Several cards Bluetooth two Tecra M4

Similar Questions

• Share a single SIM card between two iPads.

  Share a single SIM card between two iPads.

  I want to get an iPad pro and already have an iPad 2 air. I want to be able to use my ATTdata package on both devices, if possible.

  Can I change the activated SIM card back on the fly between the two devices?

  Yes you can. Its quite possible the switch.

• Best graphics card for two monitors to Compaq Presario SR5610F

  I have a Compaq Presario SR5610F.  I want to upgrade the video card, so I can run two monitors.  What is the lowest card cost that is compatible with this machine?  The computer has the PCI Express Slot.  It has only a power of 250W.  There is a card that can be purchased to upgrade the memory of 256 MB card, run two monitors and I must not change the power supply?  I have a high-end gaming card.

  Thank you

  MJCSJC1

  Are what video connectors your monitors supported?  Most of the low-end cards have vga and DVI connectors, you should swing $30-$60.  If you are looking for dual DVI, nVidia has a 8600GT for around $100 but may need to get connector to power the card with your current diet.

• Is it possible to update the graphics card on a Tecra A8 (PTA38E)?

  The integrated Intel GMA 945 chipset on the Tecra A8 is not quite deal with the applications I put money. (3D games...)

  I know that laptops are severely restricted on space internally and that the purpose of the integrated chipset is to save energy, but is possible to install a graphics card only stand instead of using the integrated graphics card?

  If so, can you recommend a suitable graphics card and any company with the necessary expertise to install the card... (I guess this would be a bit beyond my abilities)

  I agree with the user above. Cannot remove the GPU like on the desktop PC.
  The chip is welded and mounted on the motherboard.

• Several similar Bluetooth devices

  Hi all

  I'm curious to know if anyone has an effective way to manage several bluetooth on their iPhone, particularly similar bluetooth devices.  Here's my scenario specific household:

  I have 3 Bose Soundwave mini in different areas around the House and bring with me to work, a living room stereo system using a logitech bluetooth receiver, stereo room bedroom using a similar receiver and a stereo in my backyard using the Roverbeats Unify bluetooth receiver and another in my garage with a similar Roverbeats receiver.

  Often with receivers, my phone will connect to a receiver in the other room, although it is literally in front of the receiver, I want to associate.  I'm so often or having to choose between keeping the receivers do not use unplugged, by selecting "forget connection" on my iPhone every time and just rematching.  With the mini Bose I have not found a way to rename each different unit which is confusing, as they are all labelled the same in my list of Bluetooth connections (I am able to rename every single unit on my Macbook, but that will still be often confused and have connection problems, making me forget all connections with all minis just reconnect from scratch).  I have every Mini labeled with A/B/C, but do not have a way to differentiate one on my iPhone.

  So, basically, I feel constantly forget liaison and/or keep some receivers unplugged.  Has anyone found any bluetooth utility function simplified to establish connections rename / prioritize?   I have an iPhone 5 9.3.2.

  The name change you make on your computer just the fact it not on the device BT itself. Because there is no user controllable files management, there is no similar to iOS functionality. I don't know of any utility that will help you. The only thing I could suggest is turn off BT devices and turning them on only when you will contact them.

• Card SDXC on Tecra M9

  Hello

  I have a Toshiba Tecra M9 with Windows 7 Enterprise (64-bit) on this subject.
  Can someone tell me if the SDXC cards will work on the SD Slot that is built in?

  Thank you

  I think that you are the first person with this issue.
  Let's see if someone here already has these cards.

  I don't even find the price for these cards.

  I'm sure that Toshiba does not test card reader with this card, but only with the cards mentioned in the user s manuals document if this will work it will be nice, if it isn't luck.

• Question about the specification of the two Tecra 8000

  I have 2 Tecra 8000 with the following specifications. :

  Intel Mobile Pentium II 400 MHz processor
  14.1 LCD
  256 MB PC66
  30 GB HARD DRIVE

  --------------

  Intel Xeon Pentium II 300 MHz
  13.3 LCD
  128 MB PC100
  30 GB HARD DRIVE

  My question is, who do you think is the better of the two? If the XEON processor is better, can I exchange the LCD monitors, replacing the with the 14.1 13.3.

  Thank you...

  Take the first and be happy ;)

• Bluetooth error - Tecra M2 - ACPI device driver

  I have a Tecra M2 with Bluetooth, which never worked. When you try to activate it returns the error "could not open bluetooth ACPI (tosrfec.sys) device driver.

  By clicking new connection "device is not ready" is the error message.

  Does anyone have ideas on this?

  Hello

  Before I give you an answer to your question I'll just give you a little advice. On the Toshiba page you can find a lot of very useful information on laptops and all problems that may occur.

  Please check on http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/heavy_duty_support.jsp?service=EU in the knowledge base and FAQ.

  There I found a page that can give you a proper answer. Please check on http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=96&service=EU&FID=tro000000189d.

  Good bye

• Error message with program battery bluetooth and tecra 9100 XP SP2

  When I try to start program battery bluetooth the following error message appears:
  the instruction at "0x1000bf18" uses the address "0x0015d000". memory don't pet not be "read".

  Is someone can tell me, what kind of question is this and how to fix it?

  Thank you very much in advance

  Hi Patrick,

  For the benefit of other users of the forum please let me translate your error message: -.

  ""The Instruction at "0x1000bf18" uses the memory address"0x0015d000". Cannot read memory.

  This indicates that the broadcast program has stored the second addresses two memory as a place in which it writes data and now cannot read the data at this location memory.

  It may be because some other routine wrote too much memory or reported to this place as "in use".

  Windows will normally prevent such a situation from occurring, but being Microsoft is not infallible and errors may occur from time to time.

  If you get this message every time that you start your battery Bluetooth, it is more likely to be a problem with the Bluetooth program badly to access its memory cache, so I recommend reinstalling the Bluetooth program.

  Good luck

  HTH

  Post edited by: NickyNoogle

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• Using ISA cards in the Tecra 8100/8200 docking station

  Is it possible to use old pc ISA cards in the PCI slots in the Tecra 8100 docking station?
  The Deskstation V Plus for the 8000 series seems to allow dual use in some of its slots so I wonder if it's the same for the 8100/8200 series.

  You can also the Tecra 8100 can be anchored to the Deskstation V to allow access to the ISA slots?

  Hello

  where did you get this with the AIS in the PCI slots? I've never seen a combo slot in my life so I can't believe :)
  But what about the v: Deskstation

  Yes, it can be anchored, it s integrates without problems, then you will be able to use the ISA-machines built slot.

  Welcome them

• Bluetooth on Tecra A3-108 problem

  Hi all

  I have Toshiba Tecra A8-103, and even 3 years, everything works fine. Operating system is Windows Vista 32 bit.

  Well, last week I have a problem with wireless / bluetooth switch.

  When I tried to use Bluetooth or wireless and set the switch on the laptop, the message saying "The Manager Bluetooth stopped working" came on my screen.

  When I went to: Control Panel-> administrative tools->-> Windows logs, event viewer
  I got the following error:

  "Application TosBtMng.exe, version 7.1.0.3, time stamp 0x4b84ce69, module LCWizard.dll, version 6.3.0.1, time stamp 0x4a0c0228, exception code 0xc0000005, offset error 0x000064db, 0xc78, failed failed start time 0x01cb06e234f12608 application process id."

  Well, in the last days I read on the Internet that many people has the same problem, tried reinstalling the driver, then downloaded new drivers from Toshiba site, but the problem remains.

  laptop is still just as security for 5 days, I called the service. They told me to make a backup of all the data to bring the laptop servise and leave it there. They format the hard drive and reinstall windows again. They have 30 days to try to fix it...
  Well... I can't stay without laptop not 1 day, due to, all my tools software development on this laptop. And can't yet think about the waste of time, to reinstall all the software I have on computers again.

  And... I would first try to fix myself.

  Is there a solution?

  Thanks in advance

  Hello

  > Is there a solution?

  The best way to know if it's a hardware problem or software/operating system is to restore the factory settings. If the recovery procedure doesn't fix it, it means a malfunction of the equipment.

• How to use the SDIO CARD Bluetooth PA3271U

  I BOUGHT A TOSIBA BLUETOOTH SDIO CARD BUT DON'T HAVE ANY INFO ON THE USE OF DISC AND NO MANUALS OR DRIVERS. can not FIND any WHAT ON THE INTERNET NIETHER.

  Any ONE HELP please.

  First, you must install the last battery Bluetooth which you can download from the Web of Toshiba Bluetooth site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php
  Now, it depends on what OS MS that you use. Very old notebook can also require an update of the SD Host driver. You can download it from the above URL.
  Read the details of this file for further instructions how to upgrade the driver with XP SP2 if you use this operating system.
  Toshiba announced Vista drivers for the card of SDBT2 with the next version. Therefore, wait a bit if you intend to use it in Vista.

  [Edited by: admin]

  [Edited by: admin]

• Several cards PCI-MIO-16-4 in a PC

  Hello

  I have two systems on the same SCXI, using a card PCI-MIO-16-4 to control instruments in a chassis.  Currently, I am working on the new software to combine these two systems in one, but without any hardware revisions.  Because of the distance between the two chassis, I don't have the ability to chain the.  Is it possible to use both PCI-MIO-16-4 cards in a PC at the same time?  Thank you very much for your help!

  -Eric

  Hi Eric,.

  Assuming that you have available PCI slots in your computer, you can use two cards PCI-MIO-16-4 in a computer simulatneously.

  -Jake B.

• Delays in DAQmxWriteRaw when you use several cards PXI-6733

  Application:
  I have an application that generates and writes the analog data at 300 kHz slightly underneath.  Data generation and output take place every 14 ms (we'll call it who a 'block',) through an event EveryNSamples leave a timing sheet.  In each block, 4000 samples of analog data are generated and output to 6 of the 8 channels of analog output of the PXI-6733.  The output buffer is set to twice the block 4000 writing samples and pre-filled with 4000 zeros, so the output is always a block behind the data generated.  If a single block exceeds 14ms to generate and write on the analog samples, the output buffer will be against the wall and exit stop (regeneration is disabled.)  I recently needed to add more than 10 output channels, so I installed a second PXI-6733 map in the chassis and set up a second analog output task to write the second map.

  Problem:
  As analog data are generated on demand in each block of 14 ms, the program cannot take more than 14ms to generate the data and write them on the cards, otherwise we will underflow analog output.  Thus, any unwanted delay must be avoided.  Data generation stage does not take very long (in my test it is off and decision< 1ms,)="" but="" i'm="" seeing="" some="" problems="" when="" i="" write="" the="" data="" to="" the="" pxi="" cards. ="" i'm="" using="" the="" daqmxwriteraw="" function="" to="" write="" the="" samples="" to="" the="" cards. ="" the="" function="" is="" being="" called="" twice="" every="" update="" loop:="" once="" for="" each="" output="" task="" (card). ="" when="" i="" added="" the="" second="" card,="" i="" noticed="" that="" occasionally="" the="" call="" to="" daqmxwriteraw="" would="" take="" much="" longer="" than="" 14ms,="" causing="" buffer="" underrun="" errors="" (-200016)="" on="" the="" second="" card,="" or="" regeneration="" errors="" (-200290)="" on="" the="" first="" card. ="" i="" inserted="" timing="" markers="" around="" each="" call="" to="" daqmxwriteraw,="" and="" i="" see="" that="" normally="" the="" calls="" each="" take="" around="" 4.8e-5="" seconds="" to="" complete="" on="" card="" 1="" (whether="" alone="" or="" in="" conjunction="" with="" card="" 2). ="" on="" card="" 2,="" the="" calls="" take="" usually="" take="" about="" 4.8e-5="" seconds="" to="" complete,="" but="" they="" occasionally="" spike="" to="" between="" 5="" and="" 40ms="" (e.g.="" 6="" out="" of="" 300="">

  I wonder what would cause these erratic spikes in time it takes to DAQmxWriteRaw BIE called on the second card.  Is there a known issue with the help of 2 PXI - 6733 s in the same PXI chassis?  Could there be some sort of conflict of resources (not enough channels DMA, etc?)  The two report cards they have in DMA mode, and fill FIFO priority is set to NotEmpty.  The problem also occurs when the transfer mechanism is set to interruptions.

  Other Observations:
  I noticed the first edge of calendar corresponds to the point in the program to the location of loading the dll "nicesru.dll."  I can't find any information that features in this dll, and I don't know if it's a symptom or a cause.

  I also noticed that when an error occurs, I can't seem to stop and clear the tasks of production.  After trying to stop it and cancel all active jobs, keeps blinking the link on the PXI chassis light.  To reset, the only way is to go into solution of measurement and Automation Explorer and reset the second card 6733 manually (or use ResetDevice C calling).  There seems to be only the second PXI-6733, and it also happens when using the test panels in the MAX program.

  Material:
  PXI chassis, 1033
  1 x card synchronization PXI-6608
  2 PXI-6733 analog output cards x
  1 x card PXI-8461 CAN
  PXI, PCIe - 8361 I / map F

  Dell Precision T7600
  E5-2687W CPU Xeon

  Software:
  Windows XP SP3 32-bit
  NOR-DAQmx 9.0.2
  Visual Studio 2008 sp1

  I was able to solve the problem by moving the PCIe card in the PC to another location.  I assumed the problem was with how bus PCIe are managed by the motherboard, or how the resources have been allocated to the cards in this particular niche.  Move the map on the slot 16 second x on the motherboard seems to have solved my schedule delays.