Selective impression want 5530

Similar Questions

• Want 5530: want to scan from the front panel of the printer computer

  Hello

  I am not able to use the scan to computer function from the front panel of the printer to a PC recently updated.

  On the front panel, I press 'Scan', then 'computer '. The name of the computer to which I want to scan is listed, so I select it. The scan preview screen appears then I press 'analysis '. After a standby display told me that the computer does not have to check the cable, etc...

  The PC is turned on, and the connected user.

  Printer is connected directly to the PC via USB cable.

  PC operating system is Windows 64-bit 10.

  Printer is 5530 want all-in-one.

  HP Print and Scan Doctor no problem.

  I tried with a disabled firewall.

  I uninstalled and reinstalled several times (using a new download of HP).

  When I open the printer software 'manage the scan' is not listed (only the Scan item is 'search for a Document or a picture", that works).

  Test page will print from PC.

  Another PC (running Windows 8.1, connected via a network) seems to work.

  Any suggestions?

  Hello

  Thank you for using the HP Forums.  You can try this:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1 uninstall the software from your computer

  Try this program to uninstall Microsoft

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  If you are installing via a USB connection, connect the USB cable only when prompted by the software.

  Let us know if it works!

• Want 5530: Install 5530 want twice on same PC with different printer profiles

  Running Windows 7 Pro.  I want to install my 5530 printer like the first time with the name of the printer that includes 1 side printed and it default profile 1 side printed.   I would then like to install this same printer a second time, but with a name that indicates 2-sided with his descriptive default on 2 sides.  The first install the Panel very well.  However, the software will let me install a second time.  It stops in the process where I tell it to connect via USB.

  I can install it using the Win7 "Add a printer", but nothing will be printed on it.  It seems to use a port USB, for example USB006, where the printer software creates a "printer virtual port xxxx".

  1. How can I install the 5530 desire a second time on the same PC with this own printer profile?

  2. in the "Devices and printers" Win7, it sort of just "copy" the first instance/profile of the printer to a second instance if I can just change the profile?

  Hello

  Devices and printers, click Add printer and select a local printer.

  Select the LPT1 port, and then click Next.

  Select HP or Hewlett-Packard in the manufacturer list, then the HP Envy 5530 in the printer list, and then complete the wizard.

  Once you have finished, right-click the existing copy of the 5530 (the one created by the HP software) and select printer properties.

  The tab of Ports to take note of the selected channel and close the window.

  Right-click the newly added copy and select printer properties, select the same port as configured for the original printer and press OK.

  You can set each printer as required and name it accordingly.

  Kind regards

  Shlomi

• Want 5530: Installation of printer driver for want 5530 and Windows 10

  HP Envy 5530 worked well on Windows 8. I upgraded me automatically to Windows 10 and now the printer does not work. I tried to download the update from HP for Windows 10 and followed the program of troubleshooting provided by HP, but without success. I read comments that suggest that it is not possible to a 5530 want a PC to the network operating Windows 10. Certainly, this cannot be correct. Advice please.

  Hello @GBeastall,

  This is a great place to visit for a community support and HP! I see that the printer does not work since the upgrade of Windows 10. I wish I could help you.

  In the printers and devices window, check which shows the name of the printer and if it is set as the default printer.

  Print a configuration page to obtain the IPv4 of the printer address: print a Network Configuration Page.

  • Check the port assigned to the printer on the computer to see if it matches the IP address of the Configuration page.
  • In devices and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.
  • It must be checked on the TCP/IP protocol.
  • Click on Configure Port to display the IP address.

  If the IP address does not, via the HP software, add a new device.

  1. Click on the Start button () or the lower left corner of the screen, then clickSearch.

  2. In the search box, type HP, and then click the icon for your printer. The software of the printer opens.

  3. Click utilities, and then click on the software & selection of the printer.

  4. Click on connect a new printer.

  Test the printer.

  Please try the steps outlined in this document, if you still have any questions: after 10 upgrade Windows, printer problems appear.

  Let me know the results of printing and scanning doctor.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• Impossible to get want 5530 to print

  Hello

  I recently decided to upgrade my printer for a wireless printer, so I bought a HP Envy 5530 because my old hp printer lasted more than 5 years. I'm a little disappointed because I can't get my printer to print on the network. I used printing HP and doctor Scan and no luck. I tried to turn my firewall off, no luck. I am out of options and I am really frustrated by that. Is there something I can do? I don't want to hook up with USB otherwise I will continue to use my old one and just return a new. Help, please

  Hello

  Forget the CD that comes with the printer. Please download the following software and save it to your computer:

  http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-5/EN5530_188.exe

  (a) turn on your printer and turn on the radio (you can see the light from flashing bule),.

  (b) to ensure that your computer is connected to the wireless internet through your network,

  (c) right click on the downloaded file and select run as administrator.

  (d) follow the intructions, allow your printer to use your computer to connect to your network.

  (e) at the end, you can save your printer can create connected HP if you want (Note: you can do it later).

  Please post back the result or error.

  Kind regards.

• reinstalled ho want 5530 softwate and stil does not print

  I was told by a representative of hp to uninstalland reinstall my ho 5530 printer softwate envy.

  the did and followed all instructions and after alli we said and still cannot print

  also used the scan hp and not good impression doctor, I still can't print what do I do to start printing

  Sue tauber

  [Personal information]

  I ran the fix ulity micrsoft and he got rid of the printer deskjet 3520 of the control panel.

  now my fixing the trayapp.msi is so I can finally print to my hp printer want new 5530

• Want 5530: double-sided printing 5530 hp envy

  After uninstalling and reinstalling the 5530 want to my laptop to fix a connectivity problem, I can't find the option to print double-sided. I tried to update the software of the printer, but do not always have option for double-sided printing. How can I be able to restore the double side print?

  Hello
  Make sure the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Try now print and check for the difference.

  Kind regards
  Shlomi

• Suddenly, when I print a selection from an email, it prints on about 10 white pages and somewhere in there, the selection, I wanted to.

  I use Firefox 12 on Windows XP. Things worked well until just tonight. Now, when I select Print/selection in my email, it spits out multiple (like, maybe 10 or more) blank pages with just a header/foot on them. I followed the instructions for the reset of the printer of Firefox AND setting reset all printer of Firefox settings, and she always does. Everything prints fine in Internet Explorer. This printing problem becomes REALLY painful. I don't want a workaround solution complicated, I just print a selection. NOW why didn't it work?

  Assuming you are using the print optimized page (webmail page layouts are quite complex), it's probably question 12 of Firefox that the relative position of the selection on the page is preserved when printing. Not the best way to save paper!

  To work around this problem by using an add-on, check out:

  https://support.Mozilla.org/en-us/questions/927457#answer-333518

• Want 5530: 5530 want envelopes printing

  I try to print a DL size envelope (11 x 22 cms) using Word and the envy of 5530. I loaded it according to the instructions on the HP site several times, but the printer keeps ejecting indicating that the paper is too short. I moved the envelope back into the tray just to make sure that its starting position is ok, but no joy.

  Welcome to the HP Forums @Donfitzg,

  I read your post about the problems you're having with printing envelopes your craving for 5530 DL and wanted to stop and share my own suggestions. The printer supports certainly this type of envelope size, so I would recommend running the printing and scanning Dr (below), to see if it can fix any printer software problems. If the feature full driver and software is not installed, install the full software and try printing again.

  This is also a specific guide on how to print on envelopes. The instructions and diagrams might help too. Printing envelopes (Windows)

  Using Print and Scan Doctor for Windows to help troubleshoot printer problems

  You can use the printer wizard install here to install the complete software for your printer: use of diagnosis HP for printers HP Windows tools

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' If I guided you towards a solution!

  Best wishes

• Want 5530: Resize > > > Fit-To-Page issues

  Hello

  Last December, I bought a 5530 envy and implemented a wireless connection to my printer.  I used the copy feature to enlarge the Sudoku puzzles from the newspaper to the size of a sheet of paper (which makes them easier to work).  The following procedure worked perfectly for a few weeks:

  1. tap on the screen of the dark printer.

  2. press the copy icon.

  3. tap on settings > > resize > > Fit-to-Page.

  4. press the arrow on the back page.

  5. tap on the option of black ink.

  As I said, it worked very well.  However, the same procedure does not work now.  Instead of getting a full Sudoku puzzle page, I get a copy of the puzzle that is a little larger and located on half left of the page about 2 inches from the top of the page and 3 inches from the bottom.  I see two possible explanations:

  Theory 1.  Somehow, I screwed up the printing preferences/options for my printer.  I played with these settings trying to solve my problem, but nothing helped.  My current settings are:

  • Orientation: Portrait
  • Paper type: plain
  • Print quality: Normal
  • Pages per sheet: 1
  • Without borders: Off
  • Printon both sides: back on the long edge

  2 the theory.  In my view, there may have been a software update of printer somewhere around the time that presents the problems started.  When the resizing feature worked, neither my wife or I remember the white, square icon that allows the user to select the number of copies to print.  We may be wrong, but I think that this feature has been added to the system or I somehow envolked just change my preferences/options.

  Any ideas?

  Badger66

  Hi * MissTeriLynn *,.

  I tested my system this morning and it worked... I have no idea why.  I had been 'play' with the settings during the weekend but had only partial success.  I followed your suggestions regarding a software update and determined that my printer is already configured to accept automatic updates.  I guess that of the case and the system now works fine.
  

  Thanks for your help.

  I will report this issue as resolved.

  Badger66

• WANT 5530: claim code

  My 5530 WANT prints make the page your printer, but there is no claim code

  Hi k336,.

  If it had rained for 24 hours, you will need to print a new page of information for a new claim code. With some printers, the claim code is the number and the characters before @hpeprint.com. For example, if your page of information has an email like this address: [email protected], abc234vbn3434 would be the printer application code.

  Go to the code of print requestfor more information.

  Let me know if this helps. :-)

• Want 5530: several images, e.g., passport photos

  How can I print multiple images of an image, such as passport photos, on a sheet of paper?

  To print multiple copies of a picture in HP Photo Creations, set the menu of Number of Copies on the number of copies you want. You can select from 1 to 10 copies by clicking on the triangle, or enter a number directly.

  This screenshot, we are about to print 11 copies of a photo on a sheet 8½x11.

  Open the advanced settings for more options, such as the removal of spacing between pictures.

  Hope this helps,

  RocketLife

  

• E-all-in-one printer want 5530: wireless set up for jealousy 5530

  Our new HP Envy 5530 printer works very well connected via a USB cable, but cannot be found by trying to set up as a wireless option with either my Lenovo H5 PC (via a Netgear A6200) or a laptop Lenovo W540.

  The printer connects to the same / correct SSID (BT Hub 3.0) and I tried to remove the firewall to see if it was what kept the whole upward.

  Any help would be appreciated.

  Welcome to the community @Matticus HP

  I read your post on how your printer is not detected when you try to set up wireless. I want you to try the steps in the guide below you should get properly connected wireless.

  A 'printer' display the error to the HP ENVY 5530 e-all-in-one and Deskjet Ink Advantage 4510 e-all-in-One Printer Series

  You can also see another thread, that I posted and check your router settings if the guide above did the trick:

  Re: HP 7520 loses connection wi - fi

  Good luck!

• Want 5530: scan 5530

  Hello

  Sorry for my bad English but I'm French speaking.

  I want to change the directory where my printer to store the results of the analysis. I can't find this option in the HP software (! it's the french software supplied with the printer).

  Thank you for helping me.

  Daniel (Brussels-Belgium)

  Hello @Stockel1949 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking in the analysis destinations.  I'd be happy to help you!

  Select HP Scan and select advanced at the bottom right.  Select the Destination, and then select the destination of your choice.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Want 5530: problems with the scan from the printer

  Hello

  I only just bought a 5530 want all-in-one printer and it gives me problems from the outset.

  It installed fine, but when I try to scan from the printer to the computer I get the following window will appear on the computer:

  

  Which I think should happen. In my view, that he should start the correct software without having me to do anything.

  But even if I click on the "HP Scan", the software does not start, but it does not save the scan in the default location. I thought it was supposed to launch the software and allow me to choose what happened then.

  I can boot the computer software and scan as I want, but I think that to happen automatically if I scan form the printer to the computer (the printer).

  Someone at - it suggestions?

  Hi Rainbow7000,

  I had tried most of the steps that you propose before displaying the original question, but thinaks for suggesting it is useful to check.

  I managed to fix it myself.

  Basically the pop-up window was left during a previous installation of HP hardware. Even though I used the uninstall program provided, it was not completely uninstalled (annoying). So I uninstalled the new printer and then went through the registry and deleted any reference to previous material, the new printer, any other hardware HP, etc... I do not get into the registry to do this kind of thing but if the 'correct' uninstall program do not do so I have no choice.

  I then installed the printer again and it works fine. Now when I press the button it scans directly to the computer of choice and Windows Explorer appears to show the new file.

  If someone else is a similar problem and plan to do what I did then I have to remind you of the dangers of editting the registry...

  Thanks for having a look at this problem, your suggestions are appreciated.