Second installation of the SUMMIT on the same server

Similar Questions

• RAC: Installing several "different SID" RAC installs on the same Unix/Linux server...

  Hello my good people.

  I had to see if this is possible.

  Lets just keep things simple from the start.

  Let's say I have 2 Linux servers called "nodes 1 and 2.

  Nodes 1 and 1 have an installation of RAC 11 GR 2 running with the $ORACLE_SID defined as "XEV".

  NOW,.

  This is where I ran into some trouble.

  I have an another Oracle database that I need to install "RAC 11 GR 2" but the $ORACLE_SID will be different and it will be called 'Kai '...

  But I want to do it on the same servers Linux two 'nodes 1 and 2'... You following me now?

  So, in other words, I have 2 totally different databases that need to be "CARS" which will have to live on the same 2 nodes?

  Is it STILL Possible?

  Please let me know... This could be a "show stopper"...

  Yes, it is possible. And here is the easy way to do it... fire upward the database Creation Assistant (DBCA). The utility will create another data base, same CARS, on the same server. It is also for the databases punctual too. The DBCA Wizard will ask you a few questions and you will have this second database running on the same cluster Oracle RAC in no time.

  If it is possible to have multiple databases running at the same time, remember that each needs its share of the resources of the operating system. So make sure you have plenty of CPU, RAM and able to support all the running instances on the node for disk i/o.

  HTH,

  Brian

• Installations of multiple Apex on the same server

  Hello
  
  We plan to spend some of the data in our Oracle database to another database on the same server.
  Now the problem is that there are a number of Apex applications that use these data.
  So I wonder if it is possible to create a second installation of Apex (and HTTP server?) on the same server, connect to the new database.
  
  We use the database with Oracle HTTP server and Apex 3.1.2 10.2.0.4.
  
  
  Thank you
  Matthias

  Hello

  a database can have only one installation of APEX active. But you can have several databases with an APEX in each database
  on the same server. You can even use the same HTTP server - you just neen an additional inscription of DADDY for the second database APEX
  in your dads.conf file, for example

  
  :
  Database configuration data 1
  :
  

  
  :
  Attributes for the second database here
  :
  

  Does that help?
  Carsten-

• Installation of TEST and Dev or screw in the same server

  Hello
  
  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  
  anyone tried similar installation?
  
  Thank you

  Hi user;

  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  anyone tried similar installation?

  You can do this, I have already R11 and R12 and R12.1.1 on the same server. The main problem here is your server can handle all your instance on this subject, you may have a performance problem but thatsall.

  Either way, I suggest take oraInst.loc, oraInventory oratab file under/etc and and also create new user (applmgr-oramgr) of your new system

  Respect of
  HELIOS

• Dev to create and test instances of the Summit on the same server and database

  I have a dev and instances of the Apex on different servers of prod. I want a test instance on the same server as the instance of dev.
  
  I use workspace import/export so all the workspaces instance have the same id of the workspace. The application ID is the same on each instance in the same workspace. This allows the pages to be exported or imported in the case of differenct.
  
  My question is (I'm sure it's obvious) I can have several instances of the Apex on the same database (dev and test) and have each the same instance ID workspace, etc..
  
  Sam

  .. often I have multiple instances of the Apex on the same database (dev and test) and I each instance have IDS of the same workspace...

  No, there can only be one Application Express instance in a database.

  Scott

• Newbie: Mobile Server and Oracle DB must be on the same server?

  Hello Forum...
  
  I have problems to install the mobile server (ver. 10.3.0.2.0).
  
  First of all, I tried to install within an instance of the OAS (ver. 10.1.3.0.0) - I could not set the password of the mobile server oc4j account in enterprise manager server application and is stuck there. Also, I couldn't connect to webtogo as mobile server administrator.
  
  Second, I have installed the version of stand-alone mobile server, but when I run the 'runmobileserver.bat' I get the following error:
  
  09/08/22 12:54:21 log9: connect as: MOBILEADMIN
  09/08/22 12:54:21 log9: Mobile Server ID not found, impossible to register.
  09/08/22 12:54:21 log9: java.sql.SQLException: ORA-00942: table or view does not exist
  
  Like the previous time, I couldn't connect to the webtogo as mobile server administrator. [OS: windows 2003 Enterprise in both cases]
  
  I was informed by my dba that Oracle mobileserver will work only if it is installed on the same server as the backend database. Is this true?
  
  Thank you
  j - p.

  Hi J - P,

  When you installed the mobile server in stand-alone mode, repwizard was not performed or has failed.
  Try to rerun repwizard with: $ORACLE_HOME/mobile/server/admin/repwizard
  You can check the log file in $ORACLE_HOME/mobile/server/repository.log to see if there is a critical error,
  the repwizard should save your mobile server, you can consult this table: mobileadmin.mobileserver_instances so you can see your host name and port.

  On the Mobile Server OAS installation, you should not need to use the oc4jadmin password as if you installed OAS 10.1.3 and run the runinstaller lite Oracle to install Oracle lite 10.3.0.2. in the same ORACLE_HOME with run of the OAS, it should automatically deployed the mobile server j2ee application in the OAS.

  Kind regards.
  Marc
  PS: To change the OC4JADMIN password you can use the note: Note.460314.1 Ext/Pub cannot establish a connection with OC4J instance mobileserver on application server

• WebDAV: use of the different logins to different WebDAV folders on the same server

  Hello

  I quite often use WebDAV to access the various folders on a server on the Internet. I do this "Add a network location" in Windows Explorer, then using the address https Server (for example https://www.myserver.com/folder1). The first time that I need to enter the credentials of the user and the corresponding password and Windows seems to store them somewhere so that I can connect to this folder also after a re-login without having to re - insert my credentials.

  The question I have, is that I also need access to different folders on the same server (for example https://www.myserver.com/folder2) that requires different user credentials and passwords. The only way I have found is to remove the first network location, disconnect and reconnect to the Windows and then add the new location of the network in Windows Explorer; Just delete the first network location and adding the second network location would not be enough that Windows had always stored the context of the 1st network location and tried to connect with the credentials of the user and the password of the 1st second.

  Question: is there a less cumbersome way to remove context from a WebDAV connection, so that I do not need to disconnect and reconnect if I need to connect to the same server with different user credentials?

  Thank you very much

  Johannes

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• How to rename ASM starts after cloning disks of origin on the same server. ASMlib is used

  RHE Linux 6

  The single-instance grid installed Oracle (Oracle Restart) 11.2.0.4

  Oracle RDBMS 11.2.0.4 installed

  A 11.2.0.4 single-instance database running

  Our ASM GAVE, REDO, FRA mounted diskgroup

  We need to do a snapshot of storage for the creation of a copy of the current start ASM DATA, REDO, FRA on THE SAME server. Then we rename it cloned starts using the renamedg command.

  We did this several times if ASMlib is not used. For example, the command used when ASMlib is not used is:

  renamedg = newdgname = verbose = FRA2 FRA dgname true phase = the two asm_diskstring = "/ dev/oracle/fra *'"

  With ASMlib in use, I'm not sure the steps to follow

  First of all I'm not sure what should be provided to the asm_diskstring for the renamedg command parameter. I provide an asm_diskstring that identifies the path pointing to records belonging to the diskgroup cloned (I don't want to rename the original diskgroup). But ASM instance using ASMlib is the asm_diskstring parameter is in ' ORCL: *'.

  Second, I guess that after the rename diskgroup than asmlib returns an error because she would double discs.

  Could you please tell?

  Thanks in advance

  Massi

  Hello

  As you clone OS level, you have same ASMlib label.

  ASMlib mount always unique ASMLib label only.

  + You must identify these newly cloned device.

  + Rename these ASMLib force-renamedisk label after 1 Mb disk backup using dd read on a node.

  + Then run scandisks on other nodes.

  + Validate newly approved device is mounted or not on all nodes.

  $ ls - ltr/oracleasm/dev/discs / *.

  + Run command with asm_diskstring of/dev/discs/oracleasm renamedg / *.

  Kind regards

  Loriette

• Multiple vCenter on the same server database

  Hi all

  I'm migrating vCenter vCenter 5.5 5.1.

  Is it possible to use the same server SQL2008R2 for vCenter 5.5 database?

  Installation vCenter 5.5 database to the same server vCenter 5.1 will be will damage the 5.1 database? Use different database?

  What is the best way to secure the vcenter 5.1 during the installation of vcenter 5.5 database other than the database backup 5.1?

  Also does need seprate SSO database?

  Thank you...

  I used SQL dissferent account and vCenter was insalled on the new database without problems.

• Can the ESXI 5.0 and Vmware View coexist on the same server blade

  Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

  Kind regards

  Ismail

  VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

• FMS 3.5 R2 2012 and with Wowza Server on the same server

  Hello

  Is it possible to have my old FMS 3.5 on the same server, as I installed 3.6 Wowza?

  The server is windows Server R2 2012.

  I installed the FMS, but it does not start after installation and bat files cannot start/stop service either. It makes not a difference if I go to Services to start manually, the sample files still does not work.

  Any suggestions?

  Thanks in advance

  HC

  Hi Hans Christian RVN,

  FMS 3.5 is not supported on Win 2012 R2. You can give it a spin on the platforms supported listed in https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.

  ~ Ashish

• Cf11 and CF8 on the same server.

  Hello

  I need to install cf11 on the same windows Server 2008 as an existing installation of cf8.

  I know that it would be preferable to have 2 servers, but in this case it is not an option open to us, so I need specific help with the 2 installs.

  The current CF8 using IIS7.

  I did a bit of the spade work, and I think that the best way to do it cleanly would install a 2nd web server, such as apache on windows, and then configure it with CF11.

  I had hoped that I could actually install CF11 and simply configure iis specific sites with it, hoping it would leave intact the cf8 configured sites.

  Any help would be appreciated.

  If you have 2 webistes, one that you want to run with ColdFusion 8 and others you want to run with ColdFusion 11 on the same server then yes it is possible. However, two versions of ColdFusion do server same site on the same server.

  Launch the Web of CF8 Server Configuration tool and if CF 8 is configured with IIS all websites, then remove the connector for the set and add the site Web/sites one by one and you want to run with ColdFusion 8.

  

  Now, go ahead and install ColdFusion 11 and in the window 'Set up the Web server', choose the site you want to run with CF 11

  

  

  NOTE : two more important points to remember:

  1. do not remove the CF 8 connector if it is a production server

  2. do not choose all with CF 8 / CF 11 under IIS Web site, because if you choose ALL then all sites under IIS will be configured with this version of CF.

  HTH

  Thank you

  VJ

• SRM and VCenter on the same server?

  I was just by reading the documentation and I saw that I need to have vCenter in both places in my SRM deployment. Now I'm on a server. SRM and vCenter co-exist on the same server? Is it still a good idea. I don't have a problem with the purchase of another server if I need to.

  I have a follow-up question on the vCenter licenses. Do I need to purchase a second license for the recovering site vCenter?

  -Patrick

  SRM and VCenter can coexist on the same server.  You will see a performance impact when you test your disaster recovery plan.  I think that a lot of achievements have vCenter and SRM on the same server.  If you do not want to take the risk of a performance hit on your vCenter server you might move RS for its own box, but I advise to use a virtual machine instead of another physical server.

  I think that you need a license of vCenter to each site.  If your recovery site hosts only the DR then you can use your existing licenses for ESX.  If your DR will site also its own VM produciton is then you will need full license.

• 11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  You will always use the 9.3.1 existing environment alongside 11.1.2.1? If Yes, according to 11.1.2.1 documentation, if you want to keep your previous version environment, you must install a
  new machine and you need to replicate data. Previous installation may not work if it is installed on the same computer.

  You install and configure the software version 11.1.2.1 in a new location and move applications and data to the new environment of deployment.

  (1) install the EPM system on a new machine or machines. You can reuse the data and the existing database, or replicate the database and data to a new machine.
  If you migrate to a new machine, you must upgrade to a platform of the same type.

  For example, if the previous version was on a Windows machine, you must upgrade to a Windows machine. If the previous version was on a Linux machine, you must upgrade one
  Linux machine.

  (2) install the EPM system on the machine or machines (Oracle recommends that you install in a new installation location). You can reuse the data and the existing database, or replicate the database and data to a new machine.

  What is written on page 174 of the EPM 11.1.2.1 Setup Guide (http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf)

  I hope this helps.

• Oracle 11G and application server installed on the same server

  What are the advantages and disadvantages installation of Oracle 11 G database and Oracle (forms and reports) application server on the same server?
  
  Thank you in advance, Sonya

  Some people might want their data in an area of separate network for security reasons.
  It also depends on if it is the same people who do maintenance on db and appserver.

  It is at a lower cost with a single server and only 1 Os to implement.