Second monitor not detected Windows 8

Similar Questions

• Installed Windows 7 - Second monitor not detected

  So I just installed Windows 7 Ultimate (x 64) and everything that happened very well, but my second monitor is not detected. I am running Windows Vista and it worked but since I updated it stopped working, I tried 3 different monitors and have failed to update my drivers.

  Hey Zei,

  You need to update your video driver. In this case, you can contact your manufacturer to have updated.

  Thank you.

• HP Pavilion a6750f: problem dual monitor (Second monitor not detected in DVI input)

  Hello everyone, I'm going to by a problem of not being able to setp toward the top of my second monitor.

  I own a HP Pavilion a6750f with an ATI Radeon HD 3200 card on board running on Windows 7 Ultimate 64 bit operating system.  In the back, I have two VGA and DVI inputs, VGA works, but when I connect the other monitor which is connected to a DVI adapter on the back, Windows does not detect any.

  I tried to go the DVI adapter to the other monitor and noticed that it refuses to work. I will note that my display drivers are all updated and I activated the option of customization to detect the second monitor, nothing shows up, it will not be the same acknolowdge that there are several screens.

  I think it's weird that I don't see this problem being issued when I was searching for a resolution on google for hours now. If someone can help me here please I would be very happy.

  Just to remind you try to connect a VGA (analog) monitor to a DVI - D (digital only) output on the computer. This is never going to work as analog and digital are two completely different incompatible signalling methods. With the help of an adapter DVI / VGA passive is the problem that these cards may work with DVI - I or DVI - A output... not DVI - D.

  Wikipedia - DVI;

  "More digital, the DVI connector includes pins that carry an analog signal compatible with RGBHV signals in a VGA connector. This allows a VGA monitor be connected to a passive adapter and offers a universal solution for the DVI interface. The analog pins are the four that surround the apartment or cross the blade as shown on the right side of the diagrams below. »

  

  8 analog vertical sync

  C1 - analog Red
  C2 - analog Green
  C3 - blue analog
  C4 - analog horizontal sync
  C5 - analog ground

  Note the absence of the pins on your computer and your so-called card C1, C2, C3 and C4. Without these pins is not just going to work. Still, there is no way to get an analog VGA monitor to work with your digital DVI - D only output using a so-called DVI - D to VGA. You may be able to buy an asset DVI - D to VGA Converter, but this will be expensive and cannot provide a poor video image quality.

  As you said, the HP f1703 monitor supports only VGA. However, based on the specifications, your HP w2207h 22 inch LCD monitor supports the entry to a VGA and a HDMI input. HDMI and DVI - D share the same signage and using a HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable will solve your problem. For two monitors running on your computer, please connect as follows:

  Computer > HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable > HP w2207h monitor

  Computer > VGA cable > HP f1703 monitor

  Please send Bravo

• Second monitor not detected via the dvi - d port

  Hi I have a Hp slimline s5610y. Windows 7 64-bit. It is a new system with 3 ghz ram and more than 600 gaeremynck ram so I know that this is not a problem of performance, (duty handling system), I am looking to hook up two monitors, product sheet page on H.P. States that ports Vga and Dvi d may be used at the same time. I have the converter dvi-d/VGA, hooked to a monitor via the Vga port on a single computer (which doesn't work). The Vga port to vga works fine (the first monitor. I already check the easy as stuf "carrier dual monitor", unplug the monitor, update the latest driver for radeon 3000 and restart windows. I hooked two monitors before without any problem. Any ideas out there?

  Thank you

  Manny

  Hi again,

  If it is a dvi - d, you need a computer screens which have dvi - d.
  A graphics card with a dvi - i port also supports vga monitors.

  OK - page of your product (return i/o ports):
  http://support.HP.com/us-en/document/c02552467

  It is a true dvi - d - then Yes, you need a digital monitor with a dvi - d port.

  C.

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Then monitor not detected on win - 7, but works on Vista

  Background: Dell Vostro 1500 pc.  Acer HD 2nd monitor.

  I am trying to add Windows 7 Home Premium to another disk partition (d :)).  Now, I have win 7 and Vista dual bootable.  My second monitor, connected via a port SVC (?) 9-pin, is detected and works well on Vista, but Windows 7 does not detect.  I tried both the and-> screen resolution detect methods.  What is my next step?

  Thank you

  Jim

  The fix for the problem proved to be to download the latest driver for my NVIDIA graphics card.

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My laptop's built-in network adapter does not detect Windows 8

  I'm trying to share the internet connection from my laptop to another computer, but my laptop Ethernet card does not work. When I plug it in, the lights come on, but windows does not. It does not show it in device manager. I tried to install the driver, but it does not detect the card. Does someone know what to do? And the previous operating system, windows 7, worked perfectly with it.

  You may need to update the Ethernet card. Update from the manufacturer's Web site. Other possibilities include a problem with the connection that your ISP provides.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to pick out - something in itself, we find it hitched to everything else in the universe." -John Muir

• HP ENVY 5830 HDMI / DVI and external monitor not detected

  I have a HP Envy 15 with the ATI 5830.  I want to connect an external monitor.  The outside is a Samsung SyncMaster P2770HD and has a DVI (also has HDMI, but poor quality when used from a PC). My laptop has only HDMI.  When I use a DVI - D HDMI converter / my laptop does not detect that there is an external monitor.  I've lived all my settings and updated the Bios and video drivers.  I'm missing something. Appreciate any help.

  Hmmm... Looks as HDMI / DVI - D adapter for me, like the HDMI port problem works well insulated... I don't remember any problems, I've heard of HDMI to DVI - D and untimely on Envy 15...

• C7280 scanner not detected Windows 7

  One of my friends often ask me to solve its computer problems. It has a HP Pavillion DV6 Windows 7 / and a HP Photosmart C7280 all-in-one. The printer has always worked, but until today I had never tried the scanner. It took a while to find that she had never been properly installed. Attempts to do so resulted in ' operation could not be completed 0 x 00000015. The device is not ready "."

  I downloaded the set of drivers installed and complete, and later the update from the HP website. It made no difference. As I'm not a Windows 7 user, I feel a little out of my depth.

  Thos situation is recoverable?

  I can't be sure one she wa, but I think it was this one:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-106151-2&CC=UK&DLC=en&LC=en&OS=228&product=3204785&sw_lang=

• DC7700 Converible minitour: HDD not detected, windows does not load

  Hi, I have this computer running Windows, but Isaw today it shows no disk system error. I replaced the cables, I ran the HP Vision Diagnostic test and saw that it shows errors in the extended SATA Firmware tests-, error code is 990518 and the failure code is 503. SATA seq check test displays error code 990161 and error code 502 parameters test not valid. SATA random performance test fails also to 1% as the other two and also 990161 and 502 times as codes respectively. Should I change the hard disk or there might be an error in the BIOS or the system itself? Thank you.

  Hello

  According the information that you posted in your other posts and this post, I suggest you replace the hard drive.

• monitor not detected on ati hd 6450

  I installed windows 7 on a virtual machine installed vmware tools and updates

  past the video card on the virtual computer restarted

  installed the ati catalyst drivers

  restarted

  the video card is deected with no problems, but there is no display of the video card, I have a physically connected display

  Data sheet:

  MSI 990fxa-gd65

  16 GB of ram

  ACI HD 5450

  AMD fx-8350

  

  

  

  

  created a new virtual machine to win 7 and added the map

  installed ati drivers

  restarted

  installed vmware tools

  restarted

  VM automatically selected the display attached to the video card

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• Windows 7 does not detect my external monitor. Why? How should I do?

  Good, some basic information. The laptop at the origin of the problem is an HP laptop.  In other circumstances, I wouldn't care on this issue. But the screens on both of my computers cell phones don't work (they are Sun and incredibly difficult to see, barely visible) and I use an external monitor so for use.

  In other words, I used.

  I have Windows 7 for one of my laptops, and it is already fully charged. But, I tried to connect my external monitor, it did not work. I tried to use the projection screen, pressing [FN + F4]and pressing on [FN +] other F keys, as well. Of course, I thought it was weird. So I looked for answers on the internet (on my other laptop), nothing works. Most only have problems with the monitor not working not properly; mine is not detected at all. I went to the display settings (have to squint shine with a light and bend my laptop screen in different directions), and it showed only 1 screen, the main screen. I tried to restart, stop, unplug the monitor and in him plugging back and turning the cable around. I know that the problem is not the cable, as I use it right now.

  I also tried updating the drivers, but for one reason, the laptop now refuses to connect to the internet as well. So, now, I have a laptop completely useless with a black screen, and I can't put my files on it because of this black screen. Not that I'd be able to use it for something else, anyway.

  Hello

  Thanks for posting your query in Microsoft Community.

  Have you tried to connect the external monitor to another laptop?

  You can view the following items according to the questions:

  For problems with the monitor not detected
  refer to the suggestions of Geethu B responded requesting 24, 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/second-monitor-not-being-detected-Windows-7/0f8754dd-64da-4B25-aecf-341a19ebf469

  For problems with not able to connect to Internet

  Refer

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-8

  For the black screen of questions, check in safe mode:

  Safe mode starts Windows with a minimal set of drivers and services.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer works fine in safe mode, try the system restore, then check.

  Perform the system restore.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Note: When you use system restore to restore the computer to a previous state, programs
  and updates that you have installed are removed.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• bug report: warning dialog always appears on the second monitor.

  This applies to Adobe Illustrator CC 2015 (version 19.2.0). I already presented my bug report to Adobe. Here is what happens...

  Steps to reproduce the bug:

  1. cut the 'Application Framework'. Rearrange the palettes, and then create a new workspace. Quit and restart the Illustrator application.

  2. start a new document and draw something on it. Then close the document without saving it.

  3. a warning dialog expected pop up and say "blah blah blah...". If you do not save, your changes will be lost. »

  Results:

  Here is where is the bug: the pop-up warning will still appear on the second monitor, not on the main screen. This same bug also appears when the embedded image of Photoshop is changed and a popup will ask if you want to update. new pop up appears on the second monitor only rather than on the main screen. I even tried to go back to the main screen, the following warnings are always appear on the second monitor. I even changed my monitors autour by reversing the display ports and the problem persists.

  If anyone has a solution to this, would be great and I thank you ahead of time.

  Here's the dialogue windows always appear on the second monitor.

  
  

  I just upgraded to the latest version of Illustrator CC (2015.3.0 Release;) Version 20.0.0). The dialogue-box-appearing-on-secound-monitor question goes. You need to restart your Mac after installation before it takes effect.