Service issues wireless DRM

Similar Questions

• Issue wireless and slow graphic on Toshiba laptop

  It must connect to the Internet even I 30Mbit/s so fast connection and sometimes it is not even connect to the Internet from the worst wireless card that I've ever seen of the age.
  And can someone tell me what I have on the wireless settings when I test my speed it will not display the parameters: 356Mbits/s, he jumps, here is a picture where I mean what settings I have to correct this: [http://www.pikipimp.com/pp/pimped_photo/s/image/41/108/213/Sk_rmklipp4.JPG?ts=1233587970173]

  And the second 2 is the graphics card: oh my 6 year old laptop guy girfriends, and he acknowledges so fast when I click to watch videos online on the Internet, but with my NEW Toshiba laptop, I expect age to open video diffrient, here on example: [http://channelchooser.com]
  Why the graphics settings are so old so bad it sounds as if it was a joke, so slow when I play games The Graphic 3D - OMG - why?

  These 2 are not only the problem, but they are more important problem for me that's why I posted them, because there are more question, but it's only under Vista or XP as well?

  In your case I would update the graphics driver and WLAN.
  The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The image that you posted the question wireless is not available.
  However, I put t know how to access the internet, but it could also be a router issue. Try to update the firmware and check all of the WLAN settings on it and on your laptop.

  On the issue with online videos, I can say that you should try a different browser or plug-in (often you need Adobe Flash Player) is not working properly.
  Check and update software which are required for this.

• Satellite Pro L10-155: compatibility issue wireless card

  Hi all

  I wonder if I can install an intel Pro/Wireless 2915 abg minPCI card in my laptop Satellite Pro L10-155?

  I hope someone can help out me.

  Greetings Bosbeer

  Hello

  I'm not 100% sure but I think that your device isn't WiFi a loan. Please contact the partner customer Service in your country and ask them. They are specialized for the hardware upgrade and have accurate information on any hardware compatibility.

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.

• Service Access Adobe DRM

  Hello

  We use Adobe Access DRM EZDRM services to protect our media. Now since Adobe has terminated the contracts of all of their third-party resellers then what should be the next steps to continue our DRM service?

  Now EZDRM takes care of the part of DRM authentication and authorization and also gave us a tool to encrypt our videos. Now if we deal directly with Adobe so should we set up our own Adobe Access server and manage licenses, authentication, encryption etc. to our end using Java SDK?

  Thank you

  Raman

  Adobe Access DRM is sold directly by Adobe in Primetime from Adobe. It can be purchased as an option on site where you run servers you should be like an option of cloud hosted, where Adobe manages license servers. The latter is closer to what you are used from EZDRM. We don't operate encryption as a service... you can do it on your own servers using our software development kit, or you can work with a number of encryption / packaging as a service provider in the market that supported Adobe Access or Adobe Primetime.

  To speak to someone in sales on Primetime licenses click contact us on the upper right of this page:

  Protection of video content management, DRM, digital rights | Adobe Primetime

  Kind regards

  Dwight

• Web Services issues in Coldfusion 8

  Hi all

  I'm trying to deploy .cfc files as web services in a coldfusion multiserver environment 8.  So far it works not so well.  Every time I have navigate to the .cfc file in a browser, the empty page .cgi scope and not documentation of the component.  If I add? WSDL to the URL, I get the code for the dumping of scope .cgi.   You also cannot manually register a web service in coldfusion administrator.  (the components that will be the web services are marked as access = "remote", these same .cfc files have been and are used in CF) 7.1

  Cfc in the CFIDE folder files use the cfcexplorer.cfc component and have the documentation of the component.

  -----------------------------------------------------------------

  My environment:

  3 x blades Sun Solaris T6300

  3 x 8 processors

  32 GB of RAM

  Hardware load balancer:

  Juniper DX

  Partition NAS/Web support for webroot

  ---------------------------------------------------------------

  Does anyone know of any issues with web services in CF 8 multi-server environment?  Why don't the .cfc and .cfc? WSDL dump the scope of cgi and show me the documentation of the element or the WSDL file?  Is there a setting I'm missing somewhere in order to allow web services?  Why can't study documentation of CFCs on a file in the root Web?

  Any help or idea would be greatly appreciated!

  Thanks in advance

  Steve

  There is nothing web service and multi host ColdFusion or ColdFusion 8 which must be radically different then standalone CF7 web services.

  Y at - there anychance there is an own Application.cfc file that may apply to the ColdFusion component files?  Note that any file in Application.cfc (or Application.cfm) between the SWC file and the root Directory apply to the code that runs the web service.  There is a witch hunt often neglected with some Application.cfc files that use the onRequest() method.  This method can interfere with normal delivery in response to a request from web service wsdl if this has not been posted to in the onRequest() method.

• OT - Customer Service issues

  Anyone know what is happening with the Adobe Customer Service? I called 3 times separated on 2 days, and I am put on indefinite hold. I held for 30 minutes for 2 calls and today for an hour before giving up. I even tried to call the sales and the same thing happens. I have been using 800-833-6687. I even tried another phone number that was listed on the support portal page only to discover that the number was no longer in use.
  
  In addition to this problem, they sent me an email telling me my web case has been updated, but there is no case of Web not listed and the file number in the email does not have the case number that I was given by customer service last week when I actually spoke to a person.
  
  In addition to this problem, the log in page does not recognize my Adobe ID
  
  Someone at - it another phone number that I can try? Maybe an official person of Adobe will respond to this message?
  
  I am powerful checked disable!

  If someone of another encounter the same problem, would you be interested in what I did.

  I called their headquarters and talked to an operator. I told him about the problem to the customer service and explained the issue. She then transferred me to customer service management and I spoke to a supervisor who works on the original question.

  If you want to try this approach, call them corporate # is 408-536-6000.

• Service issues cell phone iPhone, update errors and activation problems.

  So I just returned from a stay in Germany yesterday. I got home and when I got my iPhone 5 s out, my iPhone would not connect to my carrier that is EE. It shows that «in search...» ", in the upper left corner, where it should display my carrier. I have enabled updates of the carrier, but did not find anything. I also removed and re-inserted my SIM card, but when I took it out it still showed the message "Search"... ». However, I found that it was and to update the iOS, 9.3.3. Immediately I thought this would be a solution to my problem except when I tried to install this update, I had "a software update cannot be installed at this time. Try again later"message. I then deleted apps, so I had 4 GB of data in case I didn't have enough space to install it. It did not work. Then I deleted the update and re-uploaded. Still nothing. I was frustrated now then searched the Internet for fixes, but for me, those difficult sites never really work, and of course, they did not. In the end, I decided to back up my data and content and do a reset. Now I begin to set up my iPhone and get to the part where I choose a Wifi hotspot, so I chose the connection of my house which is strong and should be able to maintain a connection to the whole upward. But after I click Next, it says 'iPhone activation', but then he says: "your iPhone could not be activated because activation sever is temporarily unavailable. Try again in a few minutes. "I tried again 10 minutes later and it still does not work. All I want is a solution, because I am now left with a useless phone and I am due to go to Spain in 6 days and will not be able to ring or text anyone. Help, please!

  A difficult here. Ultimately, this looks like a problem of free Wi - Fi connection. Try restarting your router. Also coincidentally, you might have a Wi - Fi chip or the faulty antenna.

  Here's a tip for the user on the problems of Wi - Fi. Many of them does not apply in your situation but worth the drive just in case.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Related issue wireless on Equium A60

  I have a laptop Equium A60 and upward of unitll recently, that I would never use wireless, but now I do, and I seem to have run into a problem.

  The computer is (apparently) configured to use wifi, but when I went to turn on the switch on the side of the computer's wireless, it wasn't a slide, but rather as a "on pop, pop off" piece of plastic with no way to 'turn on' the wifi connection.

  Is anyway to turn on internal capacity?
  Thank you
  Laura

  Hello Laura

  As much as I know WLAN card is not available on laptops Equium A60.
  Each laptop with WLAN card model has a WLAN sticker placed in the lower corner. Please check if such sticker is placed on your laptop s down.

• issue wireless IdeaPad z710 windows 7

  Hello. First of all, I would like to say that I love how the products lenovo puts out there.

  Second of all, I am frustrated. I just purchased a Lenovo z710 and dualbooted with Windows 7 Windows 8 is my main OS (ew).

  So I downloaded all the necessary for the Windows 7 operating system drivers and all works... but my wireless.
  I'm running the 64-bit 7 model. I cannot driver wireless for work or 'install' a lot of help would be appreciated!

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3141&DwnldID=23491&ProductFamily=wire...

  try these driver wifi on your windows 7, worked for me win7 home Prem z710

• Pavilion e015tx: hp Pavilion e015tx win 8 back issues wireless network adapter update

  "my laptop runs os win8, recently, when I had kept for update... it restarted the installation of updates but could not download and update driver wireless button ' and 'Media Tek Ralink RT3290 802.11bgn Wi - Fi adapter WLAN'... Since then impossible to connect to wireless networks... Please help me to solve the problem...

  do I need to manually install the drivers?   If Yes please let me know... thanku in advance

  Hello @praveen99,

  Welcome to the HP Forums!

  I understand that the WiFi no longer works on your HP Pavilion e015tx 15. I want to help you solve this problem.

  Please start by a hard reset. After that, follow the steps in this troubleshooting wireless document:

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  You can also try rolling back the drivers.

  1. Press Win + r keys

  2. Type "devmgmt.msc" and then click on 'OK '.

  3. click on the 'View' tab, then 'show hidden devices '.

  4. scroll and select the option "network adapters."

  5. right click on the RT3290 Wi - Fi adapter, and then select "Properties".

  6. choose the tab "driver".

  7. click on "Roll Back Driver".

  Thanks, I look forward to the results!

• A6000 - anyone with a load of a6000, communication, customer service issue?

  My a6000 bought late in October 2015. There are a few bodies around and several batteries so the port micro-USB or cord used maybe 3 or 4 times. The kit was removed for the second time since my purchase when planning for a period of time. A small software update was in order. The unit would not connect to what anyone, nor make light for the load of come on.

  It was decided that I would contact the support of text that I couldn't use the phone. They were unable to process my application for a new cord of text / live chat. Am online somewhere else for telephone conversations with support to acquire a micro usb cable. My mind began to stir as if all goes well, we could imagine.

  During the convesation with telephone support I clearly state, that the question does not need to support the problem is isolated as I have several Sony products. Please, just send a micro USB cord the cord has been used only a few times and none no longer works. Then I heard, "which is not covered by the warranty." This is the case. (Laugh while wondering where a missing Sony since I bought my first Walkman) Everything in the kit is covered (the fact is in black and white) as time passes and then told me to prove when I bought the camera. My immediate exclamation has been that it has been made a month before I bought it (keep in mind this salesperson already knows my family name and that the product is registered and where it was purchased)

  Now here we have that I am connected to a database of the conversation disappointed by Sony. I am told that I will get my cord once they get a copy of the invoice. (the product is Sony - the serial number must be placed on the record of the manufacturing date) I can't wait to see how, "send me yours and I'll send you my own experience will.»

  I'll keep this simple it seems that I'm dragged in the mud to replace a defective micro USB cord? Of course, which is the backbone of the loading unit and communication (if you're a basic user)? Sony expressly warns not to implement a cord that is not come with the kit so why the first question of the customer service would be, "have you tried another cord after I carefully explained other cords are not recommended.

  Still awaiting a response to an email sent to the customer service almost 2 days ago...

  My last post was filed in a compromised box of a language that I don't speak...

  It could get better and better. Stay tuned.

  AWAKENING OF SONY

  The cable works.

• Issues wireless HP 7525 - increased from WEP to WPA2

  Hello all - I installed my wireless security to WEP to WPA2, and I can't print on it.

  I tramped through the wireless configuration the 7525 and the Setup seems to have worked.

  I printed out the results of the wireless network Test and everything's fine, no errors on the print.

  Can I print using the USB cable.

  I'm not sure it's material, but I also started to use OpenDNS and made this change at the same time.  I don't think it would make a difference, but I am mentioning just in case.

  Unfortunately I can't print wireless, I received the error message "cannot communicate".

  Any help?

  Thank you.

  Not a matter of WPA2.  DNS?  Go back into the router and reset it on your default values supplied by your ISP.

  Say, download and run printing HP and Scan doctor, what - what?

  Download it here: HP Print and Scan Doctor

• [Issue] Wireless: HP 1102w driver update for Lion

  Hello

  I am currently using a USB cable to connect to my HP 1102w to print my papers. Everything worked in Snow Leopard, but when I updated to Lion. I can't use the wireless function and I do not see my network wireless printers, I guess it's problem of compatibility of lead with Lion.

  Advisor.

  Hello

  A pilot of fully compatible Lion was released several weeks ago.

  First of all, download and install the latest version of the software:

  http://FTP.HP.com/pub/softlib/software12/COL32564/bi-80684-6/LJP1100_P1560_P1600_Full_Solution.dmg

  Then you can follow the fourth step in the document below to reconfigure the wireless connection:

  http://support.HP.com/us-en/document/c02020336

• Customer service - issue with forms authentication

  Hello

  I activated and the value of service to customers for the comment box...

  After the connection to the network of comments, I see a login form. When I set login username, password and click on guests, I see only the photo below. In the Active Sessions of comments I Don t see any session active, and internet access is not allowed. Do you have any advice how to fix this?

  

  Model:

  NSA 2600

  Firmware version:

  SonicOS Enhanced 6.2.5.1 - 26n

  I changed the settings on the screen below and is now the work of search service.