the problem persists.

  Where did you got your HP software?  Has it labeled as being compatible with 10.6?

  Restart your Mac and your router.

• Printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out

  I have a printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out. I can't find the ink level monitor. Can you help me?

  If all else fails, read the user guide:

  http://files.support.Epson.com/htmldocs/sc88p_/sc88p_ug/wwhelp/wwhimpl/js/html/wwhelp.htm

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...

• My macbook bettery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happened.

  My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.

  You can try another charger?

  Also-

   - Press the Option button and click it - system info - Power - post what is shown on the battery please

• Computer recognizes the printer, but does not install

  Original title: printer / driver problem

  My HP Officejet 5610 all in one printer just stopped working after 3 years.  I tried to reinstall the software disk... the error log will accomplish even his race.  I think I have a driver problem, but don't know how to fix it.  The computer recognizes the printer, but cannot complete the installation.

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can follow this link completely and check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.