Several videogames to randomly lock up, crash to desktop or cause a BSOD

Similar Questions

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Use of system high - random, TFP causes a BSOD.

  Original title: System high use

  Hey Microsoft:

  Software can dominate the system resources?   I have a program which, lately, seems to want to use all system resources to the point of view of a BSOD.   Unfortunately, there is no way to post a screenshot of the Task Manager.  So I ask on manually in this post.

  Username name image CPU Memory (Private working set) Description

  Taskmgr.exe Gary S...        00 2 112 K Windows Task Manager

  PTF 16PRO.exe Gary S...       TurboFloorPlan3D 00 212 172 K

  Winlogon.exe 00 1 896 K

  Any software that I run... IE11, Google Earth, Photoshop Elements, works fine.  But at random times, TFP causes a BSOD.  BAD_POOL_HEADER sometimes, sometimes other random messages. Sometimes, this software will work correctly, but when I click the X (to close), usually I'll take the option to SAVE.  Sometimes it will just stop, and will display the BSOD.  If my CPU / RAM goes bad, why who is not performing OTHER software?    I tried to reinstall the TFP, where the initial installation has not "installed" correctly.    And, if this software is not compatible with my Windows 7 Pro 32 bit, then it would not operate in first place.    I thought to do a total reinstall of Windows7.  But, the last time I did this, the FORMAT option on the disk version would not allow me to FORMAT my hard drive, just DELETE the partition only. Which could explain the instability of my copy of Windows 7.   If my thinking is correct, then THIS time, while still in Windows 7, put in my CD Player installation disc, FORMAT my hard drive.  Restart the disk, then go through the process of re - install... correct?     Advice?

  stanulg

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Whenever I connect to my user account a ToolTip displays 'digital lock is activated. "This can cause you to enter your incorrect password."

  Original title: the number lock is enabled

  Whenever I lock my screen, a boring ball comes under the password field saying: 'digital lock is activated. This may cause you to enter your incorrect password. "Is there a way to stop this apppearing balloon?

  (BTW. I don't get the point of this warning. How do I enter my password incorrectly just because my NUMLOCK is turned on? I understand perfectly that I could get my password with numbers wrong when NumLock is OFF, but possibly you not just because the NUMLOCK is turned on?)

  (BTW. I don't get the point of this warning. How do I enter my password incorrectly just because my NUMLOCK is turned on? I understand perfectly that I could get my password with numbers wrong when NumLock is OFF, but possibly you not just because the NUMLOCK is turned on?)

  On most laptops, the numeric keypad are superimposed on top of the letter part of the keyboard. While the number lock is enabled, the letter I becomes 7, o becomes 8 and p becomes 9. It will have a drastic effect on the password you type...

• Several locks and crashes as a pop - up "Plugin - Container.exe Fault.

  Original title: I GET a "PLUGIN-CONTAINER. EXE ERROR POP UP, WHAT SHOULD I DO

  MY SYSTEM IS ALMOST READY TO COME OUT AND BE BEATEN TO DEATH! SORRY, I HATE THE IDEA, TOO. BUT MY COMPUTER IS BLOCKING ME AND FREEZES SEVERAL TIMES A DAY... /... I GET A POP UP STATING THAT THERE IS A PROBLEM WITH "" PLUGIN-CONTAINER. "." "" EXE"IF I REMOVE THE" WINDOWS TASK MANAGER "THINGS A LITTLE QUIET. THERE IS A PROBLEM I DON'T KNOW WITH THE "PLUGIN-CONTAINER. PROGRAM "EXE". I'M HOPING SOMEONE ELSE HAS HAD THIS SAME PROBLEM, IT REALLY SEEMS TO SLOW DOWN MY COMPUTER.
  WHAT IS "PLUGIN-CONTAINER. EXE AND ALSO WHAT THE CSRSS PROCESS. EXE PROGRAM?, AND CAN I REMOVE IT OR WHAT? I would REALLY like TO BE the ONE TO CONTROL THIS COMPUTER... FOR ONCE, THANK YOU E.S.POTTS

  Hi Eric,.

  Using Mozilla Firefox?

  If so, this is a plugin for the Mozilla browser

  You can read about it on: http://support.mozilla.com/en-US/search?os=1&fx=1&q=plugin-container.exe

  Kind regards

  Houta Bolduc

  www.techquery.in

• Computer crashes / stutters quicky several times at random

  It is quite random, I play on Steam, videos YouTube, Aol mail I've had for years. Its a powerful system that I can do everything without a problem. But the only problem I have is that it freezes randomly for a few times a fraction of a second.  He can do it again an hour or do not do until the next day.  Before I reinstalled it I had occasional memory dumps, I did a test of memory and he continued on the desk without saying anything. And of course after that I installed it (Microsoft support made, 2 weeks ago) I've been doing these feezes. I reinstalled everything I had before with no problems running. Also I don't have the option to Hibernate more

  Hello

  See if this helps you improve performance, etc.

  'How to disable and re-enable the putting into hibernation on a computer that is running Windows'

  http://Support2.Microsoft.com/kb/920730/en-us

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Since the relocation did you that that Service Pack 1 is also reinstalled and Windows updates are downloaded and installed.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  See you soon

• Firefox crashes at random, leaving no crash info

  Firefox crashes randomly. I tried all the fixes I could find in the support forums. It crashes in safe mode. I've updated all the Add-ons. There is no crash report. I created a new user. I have search for viruses and malware

  ID of the Crash

  No crash reports have been submitted.
  

  Firefox 3.6.3 has done this for me recently and it's out of the blue. It has worked very well so far and I don't know what is the cause of crash randomly.

• Touchpad randomly locks and won't unlock on Satellite P50 - A

  Don't know if someone can help out me, but I recently bought a P50 - A laptop and I have problems with the touch-pad.

  Basically, what happens is that every now and then my touch-pad locks at random and then allow me to unlock and will unlock once I reset the laptop.

  I checked the drivers and everything seems to work well and there seems to be no hardware conflicts.

  Has anyone else got a happen to them?

  Hello

  Have you noticed this behavior from the first day? You can toggle touchpad (lock/unlock) using F5 (FN + F5)?

• After you apply Windows XP - SP3 post upmedia locks or crashes or both

  I have a HP Pavilion a1420n (Media Center) and Pavilion HP laptop also with Media Center, after applyig SP3 the HP Pavillion locked up and crashed.  After 4 tries to apply the updates, it crashed twice, locked up once and was not able to backup or restore.  I was able to get SP3 to apply the Media Center, but it does not start I need help, I am not a technician.

  OK, if the system was to SP2 before you apply SP3, then you have updated such as advised by Microsoft. I did a bit of research on this subject and even if you aren't alone, I couldn't find a definitive answer. Another contributor to this thread (ElderL/Jose) could help. If Jose can help, your problem is definitely a 'hard' nut

  Unlike Jose, I have MCE and although I tried, I was unable to reproduce your problem.

  My best advice for a possible solution is to do a clean install. I've published some guidelines here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/after-going-through-a-recovery-process-on-a-win-XP/54a108ac-Fe59-42d2-A146-8b830077aff4

  .. . If you need more information let me know.

  Tricky

• Several virtual machines being locked

  Using View 4 here and every day when I come in, there is at least one user who cannot access their VM, 'the source of funds attributed is not available... ". ».

  Our display configuration is currently just a standalone ESX 4 box that manages these clients to view. We have other clients to view a cluster and we have not seen this issue, but the customers on the cluster are not used as often as the autonomous zone.

  So, again, it is the classic question of "virtual machine is locked.

  Here's what I've done so far:

  1 open the virtual machine in the vSphere client: "cannot connect to the mks: vmx connection contact has failed."

  2 vmware-cmd - s unregister

  -tired saving in vSphere once again, without love, the same error...

  12 gave up, restarted the ESX box, fixedit!

  -another machine but now is to show the same problems... Sigh...

  Any help/advice would be great...

  You don't mention this patch you enjoy, but it sounds like the question that we knew before loading the latest patches for ESX.

  Make sure that you have patched your ESX servers for March 2010 cumulative hotfix:

  http://KB.VMware.com/kb/1018403

  Specifically KB1017465 corrects a problem with Dev Tap with PCoIP and resolution of changes that could the virtual machine to crash (http://kb.vmware.com/kb/1017465).

• Several new icons on lock screen wallpaper

  My Mini2 iPad with iOS 9.2 shows three icons not identified on the bottom of the lock screen, as shown below. They are in the lower left corner, Center, above the drag bar, & bottom right behind the camera corner. I disabled the Apps suggested, but this has no effect.  These icons are not sensitive to the touch or make slide and disappear once the screen is unlocked. See all these?

  So how are they here, and what applications of functions do belong to?  How are they useful for me?

  

  Bill S.

  Looks like they have been added to the screen used for the lock screen background image. Try to change your lock screen background and see if the icons disappear.

  Settings > wallpaper > choose a new wallpaper

• Satellite P10 - 792 lock ups / crashes and battery

  I used my P10 792 even since I bought it 3 years ago. S there was a decreasing battery box that appears on my screen (sometimes) say I should replace the badly inserted battery and restart my computer. If there is also a problem mouse touch pad. He touchpad doesn't respond well to orders while he was trying to move the pointer.

  The battery alarm message usually comes with the dysfunction of the touchpad. I have to press ESC to restore the touchpad back to normality and close the application of process Btrychkr.exe under the menu CTRL + ALT + DELETE to make the gibbous Moon box to disappear.

  But the main and most recently problem are blockages, especially when running programs that require a video grand advanced such as 3D games and DVDs. The screen freezes for several seconds, and then he comes back to life. This is sometimes followed by a sudden stop down.

  Finally, when I try to turn it on, it doesn't even get to loading windows before it stops again, and so on. So I have to wait several minutes before pushing on the button again. Now, we have reached a critical situation where the computer won t last more than 10 minutes before its shutdown automatically without notice. There is no error message so I don't see what is the cause of the problem. (Battery? Overheating?)

  It is also important to note that one of my friends with a series of P10 also had these same problems and finally had to buy a new one because the laptop has been just the hand. I fear me comes with the same situation of m.

  How can I solve this problem?
  I would really appreciate the help.
  Thank you

  Hello

  You you use laptop for 3 years. You replace the battery during this 3 years?
  Isn't it? I think it would be a good idea to replace the battery.
  Usually after about 500 times of loading and unloading procedures the performance of the battery goes down and the life time decreases

  Additional during those 3 years, the laptop needs to be cleaned. Fans suck dirt and dust and sometimes cooling modules cannot turn with maximum performance and can not cool the CPU and other devices.
  Of course, the overheating could be a reason for your shutdown problems

  Looks like you haven t much experience so I think someone with more experience (technician) is recommended to clean the notebooks cooling modules

• Random reboots and crashes with WUDFRd failed to load of the device

  I get random reboots and falls down and receive check the event viewer I see this -.

  event 219, kernel-PnP

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_USB2. 0 & PROD_CARDREADER_CF & REV_0100 #606569746801 & 0 #.

  well if anyone knows what it is?

  Your problem is unlikely to be associated with the event ID: 219, which warns a driver did not load. In fact the driver load a few moments later and the portable device then works.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• After several uses, my "get mail" button crashes and recover any new messages.

  I've been using TB for many years. This problem just started about 8 months ago. When I first start my computer, and then open TB, it works very well. After a day or two this problem starts. When I click on 'Get mail' it just hangs and down States ' connected to pop server.tampabay.rr.com"I have to restart my computer to solve the problem. Thank you Tam Inman

  and this problem occurs if you disable e-mail scanning in your fight against virus package?

• NAS200 locked after crash

  Hello

  After a power shutdown, rebooted all ok and I can access all files read. But all the Scriptures gives access denied. Smart and Scan are Ok. Same interface is unable to create a new directory to share.

  Please hellllpppp. Anyway to unlock?

  I tried to recreate the actions, it's ok, but I can not yet write.

  Hello

  Finally, I unlocked the thing.

  I tried running ScanDisk from the admin page, but it did nothing. So I have activated "auto Scandisk if improper shutdown" option and restart the nas server. After the reboot it has automatically run scandisk, for a long time, maybe an hour. Then after all was read/write.

  I guess that's the repairs some data on ext3 partition as the prevention of any writing.

  Thank you