Signature Smartphones blackBerry Auto?

Help! I just had my Blackberry last week and love it! However, I want to add a signature automatically at the end of my emails and cannot find the way to do it. It's the Curve 8310. Anyone know how?

YAY! Success! Thank you so much!

Tags: BlackBerry Smartphones

Similar Questions

  • Email signature changing blackBerry Leap

    BlackBerry Leap - where is the text box to type in a signature of e-mail after I disabled "automatic signature?

    Auto signature must be enabled.

  • BlackBerry Smartphones Blackberry Curve 9310

    I started the download of MP3 music on my Blackberry Curve 9310, OS 7.1.

    It has been loading for 2 days and my phone will not work.

    I did and A:LTt RST, but it did not work.

    I pulled the battery several times and plugged the charger, but that did not help either.

    My phone is still stuck on loading.

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • Email signature changing blackBerry Z10

    I can't find any reference in the user manual Z10 with regard to change his email signature by default ("sent my smartphone BlackBerry 10 on 4 G for Verizon Wireless LTE network.") to a custom created one.

    Any ideas?  Thank you.

    Open your Hub and tap the three dots in the lower right corner, and then select settings. Click e-mail accounts, and then click again on the account in question. You can change the signature there.

    See you soon.

  • BlackBerry OS Smartphones Blackberry Bold 9900 software update from version 7.0.0 to version 7.1.0

    HELO everyone

    I tried to upgrade my device software Blackberry Bold 9900 version 7.0.0 to version 7.1.0 but with difficulties. I tried to use the Blackberry Desktop Manager, but there was no version 7.1.0 figure among the available updates. Even when I tried to do it directly through the official website of Blackberry, also Version 7.1.0 was not shown. Finally, I tried to do the update with my phone directly by going to: Options > device > software updates.

    It shows my Version 7.0.0 Bundle 2406 current and available in a version 7.1.0 Bundle 1149. But when I clicked Perform Update to download the new version, he has shown preparing to download but then displays an error message such as "Download cannot continue because your device cannot connect to the update server using the following methods: Wi - Fi.

    During this time, I did not upgrade with a Wi - Fi connection because I have an active blackberry data subscription of 2 GB of my mobile operator.

    Please I need help on how to perform the upgrade from version 7.0.0 to version 7.1.0 with the last packet.

    Thanks to you all I'm waiting for your helpful solution.

    Hello and welcome to the community!

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry Smartphones BlackBerry 9790 keeps restarting

    Please I a BlackBerry 9790 I just got as used just not up to months past but it maintains itself frequently reboot at a time I thought it was rhe battery I bought a new but it keeps doing the same thing. Please kindly help me thanks

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • BlackBerry Smartphones blackBerry 9800 - scroll

    I'm unable to scroll before the initial screen in applications like facebook etc etc.

    Hello!

    Each time a random strange behavior or slowness comes, the first thing to try is a proper reboot:

    • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.

    See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    If this isn't the case, then I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    Good luck and let us know!

  • BlackBerry Smartphones Blackberry curve 8520 white goin guard then dies?

    Suddenly, my bb 8520 curve goes white then dies even if he is charged at 100%? I got new battery but still does it? So, it may be the battery?

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • BlackBerry Smartphones BlackBerry Torch 9850 PC board of the battery problem.

    For the last couple days, my torch 9850 has been emptying faster than usual. The drainage rate was about 4.31% per hour. Unfortunately today, I was with my flashlight to take a photo when I watched the battery indicator drain about 80% of yellow to the red outline with the flashing led in under 2 minutes. The phone also randomly off followed by a solid red led, followed by 2 red blinks. Since this morning, I put a good known in battery. He killed that, in about 15 minutes. The only third party application that I have is The Weather Channel. The only application running is phone, SMS, email and contacts. I reloaded the software the first time that drain you.

    Hello!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    Good luck and let us know!

  • Smartphones blackBerry device software upgrade, does not (Bold 9930)

    Bold 9930, Verizon,.

    Everything was going well 5 hours ago. Backup and synchronization with Desktop Manager and everything was good. I clicked on the 'Device upgrade' link. He me everything first download and install the new Desktop Manager software. This seemed to work properly. Then it downloaded the new software device and conclusive to upgrade of the unit.

    7.1 bundle, 2705 (v7.1.0.991 platform 5.1.0.678)

    The Setup program indicates that the new software has been installed, and then it seems to want to reboot the device. The device never returns, ends with an App error 606.

    I loaded the cool device software, without change. Removed Software Desktop, loaded fresh, then loaded a fresh device software, without change.

    I tried to load my old device software but the Desktop Manager will not allow him.

    I reloaded software device 3 times, always the same behavior, always the same error at the end.

    I'm out of ideas.

    Any help?

    Hello and welcome to the community!

    brunostyle wrote:

    I tried to load my old device software but the Desktop Manager will not allow him.

    This bit is quite unusual... done correctly, you can force any OS on your BB package as long as it's your exact model number. So I'm not sure if you're really using all the good stuff... so, even if a lot of this will be redundant, please examine carefully for subtle tricks do you need to... done correctly, this can heal the situation. But any errors on the way (not ignored, stage not completed correctly, etc.) invalidates the whole process and translates the automatic process of support and limited to only the OS packages currently supported by your specific carrier.

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • Smartphones blackBerry CURVE 9220 SLEEVES to the TOP AND DRAINS the BATTERY LIFE

    My blackberry curve 9220 gets really hot and begins to drain the battery.

    the entire battery life is dained out in less than 3 hours

    I try to freshen it, but it does not really.

    and there is no runnig requests in the back except the example by default-, phone, browser, bbm, and messages.

    and the strange thing is that when I turn off the mobile network of the battery keeps draining

    can someone please help I really need my email, bbm and whatsapp return

    Hello and welcome to the community!

    Based on your description, I would deduct low or weak signal from your mobile service provider. Digital devices to modulate their energy consumption depending on the strength of the signal they receive from the Tower of the carrier. Low quality/signal strength, higher battery drain. For good check, you need to contact your mobile service provider, because it is the network, which is the cause. It is possible to have a few problems in the areas that you are in.

    You might also try to start in Safe Mode, to remove all applications 3rd automatic launch party (even if you do not see them in the AppSwitcher Ribbon, they can run):

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • BlackBerry Smartphones blackberry support community

    BBM 7.0.0.123 can't read (unsupported) n emotican of character text

    On this basis, I would deduct instead is the BBM message you receive contains characters of a language that you have not installed for your BB. For example, they send Russian characters, but you do not have Russian language installed on your BB, then your BB don't then interpret and display characters and replaces those black boxes in their place.

    If you know the language that is sent to you, you can try to install on your BB... do it, start by taking a full and complete backup of your BB... you can find instructions in the link in my sig auto on this post.

    Then, learn this:

    • KB05305 Location of support for BlackBerry smartphones

    That will guide you when you choose the packages of BB OS to install on your BB via the following procedure.

    Please visit this official download portal as you go along. If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

    Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. After installing the operating system on your PC package, please remember to remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    Don't forget that you remove, since your PC, any other BB OS devices as packages with more than one installed on the PC can cause conflicts with this procedure.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • Smartphones blackBerry eception exception: Application net_rim_medialibraryplayer (291) does not. process is completed

    Hello world

    I'm listening to music with my blackberry 9700, but as soon as I select a title and click on play all crashes and I have to restart the device.

    After indicating my pin code, I get the error message "eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

    What this means and what I can do about it?

    Your help is really appreciated.

    Thank you very much in advance.

    Miriam

    Hi and welcome to the forums!

    "After indicating my pin code, I get the error message" eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

    Do you mean your device is password protected, and you enter the "pin" or you

    must enter a PIN in order to listen to a song?

    I guess that your support is on a memory card, if you take it off you have the same error?

    No problem with the ringtones and alerts?

    The first step would be a traction battery as shown below.

    No data will be lost when you do the following: remove the battery while the device is activated.
    Replace after one minute, let the device reboot 10 minutes, see if the problem is corrected. I like to leave the device completely reindex the files.

    If this doesn't solve your problem, try raising the phone in safe mode;

     KB17877 How to start a BlackBerry smartphone in safe mode.

    Check the settings of your media card, if they are correct, reverse them and reset. Then battery pull.

    Use the following settings in the segment of memory of the menu options.
    (options > memory)
    Card support ON
    NONE encryption mode
    Media transfer protocol WE
    WE support mass storage
    Auto enable mass storage support when it is connected TO

    (still in status > scroll to security options > encryption0)

    Make sure of course have no content protection enabled.

    Battery pull what happens?

    If all else fails, I would use the following to verify your card (save the media BEFORE!)
     ' KB14745 ' " Memory card error, please use disk utility control on computer" is displayed on the home screen of the smartphone BlackBerry.

    I've left the best for last, which would be a wipe and charging the device, OS, after a full backup successful device using Desktop Manager.

    Try and see if you can get the following error information:

    KB17215 How to extract information from a BlackBerry smartphone with the Chargers or incorrect command line tool

    And the last would be the device OS reload.

    KB13323 Untrapped exception errors appear on the BlackBerry smartphone

    Let us know how it goes!

    Thank you

    Bifocals

  • How to download music content of the smartphone BlackBerry 8530 for Windows Media Player?

    Connect the Blackberry Curve 8530 to USB connection default to the Windows Vista system to Windows Media Player-device Set Up to Blackberry8530.  Choose to synchronize give 2 options in manage files on existing device.  Leave or delete existing files on the device and sync to the space available.  Choose to click 'next' only will configure sync.  How to download or transfer the contents of the music of smartphone BlackBerry 8530 for Windows Media Player?  Content music on BlackBerry has been added to the same player before being wiped and reprogrammed.

    Hi Timothy,.

    You can use the software provided by the camera to transfer music from your device to the computer. You can consult the documentation provided with the device.

    Windows Media Player is used to copy music, videos and pictures of the Player library to a portable device, such as a compatible MP3 player. See the link below

    Set-up-a-device-to-sync-in-Windows-Media-Player

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

    You can know

    Add-items-to-the-Windows-Media-Player-library

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

  • BlackBerry Smartphones Blackberry Priv bricks during update MM

    Hello everyone,

    As a user of BB for a long time (since the curve 8310 until the Passport), I couldn't resist the temptation and I ended up buying a private AT & T unlocked the B & H store in Manhattan during my vacation.

    As soon as I come home in Spain, I started the MM updated procedure with an autoloader, according to the following instructions: http://global.blackberry.com/en/support/smartphones/blackberry-PRIV/reload.html

    I downloaded the SW AAF355 version and drivers USB (computer restarts after the installation).

    Installation script has detected the Priv in fastboot mode after lowering the volume + key combination of power and apparently started the update, but suddenly the phone restarted with black screen and led flashes between purple and green.

    Quick notes: I've updated devices BB10 via autoloader a couple of times and I did the update did not complete successfully using Mac OS (latest version), but I tried tha same procedure from a W7 PC too.

    Now, I'm still stuck with black screen and led flashing and computer does not detect the phone more. I tried all combinations of possible keys try to restart the phone but no luck.

    So I ask help to members of the community on what can I do to get it fixed, cause I think that the problem of Mayor is I'm in Spain...

    Thanks in advance.

    OK, it seems that I finally I could remedy then I'll write the steps that I followed, just in case.

    In my case, I was not able to start the phone in following mode fastboot with all combinations of keys, and the computer it has not detected:

    -Low volume + button.

    -High volume + button.

    -All buttons pressed at the same time.

    But after some trial and error, I pressed the middle (the toddler between flight up and down) button + power button and the phone started in mode 'starting'

    The computer detects it and loaded MM autoloader (first attempt get stuck again, but a 2nd went until the end). After that the phone boot up normally.

    Thanks to all the members of the BB community and have a nice day!

Maybe you are looking for

  • Satellite L755 - CD/DVD burner stopped burning

    I have a Satellite L755 systems running Windows 7 SP1 which is 11 months old and recently had to get back original which I did without any problems, but I have now discovered that my CD/DVD burner stopped burning. It can read, play music and video, b

  • With numbers 3.2 How to get the current date on print

    I insert the date in the header: Insert > Date & Time Format choose and set today's Date. However, when I print this SS next week, I want the date to next week to automatically appear. How do I do that?  Thank you Owen

  • After reconnection messed TCP/IP

    Again... back with TCP/IP more questions. When I start my two cRIOs they connect correctly, and my side host, I read the header the cRIOs send up and read correctly the following data. Now, if I stop my host application, connections are closed on the

  • is this compatible with BIS-B service method?

    Hi all I just went through this useful link to download large size of the server data. However, it is only compatiable with an MDS service. I don't know if it is compatible with the BIS-B service. is there anyone tried this? Here is the link: http://

  • BlackBerry Z10 problem creation account Exchange ActiveSync on Z10

    Hi all I'm trying to set up my e-mail account on a Z10 using Exchange ActiveSync. Setting up the same account on a Samsung Galaxy S3 works perfectly well. When I use the normal installation procedure, I enter my e-mail address and password and get ba