Similar Questions

• VS web cache WCCP service numbers

  Hello

  I'm working on configuring WCCP for our LAN and I wonder if there are any differences in features between the use of 'ip wccp web cache' or 'ip wccp [number] "?

  (The plan is to have caching devices and using the WCCP, web traffic would be picked up and sent to the caching engines).

  Thank you for your time.

  Hi Martin,

  The WCCP service numbers are characterised by TCP port numbers, in the case of the web cache wccp, this will redirect all traffic to TCP port 80 of routers to Cisco Cache/CNSE devices.  Other third party WCCP clients will use wccp custom number (90-97), some of the groups most common wccp service are shown below:

  Name of the service	Service number	Protocol	Port	Priority
  Web cache	0	TCP	80	240
  DNS	53	UDP	53	202
  FTP-native	60	TCP		200
  promiscuity of TCP	61	TCP	*	34
  promiscuity of TCP	62	TCP	*	34
  HTTPS-cache	70	TCP	443	231
  RTSP	80	TCP	554	200
  WMT	81	TCP	1755	201
  MMSU	82	UDP	1755	201
  RTSPU	83	UDP	5005	201
  CIFS-cache	89	TCP	139, 445	224
  custom	90			220
  custom	91			221
  custom	92			222
  custom	93			223
  custom	94			224
  custom	95			225
  custom	96			226
  custom	97			227
  custom-web-cache	98	TCP	80	230
  reverse proxy	99	TCP	80	235

  Concerning

  Rubens

• Service levels

  Hi all

  Just when I thought that I had worked on Service levels...

  I tried the following two provisions separately within Service Builder:

  Service Service [Global] [Global]

  Service Cluster Cluster Service [Global] [Local]

  node1a                                                                 node1a

  node1b                                                                 node1b

  host2                                                                      host2

  host3                                                                      host3

  The color coding is quite simply for the sake of description and show different levels of services.

  • [Global] service is all 'container' for the hosts contained in the service and overall.
  • host2 and host3 are hosts of autonomous - if two of them have a fatal alarm, which affects the service so the number of SLA fall of 100%.
  • Cluster service is the 'container' for the two-node cluster and is at the same level as host2 and host3.  I tried both a local and a global service for this service.
  • node1a and node1b is a two-node cluster - if one of these nodes has a fatal alarm, this should not affect the number of ALS as the other node is still ongoing.  I have created a registry setting in FSMServiceSLP_PercentageAvailableThreshold for Service Cluster [Global] against the value of 50, as well as Service of Cluster [Local] FSMService against FSMChildService of a value of 50, the logic being that 50% of guests at the service (i.e. a server) is always available, the availability of the service is not affected.

  My understanding is that availability of service numbers are inherited "upwards".  In other words, if I create a fatal alert on node1a, what should happen is that Cluster Service remains at 100% (there are still 50% of the available servers node1b still works, that's why the service is not affected) and Global Service remains at 100%.

  However, what seems to happen in practice, it is that the Cluster Service remains at 100%, but the Global Service begins to drop his SLA figure, showing a loss of service.  This is the case without worrying if the Cluster Service is defined as a local or a global service.  This can be confirmed by visiting the dashboard of Service for the Cluster Service and Service levels although there is a fatal alarm for node1a.

  Is it possible for the figure of service level should be given exactly?  In other words, the Service should remain 100% unless that be host2 and host3 or (node1a and node1b) are not available?

  It comes to vFoglight PRO 6.7.1 build 5.6.4.2.  I built the services in the usual way, the option «Foglight can automatically add hosts...» "is not selected and the level is set to the default"let Foglight decide. "

  Thank you

  Brian

  Well, we have this finally solved - Foglight does not calculate the availability of level of service properly, at least not in the way we have been lead to believe.  To summarize...

  If the function is defined as follows:

  [Global] service

  [Global] Cluster service

  node1a

  node1b

  host2

  host3

  If node1a has a fatal alarm, Service [Global] Cluster is not affected (which is OK because it has a value of registry FSMServiceSLP_PercentageAvailableThreshold of 50), but [Global] Service starts to drop (which shouldn't happen).  This is because the level of service availability calculation is also global alarms that would also alarms the child objects.  To work around this, change the level of availability of underlying service code.

  Go to Administration | Data | Manage the derived parameters and filter availability:

  

  Select the metric range derived from FSMServiceLevelPolicy: sourceIds = $null by clicking on availability:

  

  Select the calculations derived metric by clicking on FSMServiceLevelPolicy: sourceIds = $null:

  

  Replace the existing code in the code Expression box in the attachment, and then click Save.  This operation takes you to the screen change the derived metric.  You need to click on save here too, otherwise your code will not change.

  When you install your services, you can use global services to allow you to reuse the service in other parts of your service structure, however, when you set the percentages in the Variable of registry FSMServiceSLP_PercentageAvailableThreshold, these values are set against the topology of FSMServiceLevelPolicy Type:

  

  Once all this is done, the availability of level of Service for the [Global] is displayed and calculated correctly.

  My thanks to Philipp von dem Bussche-Hünnefeld from Dell to provide the code and help and especially for allowing me to share with the communities.

  Brian

  Warning: a full assessment has not been made to see if there is an impact on the other customer on the SLA management scenarios, so use this code at your own risk.

  Additional accessories:

  • availabilityCalculation.txt.zip

• Unexpected error

  I'm trying to set up my printer in the eprintcenter.com.  I tried to enter the code that has been just printede an hour ago both my iPhone and my computer.  I get "unexpected error."

  I wanted to just one person talk to him live but the HP Customer Service numbers came in white.  Frustrated.

  Daun Kruszynski

  Hi Duan,

  If this is a newly created product code and all the error messages are produced around the same time, it might be useful just wait a bit and try again.  Sometimes there may be excessive traffic or back-end server issues that find fast enough.  I give him a little time and try again before calling support.

  Kind regards

  Ron

• DSC: Connection to the 3rd party OPC Server

  I had this work with LabVIEW 2011 and Win XP...  After update I can't make it work...   Now with LabVIEW 2012 and Win 7, the server is now upgraded to Win 7 system.

  I'm reading a commercial server OPC of Yokogawa variables.  I can connect to the server.  I can see the variables and create a related shared variable.  But when I access the variable fails.

  Dave,

  My problem is very basic.  Go to the administrator in the 'control panel' the instructions say.  It does not exist in Windows 7.  I'm stuck.  Here is the complete procedure as given by the very useful Dylan Caswell.

  Here are the instructions for Windows 7 (I'll put this on the forum so that others can see or change the KB if it works)

  1. press on the Start button and Type: Component Services
  2. click on "Component Services" under programs
  3. in the left Section of "Component Services" expand: ' Component Services > computers > my computer > DCOM Config.

  
  4. search for the name of your OPC Server (in your case should be in the sense of: "Yokogawa Exaopc Data Access Server")
  4A (not sure if this is necessary, but I also repeated for the other server "Yokogawa Exaopc data access server OPC Link1")
  5. right click and select properties of your OPC Server

  6. click on the identity of the Properties window tab
  7. Select "interactive user."
  8. click OK, and then restart the computer

  This does not solve the problem, so I went to the second stage.

  If this does not work, let's try the other method, as described in the KB but for Windows 7:

  1. press on the Start button and Type: Services
  2. Select 'Services' under programs
  3. in the right part of the window, sort by name by clicking on the 'Name' column, and then select: NEITHER engine Variable
  4. right click NI Variable engine and go to properties
  5. Select the log tab, click this account:
  6. Select an account that is an administrator
  7. Select OK and restart the computer.

  There is a 'right click' option to stop and start the service.  I don't reboot but simply stopped the service, numbered 5 and restarted the service.

  Immediately my VI running began to show valid numbers!

• Unable to connect to the internet after the removal of system tool virus

  A computer running Windows XP Media Center Edition Version 2002, Service Pack 3 has got a virus System Tool which I believe I deleted using the key of activation and then run Malwarebytes' Anti-Malware.  On reboot, the system tool icon was still in the system tray, so I ran Norton 360 to remove unwanted registry files.  He got rid of the icon in the system tray.  I also then removed the Malwarebytes software.  Please note that, while I was removing the virus, I was able to connect to AOL so that in mode safe mode with networking.  Finally, who has stopped working.  The Malwarebytes software has been downloaded on the infected computer with a flash drive from a computer with working internet.

  I cannot now connect to the internet with Internet Explorer 8 or AOL (under standard or secure modes).  When you are trying to connect with IE8, the message reads 'Internet Explorer cannot display the web page' and when I run the diagnostic tests, it indicates there is a problem with the modem and/or router.  These devices are, however, both the work that there are other computers connected to them and they work.

  I tried Microsoft solutions are answers to a similar question.  Unfortunately, none of them worked in my situation.  They have been in accordance with the following:

  No doubt...

  What happens when you try to connect to the Internet?

  What is your version of XP, the version of Service Pack and IE?

  What method did you relieve your system of affection 'Antivir Solution Pro' (how confident you are that you got rid of him)?

  Generally, any part of this procedure is necessary after removing Antivir Solution Pro (a well documented removal procedure would have included the steps to cancel Internet connectivity issues).  I would get my infected system and try the procedure you used to see how it works.

  If, when you try to connect with Internet Explorer, you see something like:

  Internet Explorer cannot display this webpage
    
  The most likely causes:
  You are not connected to the Internet.
  The Web site encounters problems.
  There could be a typing error in the address.

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your Internet disabled in certain situations.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to start the network settings of Internet control panel applet properties, connections.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically

  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Also, I typed cmd in the start run box and the command-line entered ipconfig enough and ipconfig/renew.  This is also not rectify the situation.

  For your assistance, the following is a copy of a part of the file that I thought that may be applicable after that I typed in miscinfo32 in start, run box:

  Summary of the system:

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  System FIELD name
  System manufacturer Dell Inc.
  Dimension of the model 8400 system
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz
  A04 BIOS Version/Date Dell Inc., 10/01/2005
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  CHAMP\steve user name
  Eastern Daylight Time zone
  Total physical memory 1 024,00 MB
  Available physical memory 534,65 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Swap file space 2.40 GB
  Paging file C:\pagefile.sys

  Network card:

  Name [00000001] Broadcom NetXtreme 57xx Gigabit Controller
  Adapter Type Ethernet 802.3
  Product Type Broadcom NetXtreme 57xx Gigabit Controller
  Installed Yes
  ID of device PNP PCI\VEN_14E4 & DEV_1677 & SUBSYS_01771028 & REV_01\4 & 1D7EFF9E & 0 & 00E0
  Last reset 23/03/2011 14:51
  Index 1
  B57w2k service name
  IP 192.168.1.102
  IP 255.255.255.0 subnet
  Gateway IP 192.168.1.1
  Active Yes DHCP
  192.168.1.1 DHCP server
  DHCP lease expires on 2011-03-24 15:22
  DHCP lease obtained 23/03/2011-15:22
  MAC address 00:11:11:CB:96:8 D
  0xDCFF0000-0xDCFFFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\b57xp32.sys (7.73.0.0 built by: WinDDK, 181,75 KB (186 112 bytes), 1980-01-01 01:00)
   
  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 23/03/2011 14:51
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
   
  Name [00000003] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 3
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:11:11:CB:96:8 D
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
   
  Name [00000004] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 4
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 10/08/2004-07:00)
   
  Name [00000005] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 5
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 10/08/2004-07:00)
   
  Name [00000006] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 6
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 10/08/2004-07:00)
   
  Name [00000007] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 7
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 10/08/2004-07:00)
   
  Name [00000008] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  8 index
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 10/08/2004-07:00)
   
  Name [00000009] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 23/03/2011 14:51
  Index 9
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  16:4 MAC address: 20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
   
  Network adapter 1394 name [00000010]
  Adapter Type Ethernet 802.3
  Product Type 1394 network adapter
  Installed Yes
  V1394\NIC1394\9103858423C01 PNP device ID
  Last reset 23/03/2011 14:51
  Index 10
  Service name NIC1394
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 52:df:35:27:59:E5
  Pilot c:\windows\system32\drivers\nic1394.sys (5.1.2600.5512 (xpsp.080413 - 0852), 60,38 KB (61 824 bytes), 10/08/2004-07:00)
   
  Name [00000011] Miniport Wan WAN (ATW)
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (ATW)
  Installed Yes
  ROOT\NET\0000 PNP device ID
  Last reset 23/03/2011 14:51
  11 index
  WANATW service name
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00:03: 8A: 00:00:15 of MAC address
  Driver c:\windows\system32\drivers\wanatw4.sys (8.3.0.0, 32,80 KB (33 588 bytes), 2005-02-23 22:12)
   
  Name [00000012] Symantec Network Security Miniport
  Adapter Type Ethernet 802.3
  Type of product Symantec Network Security Miniport
  Installed Yes
  ROOT\SYMC_SYMIMMP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  12 index
  Service name SymIMMP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:11:11:CB:96:8 D
  Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)
   
  Name [00000013] Symantec Network Security Miniport
  Adapter Type Ethernet 802.3
  Type of product Symantec Network Security Miniport
  Installed Yes
  ROOT\SYMC_SYMIMMP\0001 PNP device ID
  Last reset 23/03/2011 14:51
  13 index
  Service name SymIMMP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  16:4 MAC address: 20:52:41:53
  Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)

  Network Protocol:

  Name MSAFD Tcpip [TCP/IP]
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 16 bytes
  Message size maximum 0 bytes
  Message Oriented No.
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports shipped data Yes
  Supports graceful closing Yes
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  Name MSAFD Tcpip [UDP/IP]
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 16 bytes
  63,93 Message size maximum KB (65 467 bytes)
  Message Oriented Yes
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast Yes
   
  Name RSVP UDP Service provider
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 16 bytes
  63,93 Message size maximum KB (65 467 bytes)
  Message Oriented Yes
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption Yes
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast Yes
   
  Name RSVP TCP Service provider
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 16 bytes
  Message size maximum 0 bytes
  Message Oriented No.
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption Yes
  Supports shipped data Yes
  Supports graceful closing Yes
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] SEQPACKET NetBIOS name 3
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] DATAGRAM 3 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2}] SEQPACKET NetBIOS name 0
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2]} 0 DATAGRAM NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] SEQPACKET NetBIOS name 1
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] DATAGRAM 1 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2}] SEQPACKET NetBIOS name 2
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2]} 2 DATAGRAM NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] SEQPACKET NetBIOS name 4
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] DATAGRAM 4 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] SEQPACKET NetBIOS name 5
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] DATAGRAM 5 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.

  WinSock network:

  File c:\windows\system32\winsock.dll
  Size of 2.80 KB (2 864 bytes)
  Version 3.10
   
  File c:\windows\system32\wsock32.dll
  Size 22,00 KB (22 528 bytes)
  Version 5.1.2600.5512 (xpsp.080413 - 0852)

  Summary of Internet Explorer:

  Version 8.0.6001.18702
  Build 86001
  Ask the path C:\Program may Explorer
  English (United States)
  Active printer Dell AIO Printer A920, winspool, Ne04:
   
  Level of 128-bit encryption
  Disabled Access Manager
  IEAK install not

  Internet Explorer Versions of files:

  Actxprxy.dll 6.0.2900.5512 96 KB 2008-04-13 20:11:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Advpack.dll 8.0.6001.18702 126KO 08/03/2009 04:32:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Asctrls.ocx 6.0.2900.5512 112KO 2008-04-13 20:08:58 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  browselc.dll 6.0.2900.5512 62KO 2008-04-13 13:03:24 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Browseui.dll 6.0.2900.5512 KB 1 001 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  cdfview.dll 6.0.2900.5512 148 KB 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Comctl32.dll 5.82.2900.6028 603 KB 2010-08-23 12:12:04 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Dxtrans.dll 8.0.6001.18702 211KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Dxtmsft.dll 8.0.6001.18702 340KO 08/03/2009 04:31:44 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  iecont.dll not available not available not available not available
  iecontlc.dll not available not available not available not available
  Iedkcs32.dll 18.0.6001.18968 379 KB 10/09/2010 01:58:03 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Iepeers.dll 8.0.6001.18968 180KO 09-10-2010 01:58:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Iesetup.dll 8.0.6001.18702 70 KB 08/03/2009 04:32:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  ieuinit.inf not available 56 KB 2009-06-29 04:40:16 unavailable C:\WINDOWS\SYSTEM32
  Iexplore.exe 8.0.6001.18702 624KO 08/03/2009 14:09:26 C:\Program may Explorer Microsoft Corporation
  imgutil.dll 8.0.6001.18702 34KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inetcpl.cpl 8.0.6001.18968 1 435 KB 10/09/2010 01:58:06 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inetcplc.dll 6.0.2600.0 108KO 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inseng.dll 8.0.6001.18702 93KO 08/03/2009 04:32:46 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  MLang.dll 6.0.2900.5512 573 KB 2008-04-13 20:11:57 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  MSENCODE.dll 2000.7.25.0 KB 92 10/08/2004 07:00 not available C:\WINDOWS\SYSTEM32
  Mshta.exe 8.0.6001.18702 45KO 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtml.dll 8.0.6001.18975 5 818 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtml.tlb 8.0.6001.18702 1 601 KB 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtmled.dll 8.0.6001.18972 65KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  mshtmler.dll 8.0.6001.18702 47KO 08/03/2009 04:31:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Msident.dll 6.0.2900.5512 51KO 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Msidntld.dll 6.0.2600.0 15 KB 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  msieftp.dll 6.0.2900.5512 243 KB 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  msrating.dll 8.0.6001.18702 189KO 08/03/2009 04:34:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  mstime.dll 8.0.6001.18968 598KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Occache.dll 8.0.6001.18968 202KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  proctexe.ocx 6.3.2900.5512 80 KB 2008-04-13 20:10:35 C:\WINDOWS\SYSTEM32 Intel Corporation
  sendmail.dll 6.0.2900.5512 54 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shdoclc.dll 6.0.2900.5512 537KO 2008-04-13 13:03:19 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shdocvw.dll 6.0.2900.5512 1 464 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shfolder.dll 6.0.2900.5512 25KO 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shlwapi.dll 6.0.2900.5912 463ko 08/12/2009 05:23:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  TDC.ocx 8.0.6001.18702 65KO 08/03/2009 04:30:56 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  URL.dll 8.0.6001.18702 104KO 08/03/2009 04:34:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Urlmon.dll 8.0.6001.18968 1 183 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Webcheck.dll 8.0.6001.18702 231KO 08/03/2009 04:34:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  WinInet.dll 8.0.6001.18968 895 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation

  Internet Explorer connectivity:

  Dial connection preference never
   
  LAN settings
   
  AutoConfigProxy wininet.dll
  AutoProxyDetectMode disabled
  AutoConfigURL
  Proxy disabled
  ProxyServer
  ProxyOverride
   
  America Online
   
  AutoProxyDetectMode disabled
  AutoConfigURL
  Proxy disabled
  ProxyServer
  ProxyOverride
  Internet programs to use connection not available
   
  Maximum attempts 10
  Waiting between retries 5 sec
  Disconnect idle 20 min time
  Autodisconnect disabled
   
  Modem Intel(r) 537EP V9x DF PCI Modem
  Remote access PPP server
   
  Connect to the network
  Enable Software Compression Yes
  Would require no encrypted password
  Require no data encryption
   
  TCP/IP network protocols
   
  Use server assigned IP address Yes
  The 0.0.0.0 IP address
  Use server assigned NameServer Yes
  Primary addresses DNS name server: 0.0.0.0
  Secondary DNS: 0.0.0.0
  Primary WINS: 0.0.0.0
  Secondary WINS: 0.0.0.0
   
  Use the Compression header IP Yes
  Use the default gateway Yes
   
  Name of the script file

  You have any ideas that could help me find an internet connection?  Thanks for any help.

  The removal of the virus seems to have taken some required system files.  See if the System File Checker helps.  Click Start > run and enter in the field open.

  sfc/scannow

  Press ENTER.  The System File Checker must detect the missing necessary files and put back them.  If this does not work, use a system restore point from before you were infected.  If this does not work, get out of your XP installation diskettes.

• U350 locked

  Hello.

  I am a COMPUTER technician, based in the United Kingdom. A potential customer brought me their IdeaPad U350 (model 2963), which they cannot start.

  Investigation has shown that there is a BIOS and HD password game. They are adamant that they do not have these themselves, which I'm not entirely convinced by.

  I myself convinced that they are original buyers of the machine and established that the warranty on this mchine expired in December 2010.

  I tried the password for Phoenix BIOS scripts that have served me in the past, but have concluded that Lenovo use bespoke hash encryption.

  I removed the HARD drive and tried to access it from OS X and Linux, nothing done.

  There is no data that is irreplaceable on the machine. Wish of my client is that he is restored to the State of the plant.

  I see no way to reset the CMOS, I need to access the BIOS. Probably a non encrypted HDD will work in this machine, but my client then you need to buy a new copy of Windows. I really just wish access the partition recovery and restoration.

  Is there a way I can fix this?

  Thanks for your suggestions.

  Darren Peace

  Hungerford, UK

  ' afternoon, Darren

  Welcome to the community!

  Sorry, you have any questions.

  about the hard drive password, there is no way to access that provide the password... nothing. If this cannot be accomplished, the drive is useless.

  about the bios password, you will need to contact Lenovo to discuss your options, which may include the need to replace the planar.

  Sorry, I know this isn't what you want to hear.

  edit: in case you don't already have it, here is the link to the service numbers: http://support.lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

• Converting sales letter

  Oracle has secret service numbers in letters?

  For instane:

  1 > has

  2 > B

  3 > C

  ...

  J > 10

  ...

  Yes: TRANSLATE()

  SELECT TRANSLATE(my_number,'1234567890','ABCDEFGHIJ')

  FROM my_table

• Question of replacement for keyboard r61e

  I wanted to replace my keyboard US English language with Japanese language.

  I know how disconect the keyboard

  There were also 3 service numbers listed

  ALPS = 42T 3235

  Chicony = 42T 3299

  NMB = 42 3169 T.

  I don't know where one would need or how I would order it

  Thank you

  number of http://www-307.ibm.com/pc/support/site.wss/MIGR-68174.html

  Welcome to the forum!

  As a general rule, NMB is preferred by most users, followed in the Alps. You can throw the FRU part number in a Google search or eBay, and you're going to get zillions of hits...

  I hope this helps.

• Why if I pay every month with my VISA card I can't use the program? Said THAT THE TRIAL has EXPIRED? and I pay every month!

  Por that TR pago my a my con mi tarjeta VISA no puedo use el programa?  Me as EL PERIODO DE PRUEBA HA CADUCADO?

  Why if I pay every month with my VISA card I can't use the program? Said THAT THE TRIAL has EXPIRED? and I pay every month!

  Telefono del servicio customer service numbers support Adobe tecnica in todo el mundo y

  País/región	Attention to the client
  Norteamérica
  EE. UU. There Canada	800-443-8158.
  Europa
  Austria	6950071855 3 option
  BELGICA	027 119 960 3 option
  Dinamarca	+ 45 38 322 914 option 3
  Irlanda	+ 353 (0) 1 242 1552 option 3
  Finlandia	+ 358 (0) 969 379 671 option 3
  Francia	01 71 23 01 96 option 3
  Alemania	6950071855 3 option
  Italia	02 6 968 2817 option 3
  Countries Bajos	+ 31 (0) 20 201 3331 option 3
  Noruega	+ 47 23 16 28 81 option 3
  España	900 810339 option 3
  Suecia	+ 46 (0) 858 536 692 option 3
  Suiza	18009581 3 option
  RU	+ 44 (0) 207 365 0733 option 3
  Asia/Pacífico
  Australia	1800 614 863
  China	58657700 010
  Hong Kong	30714922
  India	0124 4003810

  
  000 800 440 1751 Indonesia 001 803 447 361 on 03-5350-0407 Corea 02 563 2555 Malasia 1 300-80-0027 Nueva Zelanda 0 800 485 948 Filipinas 180014410440 Singapur 800-448-1642 Taiwan 0800-666-536 Tailandia 001 800 441 8813 Otro + 632 636 8450 Latinoamerica Argentina 0 800 444 0290 Brasil 0800 8921704 El Caribe 206-675-6100 Central America 206-675-6100 Chile 1230-020-0109
  206-675-6100 Colombia 01 800 5 1 80102
  206-675-6100 Costa Rica 0 800 011 0910
  206-675-6100 Mexico City 001 800 249 1039
  206-675-6100 Sudamérica 206-675-6100 Venezuela 206-675-6100 Africa South Africa + 44 (0) 20 7365 0733

• Lenovo E420 battery problems

  Hello

  For Lennovo E420 2 a few weeks ago, I bought one for me and one for my wife.

  After 2 battery cycles I met 2 problems with my laptop, which is more powerful than my wife.

  1st: ThinkVantage Toolbox notified me that: 'your battery does not cool. Replace your battery now to stay mobile.

  Indeed my battery life expectancy was reduced to 7 hours on a full charge to 2 hours.

  2nd: my laptop is overheating to fast even when I do nothing on it. My wifes laptop with some open applications such as Chrome, Outlook and Word open is overheating at all even after 2 hours of work.

  If someone met with same questions and how solve you.

  I called the support center and they sugested do a gauge reset battery, which I do now.

  fausto1234,

  Sorry, you have problems with these units.  Can you send me a private message (small MP envelope at the top of the forum) with your contact information, the type of model, serial number and set at least one of the units and the cases of service numbers you have where it is in for repair and now on parts.

  We can increase this to provide the alternative resolution - we would like to restore your satisfaction.

  Thanks for talking, and I apologize again for the trouble.

  Mark

• Sharing service does not work in Pages, Keynote, Numbers, Photos and calendar

  Among the interesting features that I used for a while is the ability for a large number of Apple applications, such as Pages, Numbers, Keynote, and Photos to share content using the "Send a copy" feature (Pages, Numbers, Keynote) or 'Share' (Photos). Unfortunately, these sharing services are no longer works for me in any application, and they have not been for several weeks.

  So what happens is, for example, when I'm in Pages and I select 'Share' icon in the menu bar and then "send a copy" and I select "Mail" (or all the options on the list besides), it gives me a dialogue window asking me the format I would like to share (Pages PDF file, Word Doc etc.). When I choose an option, a process that happens in the background that is supposed to send the file to Mail, open a new message, and then add the file as an attachment. However, in my case, the process seems to get stuck somewhere because the Mail opens not with a new message, but Pages continues to think that he is trying to send the file via mail because all options of sharing are grayed out. So that I can continue to work on the document, the sharing feature is no longer available and that I must leave the Pages and then relaunch the application. This same behavior happens in Numbers and Keynote trying to share a document, and this regardless of the application that I'm trying to share it with.

  This type of thing happens in the pictures when I select a photo and try and hand using Mail, except in the case of Photos, I can't continue to use the application and I need to force quit and raise in order to work again the application.

  Another note, which I think is related, is that when I get an email in Mail that has a calendar attachment (file here) and I double-click the attachment file, it will open the calendar but the new event may not be listed or available to add. I enter the information manually.

  In troubleshooting, I rebooted the computer several times and I have also checked my preferences, extensions and to my knowledge, I don't have any installed third-party extensions (there is no third party extension that appear under the option 'All' on the left side). Short to wipe my hard drive, and then reinstall the operating system and all my applications, I don't know where to look to try to solve this problem. Also, I can't identify any specific event (installation of the software, updated software, etc.) that causes this problem to occur. I also tried to connect to a guest on my computer user account, but the same issues were present in the user account guest that I described above, leading me to believe that it is not a question of corruption within my user account, but rather an entire system.

  Mac Pro 6.1

  3.5 GHz 6-core intel CPU Xenon E5

  OS X v 10.11.2

  64 GB OF RAM

  Pages v5.6.1

  Keynote v6.6.1

  3.6.1 Numbers

  Photos v1.3

  Digital camera RAW 6.18

  Digital Camera Support RAW 6180

  Quit all applications. Check system preferences: Extension Panel: Menu share the missing part: send a copy the submenu items. If they are present, in order to check them, and then re - they will appear in the submenu of the previous. You may need to restart after selecting them.  If they are missing completely, then it is very likely that your launch Services database is corrupted. There is a difficulty.

  Others have encountered this problem, and what follows has helped many to restore the sharing: send a copy the submenu items. In the Dock, click on Launchpad: other: Terminal. Triple-click to select and then copy and paste the following in your open Terminal window. It will probably just run and finish, but if not, press return. There is no way out of this activity. When you get a new Terminal prompt, just left Terminal. Reset.

  /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -seed -domain local -domain system -domain user
  

• Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team at the 800 448 custom

  Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team customer to 800 448 1642 for assistance. my credit card is already loaded, but not received numbers.please series suggest

  Hi Kunal,

  If the problem still persists, can you please contact the support for this issue through https://helpx.adobe.com/support.html#/top_products.

  Please do not hesitate to me message in person if assistance is needed.

  Concerning

  Stéphane

• Figure numbers not in service - cannot be changed

  Hello

  I use FrameMaker 9 in Windows XP Professional, Version 2002, Service Pack 2.

  I inherited a FM document in the form of instructions that accompanies the third party technology that my company farmed.

  When I opened this document (built in FM 8), numbers (format X - X) have been completely out of use.

  Figures 5-1 to 5-4 are in order, but then the following figure shows the Figure 5-1, followed by the Figure 5-6, followed by the Figure 5-5.

  I'm not a user of FrameMaker itself; I'm more at home with PageMaker and InDesign, but it is a tool of choice for this document and I'm stuck with it.

  How can I get the numbers in the right order? Be clear and precise; I am not versed in lexicon FM. Thank you for your attention.

  -WPH

  The entries that you look in the document itself, or they are in a file separated as a list of numbers generated?

  If you speak a separate file of the list of Figures, out of sequence entries are almost always caused by some of the titles figure (but not all) being located inside a table or an anchored frame.

  The entries out of the sequence is because the chassis built lists in a certain predefined sequence: it looks at the flow of the main text of the document first, then looks at the text inside tables, then looks like the text in anchor text blocks (I may last two out of sequence, but in any case it is the reason).

  If it's the digit real numbering in the chapters, the problem is probably due to a problem with the installation of the chapter numbering. Place the cursor in the paragraph tag Figure. Open the paragraph Designer (use Ctrl-m), then look at the Dial tab which is the 4th icon from the left.  What is listed for the building blocks of automatic numbering?

  Sheila

• Help with the service of Skype numbers!

  So far, Support of Skype in Twitter acknowledged my request for help. And Skype Forum Administrators are too fast by removing the images they feel reveal content staff.

  It's now 28 hours since I've paid for my Skype number. The site says that it is active. But with the help of customers of Skype, my Skype number is not active.

  I use Skype since 2005. Now, I need to know what happened to the $18 I paid for the renewal of my Skype number. Help me anyone in Skype? Or I'll be ignored because my images are deleted.

  All I ask, "why does my Skype number display"non-active"after I paid for that on the web?" -It's a SIMPLE QUESTION.

  OK, I tweeted using Skype in Twitter. No response. I wrote this problem in the community forums of Skype, my image has been deleted, and I received a warning. What should I do now?

  Active Skype user since 2005. Advocate for Skype for PSP.
  Using Skype on PSP Go, my | phone A818 Duo (Android Gingerbread), Xubuntu Linux.
  SkypeIn user since July 2009.

  KuyaMarc wrote:

  
  

  What should I do now?

  Hello
  It is a peer-to-peer Forum. Your matter resolved please contact Skype here: contact customer service

  For your protection, all identifiable personal information is deleted because it is a public website.

  Thank you.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.