Service complain

Similar Questions

• Try SAML sender - guarantor, standalone Java client call to the service bus.

  I built a stand-alone Java using Jax - ws client. It produces a header WSSE containing a SAMLAttribute and SAMLAuthentication instruction in option.
  I tried to configure a proxy service on the servicebus (10gR 3) using ws-policy (weblogic version, not ws-1, 2), set up a SAMLIdentityAsserter (v2), a partner of identity provider and a SAMLIdentityNameMapper.
  
  [I get the message weblogic.xml.crypto.wss.SecurityTokenValidateResult@ca32f2[status: false] [the msg SAML token is not valid.]
  sending the SAML assertions which seems valid to me.
  
  If you see something missing or invalid in the language SAML, something missing in the config or something else, I would be really happy.
  
  All the examples use a SAMLCredentialmapper, but I'm building a stand-alone client, so a weblogic SAMLCredentialMapper is out of the question (?).
  
  the request header:
  < S:Header >
  < xmlns:wsse wsse: Security = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" S:mustUnderstand = "1" >
  < saml:Assertion SAML = "urn: oasis: names: tc: SAML:1.0:assertion" xmlns:ds = "http://www.w3.org/2000/09/xmldsig#" xmlns:exc14n = "http://www.w3.org/2001/10/xml-exc-c14n#" xmlns: XS = 'http://www.w3.org/2001/XMLSchema' AssertionID = IssueInstant "1246342701761" = "" 2009-06 - 30 T 06: 18:21.683Z "issuer ="http://openuri.org/service/customer/contact/contactInformationService"MajorVersion ="1"MinorVersion ="1">"
  < saml:Conditions = NotBefore "" 2009-06 - 30 T 06: 17:21.683Z ' NotOnOrAfter = "2009-06 - 30 T 07: 18:21.683Z" / > "
  < saml:AuthenticationStatement AuthenticationInstant = "" 2009-06 - 30 T 06: 18:21.683Z ' AuthenticationMethod = "urn: oasis: names: tc: SAML:1.0:am: unspecified" > "
  < saml:Subject >
  < saml:NameIdentifier Format = "" urn: oasis: names: tc: SAML:1.1:nameid - format: X509SubjectName "NameQualifier ="sb1sk"> uid = vsb, OU = smn < / saml:NameIdentifier >"
  < saml:SubjectConfirmation >
  < saml:ConfirmationMethod > urn: oasis: names: tc: SAML:1.0:cm:sender - vouches < / saml:ConfirmationMethod >
  < / saml:SubjectConfirmation >
  < / saml:Subject >
  < / saml:AuthenticationStatement >
  < / saml:Assertion >
  < / wsse: Security >
  
  answer:
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
  < env:Header / >
  < env:Body >
  < env:Fault xmlns:wsse = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" >
  WSSE:InvalidSecurityToken < faultcode > < / faultcode >
  < faultstring > token security failed to validate. [weblogic.xml.crypto.wss.SecurityTokenValidateResult@1061c5e[status: false] [the msg SAML token is not valid] < / faultstring >
  < / env:Fault >
  < / env:Body >
  < / env:Envelope >
  
  If the customer leaves out the element, wsse: Security in the header, the service complains
  header < faultstring > Security No. message but required by the policy. < / faultstring >
  
  The name of SAMLIdentity Mapper is never loaded at all (checked by logging into the class loading)
  
  
  The configuration in the identity provider partner:
  the URI of the audience: target: *: /.
  sender URI: / service/customer/contact/contactInformationService (also tried with a single string equal to what the client sends)
  virtual user: enabled
  confirmation method: vouches for the sender
  
  I do not use certificates (tried with and without)
  
  
  Policy in use for the proxy service:
  
  <? XML version = "1.0"? >
  
  < wsp
  xmlns:WSP = "http://schemas.xmlsoap.org/ws/2004/09/policy".
  xmlns:WSSP = "http://www.bea.com/wls90/security/policy".
  xmlns:WSU = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd".
  xmlns:WLS = "http://www.bea.com/wls90/security/policy/wsee#part".
  WSU: ID = "samlSV".
  >
  
  < wssp:Identity >
  < wssp:SupportedTokens >
  < wssp:SecurityToken TokenType = "http://docs.oasis-open.org/wss/2004/01/oasis-2004-01-saml-token-profile-1.0#SAMLAssertionID" >
  < wssp:Claims >
  < wssp:ConfirmationMethod > sender - vouches < / wssp:ConfirmationMethod >
  < / wssp:Claims >
  < / wssp:SecurityToken >
  < / wssp:SupportedTokens >
  < / wssp:Identity >
  
  
  < / wsp >
  
  
  StackTrace:
  weblogic.xml.crypto.wss.WSSecurityException: validate failure of security token. weblogic.xml.crypto.wss.SecurityTokenVal
  [idateResult@a4fc20[status: false] [the msg SAML token is not valid.]
  at weblogic.xml.crypto.wss.SecurityImpl.unmarshalAndProcessSecurityToken(SecurityImpl.java:630)
  at weblogic.xml.crypto.wss.SecurityImpl.unmarshalChildren(SecurityImpl.java:556)
  at weblogic.xml.crypto.wss.SecurityImpl.unmarshalInternal(SecurityImpl.java:448)
  at weblogic.xml.crypto.wss.SecurityImpl.unmarshal(SecurityImpl.java:416)
  at weblogic.xml.crypto.wss.api.WSSecurityFactory.unmarshalAndProcessSecurity(WSSecurityFactory.java:66)
  at weblogic.wsee.security.WssServerHandler.processRequest(WssServerHandler.java:35)
  at weblogic.wsee.security.WssHandler.handleRequest(WssHandler.java:74)
  at com.bea.wli.sb.security.wss.WssInboundHandler.processRequest(WssInboundHandler.java:116)
  at com.bea.wli.sb.security.wss.WssHandlerImpl.doInboundRequest(WssHandlerImpl.java:201)
  at com.bea.wli.sb.context.BindingLayerImpl.addRequest(BindingLayerImpl.java:257)
  at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:66)
  to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:508)
  to com.bea.wli.sb.pipeline.RouterManager$ 1.run(RouterManager.java:506)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs (unknown Source)
  
  Published by: user6080617 on June 29, 2009 23:39

  You have configured a SAML2 identity Asserter, which is not a v2 SAML identity Asserter!

  Replace this line of and try again.

• Workstation PC with full PCI (ie. 256) buses numbering?

  Hello!

  I have a problem with DELL Optiplex 7010 and two bodies SMU connected to it like this:

  Port of PC PCie8372 1-3 metres of cable-> SMU - 8370 >-> the 1 SMU-1065 chassis

  port 2-> 3 metres of cable-> SMU - 8370-> the 2 SMU-1075 chassis

  Problem is that in Windows nipxirfk event log service complained that "PCI Host Bridge: bus Maximum number limit reached before listing all devices, status =-313563 '.

  When I tried different things to solve the problem as withdrawal PCI GPIB bus and change SMU bodies on different ports on PCIe card, half of PC USB ports have stopped working and when I changed something the other half stops working

  PC has limited the availability of bus numbers:

  8< -="" -="" -="" -="" -="" -="" -="">

  = Detection of resources OR root Bus utility =.
  This utility determines the number of root PCI/PCI Express bus
  devices on your system and if there is any number of bus
  range limitations that could cause equipment problems.

  = SUMMARY =.
  Bus single root detected.
  Your system has a single root PCI bus.
  Bus root has a limited scope.
  The BIOS of your system has a limit on the number of bus range
  You can assign to your PCI tree. In Windows XP, this limit is ignored
  and has no effect. In Windows Vista and later versions, the limit is strictly
  applied and cannot be exceeded. Thus, the amount of MXI-Express
  You can reach the material is limited. Refer to the number of bus range
  below the limits of your system.

  = DETAILS =.

  -Root Bus: ACPI\PNP0A08\0 -.
  Bus numbers range: [0, 3]
  Status: Device is running

  This utility ran without error.

  8< -="" -="" -="" -="" -="" -="" -="">

  So I take is not enough PCI bus available on this PC to allocate sufficient resources for all connected devices. There is nothing BIO on bus PCI PC I could delete or nothing to what I could turn off, actually, I have to back PCI GPIB card and who will eat resources. The two bodies SMU are about half full of instruments and I need to add more than a few cards to one of them. PC BIOS is up to date. I was sort of the details with the support OR already, but they do not have solution. Our laboratory has two former HP/workstations DELL (is no longer available) with the limited numbering PCI bus that work with the same two bodies very well. I think that this problem is PC related BIOS and my computer is right on the limit of not working.

  Basically, I need to know a few current PC workstation, used successfully to control at least two 2 SMU bodies. If you could check you workstation PCI bus numbering capacity with this tool EITHER:

  http://digital.NI.com/public.nsf/allkb/BF84B75E08D2A7708625763B00670007?OpenDocument

  And display the results here, I would be very grateful.

  Jan,

  Some Dell BIOS have an option to set the number PCIe bus max.  A lower number allows more usable in a 32-bit operating system memory.  I saw him in some positions as the T3600 precision work.  On these machines, you access the BIOS and go to system Configurationoption"Configuration of the PCI Bus, and then change the value to something higher (such as 256).  Can you check for this option?

  -Robert

• (Redirected) How can I complain formally partner DELL and DELL customer service?

  I'm waiting more than eight weeks replace spare parts to DELL for DELL Latitude E7250 and E7240 computers laptops! Does someone know how to complain and to speed up the process?

  Initially, partner DELL says there is no spare part for sale! (it was the battery) your request and after I called DELL customer service, they changed their words and send a cost and delivery time 6-8 weeks (which is not acceptable). It makes no sense to wait for more than 8 weeks to get the knockout, battery or LCD for products still under warranty.

  Unfortunately, DELL customer support could not help and their response was not acceptable, it seems that DELL customer support and DELL partner care not their client :(

  Noting that we have more than 170 DELL Ultralight laptops and more than 300 computer desktop DELL Optiplex 7010 and 7020 only at the regional office and many others in the country offices.

  Hi elarousya,

  Please repost this in the customer forum help. It is a holiday of Thanksgiving here in the US, so it will be Monday before one is available to help you.

  http://en.community.Dell.com/support-forums/customercare/

  You can also send a private message to Dell - Lorna M. it is in our customer forum. She will return to work on Monday.

  http://en.community.Dell.com/members/dell_2d00_lorna-m

• How can I contact the complaining customer service?

  I am disabled and I have been to my local Apple store three times now to try to spend a lot of money, but the busy store is not geered upward at all for people with disabilities and staff tend to ignore me. I can't find how to contact someone at the service the customer to talk about this. Does anyone know how to talk to someone. I have need help because I can not even buy anything to support me on...

  There is a link contact us bottom right of each page of the forums. But first, did you call the store manager and ask if there is something they can organize? Perhaps a date?

• VMware fusion complains about map services smart

  People,

  Whenever I start my computer virtual 8.1 Windows I get a warning from Vmware fusion 6.0.4 whereby "an older version of card chip (pcscd) service runs on this system. Upgrade to the latest version to use virtual smart cards. ».

  Is it a problem of the host or guest? And how should I solve it?

  Hi atakacs

  The smart card reader connected to your physical machine, it is a USB smart card reader?

  While we are working on the issue of the setting, there is a solution to get rid of the warning message if you do not want to use the functionality of common smart card to share your physical chip with a guest card.

  After your Windows 8 VM is turned off, please open the .vmx file in your VM installation directory and type

  USB.ccid.disable = "TRUE" at the end of the file.

  ATTENTION: You can not share your smart with the guest card. You can always passthrough to chip at the prompt, if the physical chip is a USB one.

• How you complain about the appalling service

  How an express those disgust at the terrible service?  On Sunday, I bought Lightroom, but it wouldn't download properly; in accordance with the instructions on the e-mail, I rang Adobe on the phone number provided and for the next 50 minutes, I wanted while being transferred from one person to another until I was finally told that there is no phone support and that I have to go online.

  I talked to five people only the last seemed the least bit apologetic to the service I received, it was a refund of my money.

  Is someone can you please tell me what is the point of putting the phone numbers on the emails if you don't offer phone support?

  Hi Mark,

  The CC shows that it has been activated, however in a suite case CS: 0216192941 I find that they have attempted to contact you on 6 August 2015 & reached the voicemail.

  Please confirm if the problem is resolved, me message in private closed, so I can keep up with the team in question.

  Concerning

  Stéphane

• Qosmio X 70-A-10N issues after repair service

  I am a customer of toshiba in the long term and for the first time that I need to complain about something.

  I bought a toshiba Qosmio X 70-A-10n to 10.11.2014 in Serbia

  I asked to insert an ssd and install windows on it, I got it on the hard drive.
  Not a problem, I know do that staff.

  After less than a week its display starts showing the wrong colors, I tried to register on your website, it says that it is already international.

  After that I discovered on your official site for guarantees that its security began September 27, 2013.
  More than a year before I bought it.

  And I brought to the official service, where thay couldn't answer all my questions.

  But they have changed the screen, in term of 4 weeks and f * ed up a bunch of other things. Formatted a hard drive with a recovery of files, screched on a lot of places, and beside the touchpad when I put my hand while typeing it says tip tap, tup, or other noises iritating.

  Hi Aleks

  I guess that the laptop was repaired by service provider authorized in your country.

  Is that each cell will be set to before the repaired unit factory settings would be sent to the client. This was also the case even with my laptop.

  The ASP will always install the pre-configured Toshiba system in order to check the functionality.
  That's why he of STILL and highly recommended to back up data and personal files before you send the unit for fixing.

  With regard to the question of the touchpad:
  I'm not quite sure about that m noise but I imagine that this is linked to the touchpad setting that is located in Control Panel-> mouse-> last tab (here click on the button of setting or properties)

• Why Toshiba do not release publicly their Service manuals

  Last year, I bought a Toshiba Equium A60. Last week, does not have the backlight on the monitor. While I'm not really complaining that light is gone that I find it amazing that Toshiba seems not to publish their service manuals. I am a fairly experienced technical person and so I prefer not having to pay Toshiba to take the laptop and replace a light bulb. Before I do this, it would be extremelly useful if I could just have a service manual to refer to.

  I also have another laptop manufacturing. When the HARD drive failed on that I went to the Web site, easily located the correct and downloaded maintenance manual.

  (Of course if Toshiba Customer Service help me so apologies in advance!)

  [Edited by: admin]

  Hi jim

  It seems that only the service guys are able to use these internal documents.
  I think that it is not possible to download these documents, because information is not communicated to everyone.
  Of course, you find a lot of information on hard drives, memory, LED, etc in the manual which is preinstalled on your laptop.

  I would recommend asking the service partner in your country for a retail or / and assistance.

• Screw is missing after service and can't find the right display driver

  Last week, I complained about the weakness of the MIC and I sent mobile care Toshiba in Adelaide. Yesterday, they sent it.

  Problem:

  I checked the laptop carefully and discovered there is a missing screw near the wireless switch. (The type of screws must be F6.5). Pourriez-Toshiba sent me that screw so that I can put that back on?

  problem 2:

  The problem, my laptop had last week was low level of the microphone. I adjusted the level of the microphone to 100% and 0% boost, I can't do something the mic flag shouting at the mic.
  Yesterday when I check the den report, he said "his updated and adjusted video drivers mic boost, replaced mic, update bios, past all the diagnostics unit.

  It worked well when I checked. But for some reason, I need to re - install the laptop. After I reinstalled the system, the same old problem came once again! Then I updated the bios, audio drivers. According to the report, I should update the video driver too. I went to mytoshiba.com.au, in the download page of windows 7 for the P500, I couldn't find the video driver for my laptop. Mine is "NVIDIA GeForce GT230M version = 8, 15, 11-8642". The driver on the web page is '8.634.1 - 090729 a - 086065C - Toshiba AMD display driver.

  I even downloaded and tried to install the video driver. After the extraction is completed, I checked the basic information from this computer. The bios and audio drivers are updated, but the video driver is always the same and low mic level problem is still the same.

  Last week I called twice the phone supports, more than an hour of waiting, spent a lot of time on the forum, made a very ugly box and sent the laptop to the mobile Center, my laptop has been opened and changed the part and sent to me. After all this, I still have the same laptop with the same problem and now missing a screw!

  I appreciate the work that technicians did. They did fix the problem. But I don't want to send the phone to them each time after I re - install the system. So please tell me how to solve this problem.

  Hi sayhi80,

  I doubt that Toshiba you can send this screw but you must contact the service provider allowed again. I'm pretty sure they can send you the missing screws and you can install it yourself. This should take only a few seconds.

  Regarding your question on the display driver: what graphics card you have exactly? If you have an nVidia card, you can install the t AMD display driver.
  In addition, it would be interesting to know what laptop you have exactly. Maybe you can post the exact model number.

  Normally all the drivers are placed on the page of Toshiba

• Bad Service 3 months Satellite U400-157

  This is my problem with the Toshiba laptop travel:

  I bought in feb09 and held to my work to like once a week and then after 10 days what exactly I begin to install the system and use it.
  I discovered that the USB is not read my external hard drive that I bought as day of the laptop.

  I went to the shop where I bought it and they told me to leave and they send it to the service center.

  3 weeks later they said sorry, you have to pay money for the service because it is not under warranty more due to physical damage.

  I said there is no damage. The USB port does not work there is not zero even unique to my laptop.

  Sorry Mr usb is broken inside.

  How the hell can a user interrupt port on the inside? Please you can complain to toshiba headquarters if you don't like what we say, you must submit your complaint in exactly 7 days from the date of purchase.

  No find out about 7 days something can you please at least fix, sorry you must buy new motherboard

  Wow your laptop brand new, no single scratch even load any data yet I have to buy the new motherboard because they can not fix it under warranty and not more.

  What happens if the device has factory defult? No, Sir, it's impossible.
  Now this is happening since March until now.

  Can someone help me what should I do to recover my rights and have them fix it for me or give me a brand new.

  I hope someone can help me.
  I really feel blurred by Toshiba.

  Hello

  To be honest, I had never had any problem with my Toshiba service partner.
  I contacted my point of service twice because I had new adapter order because that one died.
  The part was replaced under warranty.
  Last time my keyboard has been replaced because some keys na? work t and the guys are really useful. The keyboard has been replaced very quickly and without major problems.

  Usually the laptop is covered by the international standard warranty for one year (12 months). During this time should be set free every hardware problem.
  Of course physical damage are not covered, but I think that it is nothing unusual because I don't know any manufacturer where the standard warranty would cover physical damage.

  Perhaps you could contact other ASP in your country in order to get a second opinion.
  It's worth a try.

  Here you can find the database of aspic all over the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  Welcome them

• When can I get my Toshiba service book?

  I'm sory because my English is not good.

  I want to complain to Toshiba of the Turkey because they give my phone me. Nearly two months ago, I gave my laptop for service (TNB). Normally, the Turkish law says "If technical services does not have the laptop 1 month, they give a new laptop" but they don't give me a new laptop. I don't use the computer for 2 months. I tell them, I want a new laptop. I tell them, portable, but they don't send me a new laptop. I call them every day. I call, I give the floor. They told me 'we call later, we call later', but they don't call me anytime.

  They don't give me my laptop. :(

  I hate them.

  TNB (Turkey toshiba technical service)
  Tel 90 212 340 60 80 =
  Fax: 90 216 422 55 20
  website:
  www.toshibatr.com

  I m sorry to hear you have such problems. Otherwise, I do not understand you can not solve this problem with service and clarify this situation. There must be a solution to this.

  We do not know the situation as a whole and we do not know what is the reason for all this and what we can read is only your version. It will be interesting to have more details and try to help you.
  I know this isn't what you want to hear, but every situation can be clarified by compromise and reasonable dialogue.

  Please be patient and try to talk with them. Just be cool and I think you will find the solution to all of this.

• Sony 55w790b tv with connected Wifi can not access internet services.

  I can use the Internet browser on this TV app, but discover the button on the remote control, which brings me to an Error Message that says services can not be access at this time. try again or cancel. When I click on a movie title.

  Everywhere I turn, I get this message.

  Except the Apps that do not work.

  I can't do a factory reset, many settings of the image to restore.

  What is the Solution, I hear a lot of people online complaining of the same problem and they say if you can access the Internet browser, then the problem is with Sony. And nothing should be done on my end.

  I noticed that the internet is slow over wifi and wonder if a network cable speed internet tv to the top. I have internet fibreop of the signal, it should be fast.

  The Tv need a software update. It works now. But wow Sony Community Customer Support is really bad. I still haven't answered my other questions. and I had to solve my problem in this post.

• SSH and SMB service starts not more

  Dear community,

  After you have installed the Add-it-Analyzer Log my RN10200 started having some problems that I was not able to see the shares via Samba more. I tried to connect via SSH to see what is the problem, but also the SSH no longer works. Since the web-admin panel still works, I tried to enable SMB and SSH in the Panel, but it briefly passes green and gray then again. I also tried to uninstall the add-on, but now get a package manager error. I then tried to reinstall the operating system using the boot option, but that did not help either.

  I removed the hard disks in the unit and their read-only to see what is poorly mounted. There, I found some permissions to be set wrong on the system partition:

  / mnt/systemOld # ls - la
  Total 124
  drwxr-xr-x 26 root root 4096 May 19 21:03.
  drwxr-xr-x 4 root root 4096 24 May 07:04...
  drwxr-xr-x 2 root root 4096 may 5, 2015 apps
  drwxr-xr-x 2 root root 4096 19 May 19:51 bin
  drwxr-xr-x 2 root 4096 17 June 2012 boot root
  drwxrwxrwt 2 root 4096 5 may 2015 given root
  drwxr-xr-x 4 root root 4096 19 May 19:51 dev
  drwxr-xr-x 79 root root 4096 19 May 21:32 etc.
  drwxr-xr-x 6 guest invited 4096 19 May 19:51 frontview
  drwxr-xr-x 2 root 4096 17 June 2012 home root
  lrwxrwxrwx 1 comments 5 houses 18 July 2015-> / home
  drwxr-xr-x 14 Guest invited 4096 19 May 19:51 lib
  drwxrwxrwx 2 Guest invited 16384 5 may 2015 lost + found
  drwxr-xr-x 2 root root 4096 media of 18 November 2012
  drwxr-xr-x 3 root root 4096 mnt 17 June 2012
  drwxr-xr-x 9 root root 4096 Nov 26 10:59 opt
  drwxr-xr-x 2 root root 4096 proc 17 June 2012
  -rwxrwxrwx 1 comments 1024 may 5, 2015 .rnd
  drwx - 5 root root 4096 May 19 19:51 root
  drwxr-xr-x 3 guest invited 4096 19 May 17:52 rsyslog
  drwxr-xr-x 2 root 4096 run of 18 August 2015 root
  drwxr-xr-x 2 4096 invited guest 19 May 19:51 sbin
  drwxr-xr-x 2 root root 4096 selinux 10 June 2012
  drwxr-xr-x 2 4096 comments 18 November 2012 srv
  drwxr-xr-x 2 root root 4096 sys 8 February 2013
  drwxrwxrwt 7 guest invited 4096 19 May 21:32 tmp
  -rwxrwxrwx 1 invited guest 33 19 May 17:48 .update_fail
  drwxr-xr-x 10 root root 4096 Nov 26 10:59 usr
  drwxr-xr-x 18 root root 4096 May 19 19:51 var

  Instead of:

  ls - la /.
  total 120
  drwxr-xr-x 26 root root 4096 23 May 07:40.
  drwxr-xr-x 26 root root 4096 23 May 07:40...
  drwxrwxrwx 1 root root 116 23 May 20:45 apps
  drwxr-xr-x 2 root root 4096 23 May 07:39 bin
  drwxr-xr-x 2 root 4096 17 June 2012 boot root
  drwxr-xr-x 1 root root 250 given may 22, 10:36
  drwxr-xr-x 13 root root 3480 23 May 20:53 dev
  drwxr-xr-x 79 root root 4096 23 May 20:46 etc.
  drwxr-xr-x 6 root root 4096 23 May 07:39 frontview
  drwxr-xr-x 1 admin admin 0 19 May 22:17 home
  drwxr-xr-x 14 root root 4096 23 May 07:39 lib
  drwx - 2 root root 16384 19 May 22:17 lost + found
  drwxr-xr-x 2 root root 4096 19 May 22:49 md124
  drwxr-xr-x 4 root root 80 May 23 20:53 media
  drwxr-xr-x 4 root root 4096 24 May 07:04 mnt
  drwxr-xr-x 9 root root 4096 May 13 16:48 opt
  root of Dr-xr-xr-x 188 root 0 1 January 1970 proc
  -rw - 1 root root 1024 19 May 22:17 .rnd
  drwx - 3 root root 4096 23 May 07:39 root
  drwxrwxr-x 26 root admin 820 run 23 May 20:53
  drwxr-xr-x 2 root root 4096 23 May 07:39 sbin
  drwxr-xr-x 2 root root 4096 selinux 10 June 2012
  drwxr-xr-x 2 root root 4096 srv 18 November 2012
  Dr-xr-xr-x 11 root root 0 may 24 07:05 sys
  drwxrwxrwt 7 root root 4096 24 May 07:17 tmp
  -rw - r - r - 1 root root 0 23 May 07:38 .update_success
  drwxr-xr-x 10 root root 4096 13 May 16:48 usr
  drwxr-xr-x 17 root root 4096 23 May 07:39 var

  could be the cause of the problem? Other ideas how to get SSH and SMB work return service or more diagnostic information?

  I have a backup of everything so a complete reset would be an option. However, I would like to understand the problem and solve it rather by using telnet, as seems to be a simple problem? It would be enough to reset permissions? What else could be causing this behavior?

  Thanks for the tips

  Best

  Steffen

  You will have to go folder by folder and read all the files, he complains and chown the permissions back to root instead of comments. Loïc but eventually you can get everything again.

• Methods to transfer data of Service Web Application LV?

  What methods do people have found it more useful to transfer data Services Web of LabVIEW and their instance of the main application? I have a project using LV RT and I would like to be able to send data to the target RT via HTTP requests.

  I found surprisingly little information on the different available methods / best practices for this and there aren't something I tried to do before - I use mostly of Web Services for hosting of static content that uses my library WebSockets.

  These are the methods that I know:

  -Static Variables: the only information of OR , I could find on the way to proceed was to create two shared variables, one for the RT, one for the Web Service and alias them. It seems ridiculous and is useful for data "tag.

  - File: write data to a file within the web service and read out in the application. Therefore, the file/folder for querying data.

  - TCP/UDP: write a Manager TCP/UDP in the application that listens to incoming connections, then create the connection and send the data inside the web service VI.

  - Server of VI: I saw a presentation here that speaks using Server VI (slide 8), but when I tried to get a queue named within the VI (using the instance of the application open / open reference vi at the request on port 4000), I get error 1100 (no queue found with the same name) of the published web service It does not seem to complain about not being able to connect to the instance of the application. Executes the VI locally or from the debug server works. See the attached project (LV2013) for what I tried.

  So, the question is - why my VI Server method does not work when it should (according to this presentation, I couldn't find the examples mentioned) and what methods people have used and had success with? I was hoping that the last method would be to succeed because it means I can push data directly into an existing queue manager, would be a fairly light and medium solution, I wouldn't need to write a custom file manager / network.

  OK - after playing more - I had no wired 'localhost' to the instance of the application open VI I thought I passed by default to "localhost" rather than "this instance of the application. Then I got the "VI Server Access is denied" and added * to the exported VIs list and it worked.

  Always curious to hear other methods / thoughts / success though.