Several short pictures with multiple static IP addresses

Similar Questions

• Name resolution fails when you are using multiple static IP addresses

  When multiple static IP addresses are set on my single Ethernet adapter, name resolution fails most of the time in both directions. It sometimes works, but this seems like only I can when he in thing to go back to the IP address of a specific subnet (changing the order of the IP addresses in the config?).

  Settings IPv4 of the Ethernet adapter (which I will refer to PC - 1, Win8) are generally the following:
  IP: 192.168.15.180/24
  IP: 192.168.1.254/24
  IP: 169.254.1.1/16
  Gateway: 192.168.15.1

  Check name resolution from another PC (which I will refer to PC - 2, Win7) on the 192.168.15.0 subnet via ping returns often to the other two survey periods. PC - 2 IPv4 settings are:
  IP: 192.168.15.182/24
  Gateway: 192.168.15.1

  PC - 2:
  c:\>ping PC-1
  Ping PC-1 [192.168.1.254] with 32 bytes of data:
  Request Timed Out

  The outcome here is, of course, the PC-1 sees a query of a computer name on 192.168.15.0 subnet and it returns the IP address for this subnet.

  In addition, and more to my main problem, PC - 1 does not return an IP address for our servers local (I'll call Server-1), returns the following error.
  c:\>Ping Server-1
  Ping request could not find host Server-1. Please check the name and try again.
  Ping the IP address directly works without problem.

  The two problems are solved when the two 169.254.0.0 192.168.1.0 and subnet subnet are removed from the PC-1, leaving only the statically assigned subnet 192.168.15.0. The issue can be reproduced on 2 PC (Win7) as well by assigning similar static IP.

  Does anyone have a suggestion or two to try?

  Hello
   
  The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.
   
  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads
   
  For any information related to Windows, feel free to get back to us. We will be happy to help you.

• RV220W - rules of access/redirection of port with multiple WAN IP addresses

  I just installed a Cisco RV220W - that works very well for outbound traffic, however for incoming it seems unable to work with multiple WAN IP addresses.

  We have a block of 6 WAN IPs assigned to us by our ISP, and I want to use each of them to expose certain ports on our servers to the outside world.

  I tried to do with rules (by using HTTP, for example) with the following parameters:

  Connection type: Inbound (WAN (Internet) > LAN (local area network))

  Action: Always leave

  Service: HTTP

  Source IP: Unique address

  Start:

  Send to the Server Local (DNAT IP):

  Use other WAN (Internet) IP address: disabled

  Status: Activated

  However, the port of the inaccessible Server/rest.

  I tried:

  • Restart the server with power power off again
  • implement the same port forwarding settings
  • triple-checking all the IP addresses used

  The only way that I have working is by changing the access rule so that it applies to any specific source rather than to another address... but this isn't a solution for us because we need to use specific IP addresses to the internal servers/ports specific.

  The interface of the router admin certainly suggests that this should be possible, but using it seems to break all incoming access!

  Any suggestion is welcome.

  You must use "ANY" as the source IP address, you publish your internal server to the internet and the internet means that the request comes from any source IP address (you don't know what it is, so that's all.

  Basically, you want any source IP to hit one of your WAN IP on port 80, and then your firewall will redirect the request to the internal private IP address of the server on the same port 80. And when the answer comes back internal server, the firewall will already have this translate entry in and reverse NAT won't happen (you must configure it, the default firewall function).

  I hope that I have answered your question.

  Please mark as correct, if you like the answer.

  Thank you

• Cisco SRP 521W with multiple WAN IP addresses

  Hi all

  I have an unusual scenario that may require the use of a SRP 521W-, the scenario is as follows:

  Temporary installation:

  • Cisco 857 ADSL router until the Ethernet Hand-off is installed
  • Several IPS delivered on the ADSL WAN service
  • Cisco 857 in Bridge Mode and connected to the WAN - SRP 521W port
  • Cisco 521W manages authentication and routing
  • Check Point Firewall system connected to SRP 521W LAN-1
  • Check Point Firewall has IP WAN 203.XXX.XXX.XXX
  • Cisco UC-540W connected to SRP 521W LAN-2
  • Cisco UC-540W has 203.XX WAN IP. XX. XX

  If you understand the situation described above, I'm curious to know if this is possible and if so how? I need a totally separate networks and the only thing they have in common is the Cisco SRP 521W.

  It is also worth noting that the SRP 521W is used because the ADSL service is only temporary, while the fiber build is complete and the carrier provides an Ethernet Hand-Off, then Internet service will change to this type of presentation and the ADSL router will be relegated in the dark loneliness world.

  I went through the router and have been playing around with the settings, the problem is that I have nothing in LABORATORY work more that can I would like to reproduce this environment and test it before deployment... SO I hope someone can help to shed light on this case in order to reduce the amount of trail and error, I have to meet to operate.

  For any help or suggestion is appreciated.

  See you soon,.

  David.

  Hi David,

  Is your PC provides you with all the public addresses within the same subnet?  that is the WAN IP of the router is part of the same subnet as the address 203.x.x.x?  Or well, is separately assigned WAN address?

  If the addresses are all part of the same subnet, I fear the SRP520 will not support what you are trying to do - this product does not support the concept of a single address on the WAN port forwarding/DMZ use.

  If the sunet inside is routed via the WAN address, then it should be possible to turn NAT and attack the VLAN local accordingly.

  PS: The SRP541 host multiple WAN addresses for port forwarding/DMZ.

  Kind regards

  Andy

• X 2000 and multiple static IP addresses

  Hello

  I have a X 2000 router which is connected to a DSL cable.

  My DSL contract have 16 static IP addresses.

  In order to make this work I had to choose PPPoA with my user name and password.

  The router automatically got my IP address and I can go on the internet.

  Now, I need to map one of my other IP addresses to a server inside my local network.

  How can I do a NAT between (for example) port 80 on my another static IP address to one of my LAN IP?

  Thank you

  Max

  The X 2000 is a consumer. It supports only a single public IP address.

• "Error: failed to get the IP address of the destination virtual machine running the converter to assistance server." with a static IP address

  Hi all

  I'm trying to p2v linux 6.4. It fails with the following message is displayed:

  Error: Cannot get the IP address of the virtual destination machine running the converter assistance server.

  I have seen discussions on this message, but they all refer to dynamic IP address, taken from DHCP, as in my case, I use static IP address.

  In the meantime the p2v (which then breaks down...) I open console support machine and saw a message:

  
  

  eth0 is not a recognized interface.

  Can someone tell me what is happening?

  Hello

  I assume you are using converter 5.5. There is a new feature that allows the selection of the network card. However, it works well in the case of Linux P2V. If you have changed the type of adapter, use 'e1000' or 'auto' and try again.

  HTH

  Plamen

• One of the virtual machine gets the APIPA address after you have configured with a static IP address, where the other VMS works very well with same vlan with static IP

  We have deployed 3 VMs with the same vlan where one virtual machine gets APIPA address, even after the configuration of the IP address manually.

  We do not have servers DHCP and other VMs 2 find with the same vlan

  No IP address is not used by another system and another IP address works

  Meanwhile, I just googled and got a God save the link that helped me in the question of fixing

  http://lyngtinh.blogspot.in/2011/12/how-to-disable-Autoconfiguration-IPv4.html

• Create the virtual computer with a static MAC address

  Hi all

  Im trying to create a virtual machine with PowerCLi but im failing to connect New - VM with an addapter network?

  I know that you can create new network addapter with:

  New-card network -MacAddress 00:50:56:bb:00:13 -Type e1000 -NetworkName ' Vlan 6 Virtual Machine '

  But this will create just a network card on the server im related to the use

  to connect-viserver

  New-VM

  -Name VMSTORE23 -$vmhost $esxhost -data store $datastore DiskMB - 20000 MemoryMB - 2019 -NumCpu 2

  I think that the cdmlet that I need to use is OScustomizationSpec - but like I said im strugling to connect?

  Someone at - it ideas.

  Thanks in advance for your help.

  Eddie

  You're almost there, the MAC address must be specified as a string, enclose it.

  New machine virtual- - name VMSTORE23 - $vmhost $esxhost - $datastore - DiskMB 20000 - MemoryMB 2048 Datastore - NumCpu 2 - NetworkName "Vlan 6 Machine virtual network | Get-NetworkAdapter | Set-NetworkAdapter -Type Vmxnet3 -MacAddress "00:50:56:bb:00:2 b" - confirm: $false

  I added the - confirm the setting, as it will not request the change.

• With the help of several conditional tags with multiple outputs of WebHelp

  I have a project that I created for a web application. Within the web application, there are 3 types of customers (business Accts, Accts National and level 1 clients).

  I added each help topic associated with the help topics that I created.

  Then, I created 3 outputs of webhelp and 3 Table of contents for each type of client.

  My goal is to publish the project, where each type of client has their own output generated. Do it this way, which is listed in the help topics of table of contents for each type of customer that is not correctly displayed.

  Example: National accounts TOC

  What is generated:

  I have tagged in the table of contents to the conditional tag appropriate help topics. Help, please. Any advice? I can also be reached at [email protected]

  None of your screenshots came through - the icon of camera in the web interface allows you to attach images

• Access invited E3000 and static IP addresses

  I have an E3000 I just put in place.

  I have two questions:

  1 > I'm replacing a WRT110. I had the old router with a static IP address provided by my ISP. I have configured the E3000 with the same address and I can't access the internet. Are there tips for setting this up on an E3000?

  2 > as configured I there is a feedback network configuration. BUT when I have access to the router, I don't see the tab to be able to set it up. Am I missing something?

  Before you configure the static IP address on the router configuration, make sure that it runs on a pc connected to the modem. One of the links below will help you manually configure the router for the static IP address. With your query on the support of the router with network of comments, Yes, the router will be certainly able to, but it should be through Cisco Connect. I also have the statement on the links below. If you're going to do is set up the router manually through the web interface then install Cisco Connect.

  Getting to know the Linksys E3000

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=7f3d861e3574460fbfacb3b2b0b46104_21476.XML&PID=80...

  E3000 frequently asked Questions

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=b201efaa44bc460d84caee156b4e12ed_E3000_Frequently...

  Implementation of access as a guest by using Cisco Connect

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=c3e42afc03994df5bb6bc531b42e9201_21461.XML&PID=80...

  Setting up a router with a static IP address account

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=91dbbf0c772e48b9bebee106abb837c9_3979.XML&PID=80&...

  Installation of Cisco connect after you set up the router manually

  http://homekb.Cisco.com/Cisco2/UKP.aspx?pid=80&g=80&g=80&VW=1&articleid=22389

• Only 1 of the 2 computers in my LAN recognizes my static IP address assigned by my ISP - HELP!

  I have an IP address from my ISP, but only one of the two computers in my LAN presents this static IP address in the "ipconfig" and it connects to the internet, the other computer Watch has "169.254.XXX.XXX' IP address and does not connect to the internet.  How can I fix it? I don't know much about the TCP/IP settings.  OS is XP Pro SP3.  I have a DSL router from single port connected to a simple switch 5 ports, then two CAT5 cables will switch on both computers.

  Thanks for your help!

  derisk

  Hello

  Two computers cannot connect to the same connection using the same IP address. Each computer on the network must have its own unique IP address.

  You need to get a cable/DSL router. Configure the WAN port (Internet) side with your static IP address and connect all the computers the and other equipment network on the side of the router LAN.

  Generally, it looks like this, http://www.ezlan.net/network/router.jpg

  P.S. You don't need to use the wireless if you do not, it is very difficult to find a new wireless router.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to remove a static IP address b110a

  I changed my wireless router and its IP address clashes with the static IP address that I had set for the printer.  How can I change the static IP address of the B110a or it return to a dynamic address?

  Hello

  Go to the menu of the printer and find the default option of restore network and select it. That should restore the network 192.168.1.0 subnet.

  

  Visit the Center of HP wireless printing for more information. You will find a multitude of assistants of installation and diagnostiocs it available for download.

  Best regards

  ERICO

• Changing from DHCP to static IP address

  Hi, I was wondering if anyone can help.  I initially set up my VMA to be a DHCP client, but now I need to configure it with a static IP address.  Any help would be greatly appreciated.

  @RParker, not if it's already been decided... This is only available during the first time, you deploy vMA

  @Op

  You have 2 options: either run through Setup again by running:

  sudo /opt/vmware/vima/bin/vmware-vima-netconf.pl
  

  OR

  Manually configure the interface to move the DHCP STATIC server, since it is a RHEL5 system, you'll find tutorials on the creation of a static IP address via the web:

  Here is a tutorial that can be used: http://www.wallpaperama.com/forums/how-to-change-ip-address-static-dynamic-linux-fedora-core-red-hat-t1692.html

  I recommend you do this in the console of the vSphere vMA (not via SSH session) Client in case you make a mistake you will lose access to the host.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Computers with static IP address, get addresses (169.254) APIPA

  There are several posts on my network configured with static IP addresses. To go to sleep or restart (warm), they will get an APIPA 169.254.x.x. address I found that there are three ways to solve this case temporarily:

  1. Shut the computer down (cold) and back on the power.
  2. Disable and re-enable the adapter.
  3. Disconnect and reconnect the network cable.

  I had some success with affecting the NETWORK 100 Mbit/s/Full Duplex card AND the port of the switch to match. This seems like a solution of cloogy. Updated the drivers of the card toward the newer versions does not help. The problem exists on many brands adapter, including Intel, Broadcom and Marvell. Nothing useful is in the event logs. Our switching infrastructure is Cisco all if it matters.

  Can anyone help?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• HO OfficeJet Pro 8600: how to remove a static ip address on my HP 8600, using mac 10.7.5 work with wifi

  I have trouble printing through my wifi network. How to remove a static ip address on my HP 8600, using mac 10.7.5 to work with wifi?

  With the help of my NetGear N900 / CG4500BD modem/router with DHCP, there are different IP addresses of the printer, if the printer is connected is 192.168.0.13, when the printer use wifi IP is 192.168.0.20, and on the printer, it shows 192.168.1.142 I think is a static IP address, because it can cause the confussion.

  I appreciate your help, thank you, the Job Dr.

  Hello

  Please go to system-> Network Preferences. Select the airport on the left, and then click Advanced in the bottom right. Switch to TCP/IP and select "using dhcp". Click ok, and then click on apply. After a few seconds, you should get an IP address from the router.