Setting stage adapter

Similar Questions

• Set adapter LabVIEW auto detect programmatically

  Hello

  I can programmatically set the adapter of LabVIEW 2011 RTE inTestStand using this expression:

  RunState.Engine.GetAdapterByKeyName ("G VI Flexible adapter"). AsLabVIEWAdapter.SetServerInfo (LabVIEWServer_RTEServer, "C:\\Program Files (x 86) \\National Run-Time\\2011\\lvrt.dll" ")

  I want to set the adapter to 'Auto Detect VI version' instead. Someone know a solution to this

  Thank you

  BR

  Mogens

  Try this:

  RunState.Engine.GetAdapterByKeyName ("G VI Flexible adapter"). AsLabVIEWAdapter.SetServerInfo (LabVIEWServer_RTEServer, "AutoDetect")

  I used the GetServerInfo method with mine the autodetect value and that's what he returned.

  Hope that helps,

• Adaptive resolution slow update

  Recently, we set up a monstrous studio by BOXX workstation. Everything works great but there is a update slow and response in the viewer of the effects after when moving a camera or rub through a scene. Lite scenes have no problem... but slightly more heavy scenes bog down strongly. I have a system of lesser more kid at home, but with similar specs that can rub through the same scene as if it were on a first timeline with large adaptive updates for the Preview Panel. The scene consists of 7-8 still images of 5K resolution cutting staggered in Z space for the movement of the camera gives some parallax. I tried the following to fix it with nothing does not:

  -Tried Off (full quality), adaptive, wired and Fast Draw. Quick draw helps of course, but the home system it is always ahead on the ground full Adaptive resolution. 1/8, 1/4, etc. all tried as well as increase the amount of memory texture of 1600 to 4500.

  -Viewer quality at all zoom and color settings.

  - And disables rendering MP. Core seems to be slightly more sensitive. There are 40 hearts on this system and I tried many combinations of carrots. The kernels more it seems slower. Also almost impossible to restore all the carrots without rendering of image sequences. In addition, takes to always these hearts of preparation and make really.

  -On and without disk cache

  -Cache layer on and outside

  -Video cards may not be present natively in the... tried put Raytracer both activation and deactivation of GPU support unsupported.

  -J' tried even adding my video cards supported in the raytrace text file list. This seems to have accelerated the response bit for sure but still no match for the system at home.

  The system specifications are as follows:

  Windows 7 Pro 64-bit

  Double Xeaon 2687W v3 (3.10 - 3.5 Ghz 40 hearts)

  128 GB of RAM

  2 x 500 GB SSD in RAID 1 for the boot drive

  1x800GB SSD for Adobe Cache

  3xTITAN Black Editions with 6 GB of ram each.

  Matrix SAN fiber 18 to RAID 50 for the media running to the writing of the 900MBs and 1, 650MBs reading

  System at home that has no problem with the same project overview:

  Windows 7 Pro 64-bit

  Double Xeaon 2687W v1 (32 cores to 3.10 - 3.4 Ghz)

  32 GB of RAM

  1x250GB SSD for the boot drive

  1x250GB SSD for Adobe Cache

  3 x 680 GTs with 4 GB ram each.

  Read table SAS internal 8 TB RAID 5 for the media running at 600MBs and 800MBs writing

  This machine cost installation quite part of change and should break through adaptive updates and previews in After Effects. The fact that a slightly less system can rub across the stage as if it was a video file is completely confused and indicates that there is a problem.

  One strange thing I noticed is Fast Preview of the icon home machine turned blue, although he is set to Adaptive resolution, where systems studio icon is gray until fact update, then it turns blue. The timeline instantly also has a green bar on at the opening of the computer on the home machine but it does not on the studio machine. (as there is no keyframe fair layers in 3D space and I move the camera in z space to check their distances).

  Any ideas on the issue? Is it possible the Black TITAN three video cards are not officially taken in charge and optimized so my problem of preview? Or is it something deeper? Thank you.

  Discovered the problem! C’était l’effet de bord flou freaking de plugins Suite Keying de géante rouge. The version on the home system was older of two versions. I uninstalled the latest version of the Studio work station and installed the old version and BAM... butter previews! So ridiculous. Duly noted... stay two versions of back in the Red Giant plugins.

• M70: WiFi adapter does not connect to the wifi Lan

  Hello
  I have the Satellite M70-122 with an Intel PRO set wireless adapter 2200BG Driver version 9.0.2.25. ConfigFree radar screen correctly identifies the wifi router of my Motorola, but when I click on and get the router on the icon of the laptop, no connection is established and there is a message that says:
  "Sell another application is controlling the wireless card."

  I disabled the "use Windows to configure my wireless" box under settings to connect wireless but no luck.

  In addition, there is no wifi adapter icon in the status bar, or I can get to a window with the settings of the adapter to enter the SSID and WEP details.

  Any help will be appreciated.

  Hello

  Have you used a tool of connectivity like Atheros WLan client utility?
  On WEP:
  PC card encryption is hardware specific. Maybe if it of not possible to use WEP encryption, because the card doesn t that supports.

  Please also see this page:
  http://support.Intel.com/support/wireless/WLAN/pro2200bg/index.htm

  Good bye

• Disappeared from my wireless adapter

  IT all started when during a week I have to troubleshoot my internet to run whenever my laptop went to sleep (he gave a message saying my wireless adapter (I think) was not lit and I would do the repairs and it would work) but after this week it stopped connecting to wifi at all or never detect it. So, I decided to hook my laptop to my router via an ethernet port and it worked for about 10 minutes then came back offline. So I disconnected my cable and connected to wifi fine. But the next day it wouldn't connect to the internet or via the ethernet cable. Now, there is no adapter listed and I can't set the adapter setting to it shows empty. I did a full scan of my HD and it's always gone and now, I don't have any of my files or anything that is unnecessary. Difficulty?

  Laptop is a

  Aspire M5-481PT-6819

  Hello

  First load the default settings in the bios utility:

  1. Start the laptop
  2. Press [F2] when you see the Acer logo
  3. Press [F9] load default settings
  4. Press [F10] to Save and exit
  5. The laptop restarts automatically

• ActiveX control in CVI Edit substep

  I'm under CVI 2010 (10.0.1.419) and TestStand 2010 SP1 f1 (4.5.1.144).

  I came across a problem today and I know that I must be missing something easy. I am trying to create a step with a stage to change type. The lower level change called a CVI function to its module code. The CVI function opened a panel that contains an ActiveX control.

  When I try to use the lower level edit (by clicking the button in an instance of the step type), I got an error that the DLL cannot be loaded. Changing the setting of adapter CVI to run the steps in an external Instance of CVI let me see that ICB receives an ERROR of EXECUTION NO DEADLY that 'ActiveX controls cannot be created in a thread which the concurrency model is apartment multithreaded (MTA).

  I know that Edit substeps are supposed to use STA threads (there is a post of Doug somewhere around here... ah, here). So I did not know what went wrong. I created the simplest example I could think of nothing else than a control IE WebBrowser on a Panel in a .uir and still have the same error.

  More strange is that I got the error When you run one of the TestStand examples! I tried the example \Examples\StepTypes\CVI\HP34401a and got the same error:

  NON-FATAL RUN-TIME ERROR:   "c:\...\StepTypes\CVI\HP34401a\HP34401aStepType.c", line 356, col 5, thread id 0x00001694:   Library function error (return value == -176 [0xffffff50]). ActiveX controls cannot be created in a thread whose concurrency model is multithread apartment (MTA)
  

  There must be something I am doing wrong, or an option that is out of order. Any ideas?

  -J

  Change substeps are executed in a threaded so executed in the process. If you are running in an external CVI, then you will get a MTA thread. You probably don't want generally be run some edit sub-steps in a CVI outside themselves, that is why there is a checkbox "Always run in the process" on the CVI module specification table (I recommend to all developers step using CVI modules for substeps type use this setting for all of their sub-stages). Your original question was probably unrelated to the COM threading model I recommend that you debug and debug the process of with CVI seqedit.exe rather than your modules running in an external CVI.

  Hope this helps,

  -Doug

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• On-line discharge battery (model A30 - 514)

  I have problems with my A30-514. Even when the power supply is connected and the notetop seems to be running of AC power, the battery discharging itself and finally the power level is so low that the laptop stops.

  It seems that the laptop is controlled by battery power not HQ. I currently use the laptop without the battery inserted - i.e. on AC only, and it is absolutely perfect.

  I'm no longer under warranty so please don't suggest just going to a service partner!

  Do I need a new battery? Or is it a hardware fault?

  Thank you very much.

  Hi rich,

  I have a similar problem with my A30-141. I found through experimentation that this situation arises because of a temporary interruption of power to the adapter. In my case, the interruption is caused by a loose fitting located at the rear of the laptop taken.

  The effect is to cause the power system switch to the battery, even if the network is connected (and shows the LED at the front of the laptop). The only way I can fix it is to reboot the laptop.

  I have now set the adapter cord to the back of the laptop to prevent any movement of the power supply in its decision-making.

  HTH

• Home adsl wireless gateway

  Hi, can not configure the gateway wireless with my laptop.do I still need to connect my modam? or is the internet connection is not necessary? have tried both ways yet not work.have tried typing http;//192.168.1.1 in my web browser comes up with cannot find server? all lights work on front door except the internet connection. set up adapter works ok.please help-cheers rick.

  Hello

  As far as I know the IP address must be set to automatically get an IP address in the TCP/IP properties.
  Also check if the options use Windows to configure my wireless network is selected in the properties of the wireless network.

  Best regards

• How to disassemble the Camileo S10?

  I would like to hack the S10 to solve 2 problems:

  (1) put an adapter wide angle
  In fact, it is almost impossible, but to remove the plastic part in front of the goal allows access to the cylindrical part of it and to set an adapter wide angle

  (2) I need hold the S10 on a RC model to keep the device horizontal rather than vertical.

  With success, I start to disassemble the unit, remove the black plastic middle where the battery.
  I stop because I have no ideas how to disassemble the video screen

  Any person a link to Toshiba Service manual of the Camileo S10 or have an idea how to prove it?

  Hello

  I think is not so easy to disassemble a TV and must be carried out by an expert.

  If something is wrong with your camera, you should go to the authorized service provider nearest. Technicians can disassemble for you and they have these service manuals I think.

• HP110-210: intermittent loss of signal

  Constantly, I lose my signal (wired) internet. The average loss time is around 9-10 seconds, then resumes signal and continues on the site, I asked.  I have a router TP-Link AC1750 which I contacted and after a week of troubleshooting, they determined that this isn't their router. Likewise, they went through all my setting the adapter too.  I have PC(HP also) then one more and there is no problem of the internet. If you look at the pic below () screen, I loose connection can it resume. I have the latest drivers. I tried to reverse the ports of the router and change the cables... Any thoughts?

  I was told by support for the operating system is corrupt and they will send me a new OS. It's to bad I have to pay for it, because the computer is 12 days old only... but that's what it is, I guess.

• Bug Fixed-point in LabView?

  Hello

  I am currently working on a project in LabView and met FPGA something weird that looks like a bug, but it could also just be me not well understand how fixed-point numbers are supposed to work. I work in LabView 2010 Pro (32-bit 10.0f2) on Win 7 Ent. 64 bit.

  The problem I have is that when I try to add some numbers together I get unexpected answers, which obviously makes the code very unreliable.

  For example: If you try to add 0.50002 with - 0.49998, you expect something around zero, but instead, you get like 3.99999... Am I missing something here? I saw this on several numbers around zero. Fixed points do not work around zero?

  I should add that I just tried it on the local computer and not on the FPGA, but I don't see that would make a difference. The two entries are updated to 'Adapt to the entered data' and the output is "Adapt to the source", the Add function is also set to "Adapt to the source" and I tried the envelope and saturate... I also tried with fixed bits rather than adapt to the data entered on the inputs etc with no luck.

  Can anyone shred some light on this please? Is it just me or is it really a bug or just as fixed-point numbers are supposed to work?

  Thank you!

  / Joel

  It is not a bug.  If you develop the indicator displays the result, you will see that there is an exponent of-5 at the end (e-5 = 10 ^-5).    So that is to say the answer is 4 * 10 ^-5 or 0.00004, which is pretty close to 0.

  

• GeForce GTX 980 TI

  Aspire Acer Predator 605 G3

  GPU: GeForce GTX 980

  CPU: Intel Core i5-4590 CPU @ 3.30 GHz

  Memory: 12,00 GB of RAM (11.92 GB usable)

  Current resolution: 1920 x 1080, 30 Hz

  Driver version: 353.30

  Operating system: Microsoft Windows 8.1 Pro

  I'm sure it's a 500 + power supply that exists in the required power supply for a Geforce GTX 980 TI would be a more than 600 or 650 +, but after doing some reading, the statement was made when it was said...

  then I went out and bought a power supply 650 and the Ti-980. It turns out that this Acer pc uses some stupid 12 pins that doesn't use any other pc.

  I assume that the connector is used to SUPPLY rather than the GPU, so be it we have a PSU that fits directly in that I can use a GTX GPU 980?

  Hello Durand1981,

  So here, the background comes down to this: use Gateway (now owned by Acer) connectors owners 12v for their motherboards. This connector is unique to their products and creating a very difficult environment for those who choose to upgrade their PSUS.

  However, despite the difficulty of work around the exclusive wiring, there is a solution to this. It comes in the form of a DYI rewiring to set an adapter to make a 24 pins ON the connector that is compatible with the 12v rail. You can follow the instructions here if you want to explore this option.

  I personally recommend getting a new motherboard to complete your new GPU to make sure that no problem of compatibility - Although this might cancel your license OEM Windows OS. It is the easiest, although the most expensive solution, but it also provides an extra layer, ensuring that your system is ready for future upgrades and downtime than this mobo owner + PSU combo almost forbidden.

• Manage a large number of SPAx102s

  That service providers use to manage a large number of 2102 s or 3102 s?  How the firmware versions are controlled and held?  What configuration management & password?

  Thank you!

  Hello

  as called "configuration" is used for this. SPA-xxxx devices has ability to remote download (http and tftp) settings on regular basis, looking for changes, deploy the settings file and restart. The file is loaded based on the MAC address of the device, so all devices really does it's own file.

  Provisioning can set the adapter password and can also rule of the wire for the FW update when needed, and SP-xxxx adapter will check the header of the FW file and so more recent (or better different) that running into the adapter, it will download the FW, flasher the FW on the idle time and restart.

• Dell XPS 13 flickering screen

  Hi, I've had my laptop for a few days now and I've noticed a few problems with the screen. It still flashes so slightly at random. Sounds like the screen slightly wearing off random times and is quite noticeable. It happens more when the captain is not plugged. I contacted technical support without help on the issue at all. The room sensor is off, as is the room sensor the worst I have ever dealt. The brightness is at 100%. The screen seems not bright enough at the same time. Any ideas? I reinstalled windows 8 two times already and still the same problem.

  UPDATE *.

  The user that says change the setting "Enable adaptive brightness" to OFF, is good for some people. This will work for some.

  IF this does not work... the ONLY solution I found, dealing with this during more than a year, is to change the projector and back to the LCD screen output. That ALWAYS works for me; However, once you restart, sometimes, it will return to the light but by changing Adaptive brightness allow OFF, the duality of these operations seem to be a sufficient remedy.

  Press Fn button, and then press F1, four times until the output of the projector setting is selected, then let go. The screen will turn black, of course, because the laptop think you use a projector. Then, simply press ENTER, and it will return to the LCD screen. The flicker should have disappeared... until, perhaps after a reboot.

  SO, this is very frustrating since this is supposed to be their flagship mobile product.

  I hope this helps.