How to set up the second hard drive

My Mac Pro has two, the hard drives of 1 TB.  I had originally planned on the use of the second hard drive for Time Machine.  However, instead of using Time Machine, I now save by cloning my first hard drive to an external hard drive using Carbon Copy Cloner.  I did not use Time Machine in a year and do not expect that I have to use more.

My first hard drive fills up-I have about 150 GB unused on it, and with video editing I'm is squeezed.  What is the best way to configure my system so that I can use my second, now sleeping, hard drive? Is it possible of them gang up together so that my system will behave as if there is a 2 TB HDD?

Thanks in advance.

Yes. It is called RAID.

For more information on how to do this, see https://www.tekrevue.com/tip/create-raid-el-capitan/

Tags: Mac

Similar Questions

  • Setting up the second hard drive preinstalled

    I have a Pavilion m9250f equipped of Windows Vista 64-bit with two 500 GB hard drives.  The first hard disk is almost at capacity (available 15%), and I want to know how to set up the second disc for use.

    Hello

    The SATA controller mode setting is in the bios. F10 will get you into the bios. Back up your data before attempting to make any changes.  If you use the RAID mode then then you will need to enter the Intel RAID CTRL + I utility at startup to disable the parring.  RAID 1 is extra protection in case you have a hard drive failure.  If you disable the RAID 1 parring so be sure to perform backups at a frequency you can live if you experience a hard drive failure.  When the RAID 1 parring is disabled, then the second hard drive will be available for data storage (more than 500GB).  If get you there, then you can do a quick format on the second hard drive.  Now you should be able to move the folders you want to the second hard drive.

  • Satellite P70 - how to use the second HARD drive?

    I have recently bought a satellite P70 - A - 10 d.

    I see that there is no second location on hard disk, so I can install a second disk.
    You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

    But I can't understand how screed the disc.
    Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

    Hello

    If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

    Welcome them

  • How to use the second HARD drive of Satellite A210 - BP1 for mirroring

    Satellite A210-BP1 came with 2 HDD (160 GB).
    Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
    This should be done without supervision and in real time - as a RAID 1.

    How can I do this?
    I also have Vista professional available and I would be willing to use 3rd party software as well.

    Thanks in advance for your answers.

    Hi Jan

    I doubt that this is possible
    Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
    Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

    Therefore, the final answer is; NO, it is not possible to use mirroring

    Concerning

  • How to install the second hard drive in the Satellite A200-1 of body weight?

    I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

    What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
    Thank you
    Steve

    Hello

    I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

    But this does not mean that each A200 can be improved for the second HARD drive.

  • HP dv7 will not recognize the second hard drive

    My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

    Main hard drive is a 1 to install a second hard drive to 500 GB.

    Hello

    Try the following.

    Judgment of the laptop and unplug the 2nd HARD drive.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    When windows has reloaded, download and reinstall the Chipset driver at the following link.

    Chipset Driver - Windows 7.

    When this is finished, stop the laptop.

    Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

    Kind regards

    DP - K

  • How can I add a second hard drive for my dv7-3060us?

    I am very short of space on my originally installed HP 500 GB hard drive and need more storage space. I have a new Seagate 750 GB drive, 7200 RPM and I would like to install it. When I opened the folder to access the second hard drive compartment, I was blocked when I have not found any pre-installed connector. What should I do to install this player?

    Thank you!

    Hello

    Loss of power for 40mins. Please try this:

    http://PartSurfer.HP.com/search.aspx?SearchText=605415-001

    the links before shows the TWO caddy and cable for dv7 machines.  This article may help:

    http://thessd.com/2012/02/how-to-add-a-2nd-HDD-or-SSD-to-an-HP-Pavilion-dv7-laptop/

    Kind regards.

  • Add the second hard drive

    I replaced a faulty computer with a second hand replacement. Both are programmed with XP and the same browser. I installed the HDD in the position of the Tower slave, plugged the cable and Ribbon secondary and put power cord.  The computer does not recognize the additional hardware. Y at - it an easy way to simple transfer of data to the new hard drive, or is there a way to access the second hard disk drive so I can use the computer program?

    I replaced a faulty computer with a second hand replacement. Both are programmed with XP and the same browser. I installed the HDD in the position of the Tower slave, plugged the cable and Ribbon secondary and put power cord.  The computer does not recognize the additional hardware. Y at - it an easy way to simple transfer of data to the new hard drive, or is there a way to access the second hard disk drive so I can use the computer program?

    You have misused terminology in this issue, so it's a little difficult to determine what your problem may be caused.

    What do you mean by "the computer does not recognize the additional hardware?  Only shows drive in disk management (start > run > diskmgmt.msc > OK)?  If the player appears in disk management, but not in my computer, you may need to use disk management to assign a drive letter.

    It seems that if you want to take the faulty computer hard drive (in condition, of course, was not the hard drive itself which was defective) and put it in another computer.

    There is no such thing as a "slave of the Tower position."  Likely, you just put the old drive into an available drive Bay.

    Generally, the 'secondary' water is used for optical drives - not a second hard drive.  Usually, if there is only one hard drive, it is connected to the connector at the end of the water and the second hard drive is connected via the connector in the middle of the cable.  The cable connected to the primary IDE connector on the motherboard should be a 80 wire cable, while the other may be a 40 wire cable:http://www.mikeshardware.com/howtos/howto_connect_ide_hd.html

    When you have 2 drives connected on the same cable 80 wire, one is the 'master' (the one linked at the end of the cable) and the other is the "slave".  You specify the drive to this topic, what you are doing by correctly setting the jumper on the pins at the rear of the car.  You set the jumper on a 'master' and the other as 'slave' or two disks can be set for "Cable Select" If both support this and you have the special cable Select "Cable".

    However you connect, you must make sure that the drive of the old computer is defined as the slave drive, because you do NOT want to start from this installation of Windows.

    The foregoing assumes that both drives are the older IDE type of walk.  If one or both are SATA drives, it is quite something different.

  • Location for the second hard drive to 500-164 Pavilion

    Cannot find place to install the second hard drive in the box. Where it is installed?

    HP has not produced a manual upgrade. Please see this manual, because it could help you.

  • What do I need install the second hard drive HP PAVILION: p6633w

    What do I need install the second hard drive HP PAVILION: p6633w?

    donp815 wrote:

    What do I need install the second hard drive HP PAVILION: p6633w?

    Hello

    You need two cables, one is a sata cable:

    http://www.play.com/PC/PCs/4-/30305659/706331346/STARTech-com-6in-SATA-to-right-angle-SATA-serial-ATA-cable-female-SATA-female-SATA-6-inch-red/ListingDetails.html?_%24JA=TSID:13315% 7Ccat: 30305659% 7Cprd: 30305659 & kw = {keyword}

    This cable is only for data and connect the hard drive to the SATA connector on the motherboard.

    The other cable is energy:

    http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html

    It connects the hard drive to the PSU.

    You can also buy a combo like this cable:

    http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4

    All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)

  • Message need to get an administrator authority, during the passage of the second hard drive.

    Original title: pass to the second hard drive

    My computer has two hard drives of 500 GB.  One is almost full.  I want to start using the other hard drive, however when I tried my computer said that I need the authority of a Director and that I don't have that power.  I am the only administrator on the computer, so I don't understand why it says that.  In addition, as the original hard disk memory becomes more complete, my computer crashes more.

    Can anyone help?

    Hi ColMarriott,

    Using a hard drive internal or external?

    You can try the second formatting hard drive after taking a backup of the data on the disk.

    If you use an external hard drive, you can try the following steps.

    a. connect the external drive.

    b. find the external hard drive in windows Explorer

    c. right-click on the drive and select format.

    You can check the following items and check:

    Install or remove a hard drive

    Create and format a hard disk partition

    Important: Make sure that you have backed up all the data before going forward with the format.

    Since the first hard disk is full and crashing, you can try to move some data and check only files not programs drive different or another location.

    Hope this information is useful.

  • keep the second hard drive as duplicate in case of failure of the first disc

    I installed the second hard drive of the same size mfg and would not lead copy. Now I want to keep up-to-date with the first hard drive so that if the first drive fails, can I use the second drive until I get replacement for the failed drive. Never forget backups all have problems when you need them.

    You can not do it legally.

    Vista installation rules:

    A single license is a single Installation.

    This applies even on the same computer.

    See you soon.

    Mick Murphy - Microsoft partner

  • starting from the second hard drive to a dv7 6199sl

    Hello.

    I noticed that my dv7-6199sl space for a second hard drive. There is the caddy but not on cable. Before you buy the cable

    (I don't know where yet, maybe HP spare parts site) I need to know if it is possible to boot from the second hard drive with my laptop model. Thanks in advance.

    Best

    John

    Hi John,.

    My best guess would be that the USB 3.0 ports require a driver to work correctly, try to boot from it (when the driver is not loaded) may not work - this isn't a definitive answer, but I do not know of bootable recovery media certainly has problems booting from a 3.0.

    Regarding the wire to the second HDD, I would suggest sending a request thereon to HP to the Email address in the form below.

    http://h20141.www2.HP.com/hpparts/contact_us.aspx?mscssid=1DF92190D24F41BD8DFAF888728F5EBA

    Kind regards

    DP - K

  • Can I set up my HP dv7-4165dx to boot from the second hard drive?

    I got a HP dv7-4165dx for about 20 months now. Ten months in the original hard drive burned due to setting up directly under the GPU (lower left corner, to the left of the touchpad and under the keys), which gets quite hot on the top to make your uncomfortable hand. Symptoms include blue screens, troubled during start-ups, as well as a message from the system at boot that said the car was damaged. As it was under warranty, I brought it to Best Buy to get the drive replaced, which took about 2.5 months.

    Now, about 20 months, I face at the beginning of the exact same symptoms. I noticed that there was a second HDD Bay, away from the GPU, so I bought the yarn necessary to the use of this Bay. Now, he tells me that there is no installed boot drive (the hard drive test in the system diagnostics, knows that it is there). I'm sure that I can swap the drive towards the original Bay and be fine but that puts me $ 75 for the HP kit (Yes, I know I might have to eat that, if there is no way), but much more importantly, this means that I will have an another burned (losing everything, even once) by car a month or two.

    I looked, but I can't seem to find a way to tell it boot from that drive. Is it possible, or am I just out of the eye due to bad design? It has been a great machine, except for this problem.

    Hello

    Unfortunately there is no option to boot from the HARD drive in the 2nd Bay in one of the series dv7 - sorry for the bad news.

    Best regards

    DP - K

  • Satellite A350-122 - how to install the second HARD drive?

    Hello

    I'm a french owner of an A350-122 (serial no: 39169719K)

    In the french of the manual user, page 1-5, it is written that it is possible to insert another disc hard, and on page 2-6, the rear of the A350-122 view shows a second branch on the left for a second hard drive.

    So, I bought an SSD Intel X 25-M to put in the second location. I opened the second location and there is nothing: no sata, no power connector connector, only a location empty.

    So, what's the problem with this Satellite A350-122?

    Thank you for your response.

    Hey Buddy,

    I agree with the user above. Not all Satellite A350 models support a second HDD. The point is that laptops are country specific products and this feature is not available everywhere. In addition, all models A350 by using the same notebook case in order to have a crack but no connector.

    In any case, you can use t a second HDD. :(

Maybe you are looking for

  • Stuck on region 3 DVD

    A friend used by mobile phone and played sopme region 3 DVD. The DVD is now stuck on region 3. I live in Europe and cannot now play my European DVD. Can I reset the DVD firmware to allow me to return to region 2? DVD is SD-R2212.

  • Equium M50-192: battery issue

    Hello Basically, my problem is that whenever my laptop battery is in and I also have the AC too, the battery automatically takes over from HQ if the battery is flat. Ive had only the laptop about 2 months and it started only recently to happen. Alter

  • Pavilion 15: Where can I find my Windows license

    Hello, I have a really bad problem. It's not all about learn Windows license. OK, now read it carefully. (ENG) First, I searched many websites SteamOS and I learned how dual-boot with Windows. I did all the steps on my EXTERNAL hard drive. Installer

  • How do I cut internet at certain times on my nighthawk r7000

    How to cut internet at certain times. in the help box it says to go to the Advanced tab, but I don't have this tab my choices on the left side are home, internet, wificonnection, settings of the router, map network, parental control, readyshare, airp

  • Lost all desktop icons + my printer printing habit

    Original title: when the new modem has been installed to deal with the high speed upgrade by virgin media. Hi I lost all the desktop icons + my usual printer print despite it not specify that it is installed and has a green check mark it all happened