Section consumption and the failure of the re-examination of handling message
Hi all
I have some confusion on the subject in weblogic /SOA.
- In one case, a topic having 2-3 steps of the consumer. After consuming messages, Ombudsman / BPEL process are the transmission of messages to the different endpoints (such as the BRM, CRM etc.).
What happens if a composite consumer is down at run time? This message will be will persist in topic? or after consuming the message by a consumer, it will be lost to the subject and
won't be available for more consumption once down composite will rise?
2. as in the queue, we can redirect the failure messages in the error queue if single transaction / queue is not broken in stream e2e.
Similarly, it is possible in the topic can? Assume that consumers of heading 2, (both picked up messages with success of the topic) but one of them in end2end stream error. (as when the target system). In this case, is it possible to redirect the message in the error queue?
Concerning
Thus, architecture wise there is not much difference between the NDA and JMS. EDN is based on the underlying messaging infrastructure that 11 g default is provided by Oracle AQ and 12 c by JMS. The good thing with EDN is that produce you and consume events natively in the Ombudsman and BPEL while with JMS, you may have to configure the adapters, destinations, etc., translation of native format.
EDN and JMS topics are more or less the same thing, i.e. providing communication weakly couple/asynchronous between two applications. In the NDA if you are limited in terms which components can consume and who can publish events.
Use the table following that little describes the components that can work with EDN:
Component | Publish | Subscribe |
---|---|---|
Ombudsman | Yes | Yes |
BPEL | Yes | Yes |
Human task | Yes | NO. |
ADF - BC | Yes | NO. |
Java application | Yes | NO. |
PL/SQL | NO. | Yes |
FMW control | Yes | NO. |
Hope this helps,
A.
Tags: Fusion Middleware
Similar Questions
-
When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
I have two subjects that I'm trying to move on to other topics. The thing that these two issues have in common, is that I originally used commas and apostrophes in the topic titles and the *.htm file names. This seemed to screw things, since my jumps to topics has never worked.
I deleted the subjects that were causing problems and they added without using punctuation. I can not yet jump to these subjects. To check if there was a restriction on the maximum number of hops, you can add to a project, I created a jump to a completely different question - the jump worked.
So, I think that something has been corrupted with these topics. I could try removing them and adding them "fresh" again, but I thought I'd post here to see if someone has encountered the problem before.
Thanks in advance,
ChristyGI managed to solve the problem by recreating (for the second time) the section titles and files and do not use any sign of punctuation of any well-founded. I think that the problem resulted from using the keywords that have been used and not used/removed/reused. I went to the tab Index, selected 'see also' in the drop-down list and delete keywords that have been put in bold.
-
I have NO SOUND on my computer and the Windows Media Player error message is C00D11BA.
To try to solve the problem that I discovered in the Audio tab in sounds and Audio devices properties, there is No default unit in the area of audio playback and No default unit in the peripheral zone of MIDI playback. In addition, the general tab in the properties of the device Audio USB says "this device is working properly" and that it is enabled as described in the use of the device box. The general tab of the device Audio USB also said the "Driver is enabled and working properly."
I am able to record dictation through a program of Dragon NaturallySpeaking.
I'm on Windows XP Pro with Service Pack 3, and before that I lost sound had not recently added that any hardware or software even though I may have uninstalled some rarely used program.
Hello
The usual cause of the error C00D11BA is when the sound card drivers are not installed or outdated.
Windows Media Player cannot play the file because there is a problem with the audio device, such as a map his or her controller.
Method 1:
You can follow this link & check if the problem persists.
Windows Media Player Error Message help
Method 2:
Diagnose and solve the problems of Windows audio playback automatically
http://support.Microsoft.com/mats/AudioPlayback/
You can also try the manual steps provided in the below mentioned link and check.
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/en-GB
Hope this helps and keep us posted.
-
BSOD "driver irql not less or equal" and the "thread of unhandled exception" messages
Hi all
Since I got my laptop motherboard replaced I started having BSOD issues with "driver irql not less or equal ' and"unhandled exception thread"messages. They appear very often (about once a week), but it's annoying anyway :) I failed to note any regular pattern in BSOD problem.
I've read the description of similar problems, so I guess that the problem is a faulty driver. Unfortunately my PC skills are not sufficiently advanced to solve the problem on my own.
Operating system
64-bit Windows 8
CENTRAL PROCESSING UNIT
Intel Core i5 3210M @ 2.50 GHz 61 ° C
Ivy Bridge 22nm technology
RAM
6,00 GB Dual-Channel DDR3 @ 665 MHz (9-9-9-24)
Motherboard
Acer VA50_HC_CR (U3E1)
Graphics
Monitor generic PnP (1366x768@60Hz)
Graphics Intel HD 4000 (Acer incorporated [ALI])
Storage
465 GB TOSHIBA MQ01ABD050 (SATA) 39 ° C
Optical drives
HL-DT-ST DVDRAM GT70N
Audio
Realtek High Definition AudioAntivirus: Kaspersky Crystal
The Minidump files: https://onedrive.live.com/redir?resid=A32073C9ADCE674! 106 & authkey =! AEZQAT-sNxtbU1Y & ithint = the file % 2crar
Thanks in advance.
The debugging session: killed Sep 16 01:29:43.916 2014 (UTC - 04:00)
System Uptime: 0 days 0:30:20.630
Loading the kernel symbols
...............................................................
................................................................
............................................................
Loading user symbols
Loading unloaded module list
.......Use! analyze - v to obtain detailed debugging information.
BugCheck D1, {b, 0, 0, fffff88005abf4b6}
Cannot load the image \SystemRoot\system32\DRIVERS\athw8x.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for athw8x.sys
ERROR: Module load completed but symbols can be loaded for athw8x.sys
Probably caused by: athw8x.sys (athw8x + 684b 6 )Follow-up: MachineOwner
Atheros Wireless LAN Driver Update.
Loaded symbol image file: athw8x.sys
Image path: \SystemRoot\system32\DRIVERS\athw8x.sys
Image name: athw8x.sys
Timestamp: Thu Jul 24 11:44 2012 (500EC2C0)First try ACER Support.
http://us.Acer.com/AC/en/us/content/drivers
Description of the driver: Atheros Wireless LAN driver
Driver update site: http://www.Atheros.cz/
-
I'm upgrading our server vCenter of 5.0 to 6.0 update 2.
At one point, I had these emails for each esxi host.
Try to install a profile picture without the signature and acceptance of audit level. This can be a big security (2016-06 - 07 T 14: 12:38.242Z cpu29:2685025)
It is a cluster of production vcenter. Please tell me what is normal?
Nothing serious happened. I think it was just vcenter 6.0 connection and update the connector / agent on the ESXi 5 existing servers so that they could be handled by the instance of vCenter upgraded.
-
error 201 to download the Lite!
Hi Teca,
Please see the help document that below that explains the error Code 201:
Download error, installation or update of Cloud Creative applications
You can also see the thread below where this issue has been addressed:
Error 201; CC constantly disconnected desktop application, will not download again
Kind regards
Sheena
-
BlackBerry smartphones cannot create new email address and the password are correct
Just transferred one of my domains hosting that I use for my other domain. Went to create an e-mail account for the 3 email addresses I had the BB under prior host. Removed the old accounts. Click Setup mail accounts, then other then entered the correct address and the correct password. Received message 'invalid address or password '. Not possible I installed these accounts on my PC and my IPad with no problems. It seems that BB won't accept any new domain name account that I transferred 10 days ago, can someone help me please? Thank you!
TCC - I THANK YOU first to respond to my situation and the second to be ON - it appears that you are an expert on the RIM! That was the problem - integration. Apparently my Blackberry account 'forgotten' about my domain name and had to be reinstated. I discovered by obtaining technical support for my carrier, AT & T and when they could not understand why the e-mail accounts could not be created, they transferred me to RIM. The first level of technology was also confused, but Nick and then of the immediately higher level of tech told me exactly what you have written here - same problem, same solution. CptS, thank you!
-
I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure
I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects
* original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.
Hi SCS PCs
I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
I hope this helps.
-
You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200. Have a Dell, Windows XP. Help! Not even sure who to ask...
What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?
Printers and faxes is totally blank?
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window and press enter
spooler request SCYou should see something like this:
Service_Name: Spooler
TYPE: 110 WIN32_OWN_PROCESS (interactive)
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0What is the 'State' displayed for you?
Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler". The status should be started and the Startup Type should be automatic. What are the parameters of your correspondents? If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again. Please report the results of your efforts.
-
Impossible to 'Uninstall' any program. When a program is selected in the section programs of all, and the word "Uninstall" is clicked, nothing happens. When the dialog box "Turn Windows features on or off" is selected, no buttons appear. Having run "System Restore" to solve the problem without success.
Hello
1. don't you make changes to the computer until the problem occurred?
Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.
http://support.Microsoft.com/kb/929833
Method 2: If the problem persists then I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys
Hello
I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.
Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.
A frozen about three times and then once rebooted showed the BSOD saying something the system failure.
So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.
Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.
I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.
Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.
Jacob.
To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.
There is information below data recovery.
And Startup Repair Info, too.
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dell recovery options:
Above is Dell to reinstall Vista from the DVD on your computer.
And that way if you have a recovery partition on your hard drive.
See you soon
Mick Murphy - Microsoft partner
-
Title: Hardware failure
My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent. What can I do?
Hello
1 have had any changes made on the computer before the show?
2 are you facing any problem with the hardware?
Method 1:
I suggest to see the link and try to run the troubleshooter and check if it helps.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
See the article and check if that helps:
Diagnostics of Dell hardware
If the problem is not resolved, contact the manufacturer for additional assistance:
-
codecs audio / video and the failure of permissions in low charge repairs
On Saturday afternoon, I lost all my audio on my pc and when I checked that I had also lost all my videos playing capabilities. and my office came down it was a gray screen with active Desk top with very large icons about an inch across and I couldn't in chrome, I spent the last 36 hours trying to fix the problem. When I finally get in the System Restore Wizard, he won't let go only to the 29 7 2012 when I tried to download my sound blaster creative disc is a 5. Mary after codec video instillation, I have not my computer control panel up and went to the devices and the properties were ok. t\hen and tried the speaker icons and now they no device, so it's something between the codec and the volume manager. + I've sorted the other failures on my desk I went show and fiddled about and I managed to get the sort we had calculates another problem with Google to be the best in the world, well it's not when it goes down it ask of to open a session in which you make / since it has my goggle request password and email they want to use my own name and for this reason that more poblem I lost my rag with them because they have 6 passwords for me as my 'old' was no good and if you put a few cities English and villages get underlined and when you go to the spell checker do they say thet, they are written poorly, I take this as an overview, and every time they send a key to check that they charge you for the message, and finally I spent an hour in train to download a codex of free media of KOCKHi and I downloaded it three times more codecs video repair audio media but every thim he would get down to the last second he would stop and say the lack of permissions to load this page MY WIFE AND I NEED A FREE TROUBLE DOWNLOAD WITH No. HIDDEN FEES AS WE can't afford * Cameron makes it more difficult to get what should thank you for your help
On Saturday afternoon, I lost all my audio on my pc and when I checked that I had also lost all my videos playing capabilities. My office came down, it was a gray screen with an active desktop with very large icons about an inch across. I could also not in chrome.
I spent the past 36 hours trying to solve the problem. When I finally get in the System Restore Wizard it won't let go only back to 29
When I tried to download my sound blaster
creative (it's a 5.iyx) After instillation
video codec I have not my computer control panel up and went to the devices and the properties were ok. And then tried the speaker icons and now they no device, so it's something between the codec and the volume manager.I've sorted the other failures on my desk; I went to view and tinkered with by the way, and I managed to get this sort.
We had another problem with Google, supposedly the best calculation in the world, well it's not. When it breaks down it asks me to connect, what you're doing, but since this is my google ask for password and e-mail; they want to use my own name and because of this poblem I lost my rag with them (because they have 6 passwords for me as my 'old' was no good.) Also if you put a few English towns and villages,
get stressed, when you go to the spelling corrector - they say thet they are written wrong. I take this as an overview. Whenever they send a verification key, they charge you for the message. Finally, I spent an hour trying to download a codex of the freedom of the press of KOCKHi. I downloaded it three times more codecs video repair audio media but every
Sorry - I tried to decipher all that--I did. I even reformatted to try to understand what your question was. Out of all this - here's what I think will probably be your best solution (free, but a lot of time).
Back up your data (pictures, music, documents, e-mails, contacts, spreadsheet, Internet favorites/bookmarks, executable installation and serial numbers and product keys, etc.) to support EXTERNAL - like CD, DVD< usb="" drive,="" etc. ="" anything="" that="" is="" not="" physically="" connected="" to="" that="" machine="" all="" the="" time="" and="" can="" be="" put="" in="" a="" safe="" place="" (like="" a="" safe)="" forever="" if="" need="" be="" and="" can="" be="" read="" on="" other="" systems="" in="" addition="" to="" the="" one="" in="" question.="" usb="" drive,="" etc. ="" anything="" that="" is="" not="" physically="" connected="" to="" that="" machine="" all="" the="" time="" and="" can="" be="" put="" in="" a="" safe="" place="" (like="" a="" safe)="" forever="" if="" need="" be="" and="" can="" be="" read="" on="" other="" systems="" in="" addition="" to="" the="" one="" in="">
System restore you have by default. How to do this will be determined by the manufacturer of the machine and the model and the options you have when you bought it. Could be a combination of keys to start, a menu in Windows option or even a CD/DVD set. Whatever it is - follow these instructions to the letter to get the machine to her virgins "by default" State.
Once he's back to factory default state - Windows Update. It will probably take a few reboots, etc - but better now than later. Followed by the installation of your applications and others to use. Make sure that those who are updates to their respective manufacturers as well.
-Restore your data you have backed up.
To get your computer sorted. Questions from Google, etc. - those go elsewhere. This isn't a Microsoft problem or even probably a problem with your specific computer.
One thing I'll tell you - if you come across something someone/thing ' a you indicating that your computer can be fixed with a simple program. It's a lie and you will have yourself and your wife the kind of trouble that of climbing is probably expensive and painful (mentally). So ignore this type of waste.
-
I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?
I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you
Hello
Since there is a new check laptop with the seller and ASUStek support for warranty
repair. As OEM ASUStek is responsible for the good operation of the equipment both
and Windows. Keep in mind do you more they tell you it's something
you did it. Added that even if you are somehow able to solve the problem you
would that he documented in the case of other problems on the road.ASUStek support
http://support.ASUS.com/ASUStek Forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-usASUStek drivers
http://support.ASUS.com/download/download.aspx?SLanguage=en-us=======================================================
If you really want to solve the problem (which I do not recommend on a new computer
under warranty):Results verified BlueScreenView WinDBG / DumpCHK.
The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.
9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}
Probably caused by: iaStorA.sys
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sysBUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys
iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.
fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
Loaded symbol image file: iaStorA.sys
Image path: \SystemRoot\System32\drivers\iaStorA.sys
Image name: iaStorA.sys
Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)Collate ASUStek support, their drivers and documentation online and ask for their
Forums about known problems.BiosVersion = K56CA.206
BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">->
most recent version. Also check updates the chipset drivers and other key embedded
and separate device drivers.
SystemManufacturer = ASUSTeK COMPUTER INC..
SystemProductName = K56CA
Family = K
SystemVersion = 1.0
SystemSKU = ASUS-NotebookSKU
BaseBoardManufacturer = ASUSTeK COMPUTER INC..
BaseBoardProduct = K56CA
BaseBoardVersion = 1.0ASUStek links above.
After checking with ASUStek and if necessary to check updates with Intel.
For the Intel driver update utility<-- run="" this="" after="" checking="" with="">-->
http://www.Intel.com/p/en_US/support/detect?redirector_count=1&Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
http://Downloadcenter.Intel.com/Forums and Intel - Support - community
http://intelopenport.hosted.Jivesoftware.com/Community/TechI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
->
Maybe you are looking for
-
iOS 10 calendar widget shows empty lines
IOS10 running on an iPhone 5s. Occasionally (not always), the calendar widget will display blank lines instead of the tests. for example, there could be 2 tests and 1 bday to show, but the widget will show 2 empty lines and a 3rd with just the icon b
-
Vista is liked after being locked up
I have Vista w / SP2. The configuration is that after a period of inactivity, the computer is locked and the screen is off - perfect, that's what I want. But since a few days ago, almost everytime when I try to wake up to the top of the screen and un
-
Change the desktop icons and the font to normal size
My pc recently changed the size of the icons one police itself to a larger size, I tried to remedy by goin to the appearanca and personalization in the Control Panel, but everything seems to be normal. How can I solve this problem?
-
How can I copy cassettes to my computer to create a CD?
I have a tape recorder, but it does not copy on a CD. Can I use my laptop to do? I plugged the headphones outside on my tape drive and the other end of the cable is a stereo PIN. I was told to put it into the microphone of my laptop. Now what sho
-
Remember - this is a public forum so never post private such as ema information You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem