Simulation/Interaction knowledge check w/strikes

Similar Questions

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• The use of knowledge check with sanitation?

  Our courses are set up so that the quiz questions act as knowledge checks throughout.  For example, we have a course with 20 slides, with a quiz question each slide that will remedy a previous slide if the answer is incorrect.  The problem is that scope quiz once, slides between the slides 'return to the quiz' and the next quiz question are to be ignored.

  What we have discovered is that once the student is in the scope of quizzes (after the first control of knowledge), Captivate you go directly to the next quiz question when the student arrives on a slide that contains an action for success of the «back to the quiz»

  For example:

  Slide 1	Slide 2	Slide 3	Slide 4	Slide 5	Slide 6...
  Text slide	Quiz question 1	Text slide	Slide text sanitation	Text slide	Quiz question 2
  Action = next slide	Action = next slide	Action = next slide	Action = back to the Quiz	Action = next slide	Action = next slide
  inQuizScope = False	inQuizScope = True	inQuizScope = True	inQuizScope = True	inQuizScope = True	inQuizScope = True

  In this example, slide 4 is the sanitation for the quiz question slide 2.  Slide 5 is to be ignored during the progression of courses (starting at slide 1 and progressing along the whole time), because the student is brought quiz slide 4 is seen.  In this case, by selecting the 'next' button triggers the 'back to the quiz' operation and causes the course proceed directly to the next quiz question (slide 6).

  Our workaround for this has been to add additional slides for sanitation at the end of the course, which can only be accessed from the questions on the quiz, but that seems to be additional work and is not very elegant.

  Someone at - he found a way to sanitation between quiz questions without skipping the blades once within reach of quiz?

  The only way I can think of is to use variables and actions to follow the slides had been seen so that if a question has been reached before the slide before it had been consulted, then it would jump to that slide.  But this solution would require some work and would not necessarily more "elegant" you have solution.

• Implementation of knowledge check quizzes before the Final Exam

  Hello captivate the world,

  I have almost finished a training module to a customer. In this module, we were asked to implement some unclassified knowledge check quizzes before the final graduate exam. Because Captivate 5 allows only 1 quiz per module, I created the verification of unclassified knowledge question slides using multiple choice answers related to their hotspots specified as a solution. The user selects a response and a timed response will allow the knowledge if they got the answer right or not and why. The problem is that users can select several answers on these slides because there is nothing to force the user to select only one answer. I saw a thread earlier to unique quiz from scratch and if someone could send me the link to find that would be great, but I was hoping there was a way to force a user to be able to choose one with the slides that I have already created. Thanks in advance...

  Hello

  You have several boxes click on a slide, but user can choose only one? Create a tip action for each click box, who runs what you want to achieve with this click box and at the same time disables all the other click boxes, as simple as that. Or hide all the other boxes to click, which is reflected also by deactivation. I've explained this workflow in the blog post on the model of a script.

  Lilybiri

• Knowledge check test slide for several controls of knowledge

  Hello

  I created a series of pools quesiton. I have 9 knowledge controls in my project which are questions from a pool of quesiton randon.

  At the end of each audit knowledge, I want to display a page of results of "quiz". When I select this option in Quiz preferences, it displays only a slide of result after the FINAL knowledge control.

  Is it possible to have a review after each audit knowledge?

  Your help is greatly appreciated!

  Susan

  It will be not possible with normal question slides, because only the recovery feature clear responses and it will always be the whole of the quiz.

  If you want to use the question slides, because you find it too cumbersome to create custom question slides, for now I don't see a solution with multiple files of Captivate: each audit of knowledge must be a different file, where you can add the possibility of recovery. If you want to see all the results in the main file (who called knowledge small check files), you will need to use JavaScript or the widget Save & Load Data from Michael Lund (cpguru).

  Lilybiri

• interactive report check box - paging

  Hello
  
  I have an interactive relationship with a checkbox on each line. The user to select/deselect the lines then presses a button to save the changes. This requires a process of page that records data of this line in a table. It works very well if all the lines of the report are displayed on a single page. But when the report is displayed on multiple pages, only the currently displayed data are saved.
  
  We lack 3.02.
  
  Any suggestions on how to handle so that the user can page through the report of audit or boxes uncheck. At any time they can press save button and have all changes recorded by the process of the page?

  This old blog Joel explains exactly what you asked for Preserving ticked the boxes in a report
  Check the comments section on the replacement of the function $v with built-in available in apex 3.0.

  Finally, when you send the page that you have checked in the collection record ID, then loop top and the necessary treatment in PLSQL.

• After looking at a course, inability of impossibility knowledge checks with zero weighted value

  Captivate 5.5

  When you look at a course that sailed through, what knowledge approach see issues, next button does not work.

  Tried to set preferences in multiple ways, without success.

  Never had this problem before in Captivate.

  Help, please

  Hello

  What is your setting ofr Quiz preferences, setting, required? And how many attempts you allow the Quiz level?

  Lilybiri

• Check if interaction checkbox was clicked

  Can someone tell me if it is possible to use the widget box of interaction advanced in Captivate 7 as part of a quiz as described below.

  I want to do is to have 18 check boxes on my blade with a button which when pressed will be prompt action to check if the good were checked. If they have, I'll show correct your comments, otherwise I'll show incorrect comments.

  I guess, in short, I'd like to know if it is possible to update a variable based on the question of if the box is checked for example '_var = 1' or not '_var = 0'.

  I had planned to create a customized activity using boxes to click and advanced actions to achieve the expected results, but the iPad can't manage more than five boxes of a slide is clicked.

  Thanks in advance.

  Hello

  I'm not sure that the iPad will be able to support that, because you're never sure, but we can do of Captivate. My blog on the use of checkboxes/radio buttons for custom questions is the most popular post I've ever written, when I display the number of visits: http://blog.lilybiri.com/widgets-and-custom-questions-part-1

  The interactions of check boxes and option buttons have identical functionality but are guaranteed for the release of HTML5.

  You will see that the variables are not Boolean, but will be empty when the check box for that item is not selected, or equal to the item when selected. This means that you must create a conditional action that verifies the correct entries like this:

  IF v_one is equal to "This is the first text of the element" AND

  v_two is equal to v_null and...   where v_null is a variable empty, or you can also

  ....
  

  Since this is a static interaction, you will need an event action: you can use a "Send" button or a drag event.

  http://blog.lilybiri.com/using-Captivate-widgets-some-tips

  Lilybiri

• difference of simulation between multisim 10.1 and 14.0

  I've been using Multisim 10.1 for check and create examples for students and want to spend 14 Multisim. Simulating a small ac-circuit I got different using multisim 10.1 and 14 results.

  

  The result of multisim 10.1 is identical with the manual solution.

  No idea, what could be the problem?

  concerning

  blanne

  Hi Blanne:

  The default setting of simulation in Multisim is letting his engine to automatically determine the TMAX, the maximum allowed timestep. In version 13, we have modified this code in such a way that it will leave the slower to simulate faster real-time frequency circuits, we did this in order to accelerate simulations as requested by users. Most of the time, this change has worked as expected, but your circuit is a clear example of a negative effect of this change. Its accuracy is affected by larger time.

  In your evaluation of Multisim 14, you can quickly change that. Click on the Interactive analysis button in the toolbar to open the properties of the analysis and in the analysis of Simulation Interactive > look tab crawl settings for the checkbox control labeled step of maximum (TMAX), place a check and let it set to 1e-005. Make your simulation again and you will now see the 1.155 a result in the multimeter.

  (Version 14 has been automatically calculate the TMAX as 1.25e - 003)

  I'll file a defect report so we review how automatically determine us TMAX so he will not state as in this example. I hope my explanation helps you advance your evaluation of the software.

  Kind regards

• Wrong frequency is simulated

  Hello

  I have circuit based on 555 timer which should produce 40 kHz (50% DC) square wave.

  But Multisim simulate Khz 26,367 only.

  Calculated circuit by "tools/Circuit Assistant / 555 Timer Assistant /" and checked with the data sheet.

  This circuit assembled aboard real maket and works very well.

  Version of Multisim is 10.1.1

  So, what's wrong here?

  Thank you

  Sergey

  

  Hello

  I built the circuit using the values of the specified element and I was able to get the circuit in order to produce the right reading by changing the time step (TMAX) of 1e - 5 sec to 1e-8 seconds, this setting is under simulation > Interactive Simulation settings.  By reducing the time step, you're saying the Simulator to take several samples and Donna and allow a reading more accurate.

• Multiple simulations in one project?

  Can you import Captivate projects into other Captivate project?  I use Captivate 8.01.  (BTW - for several years I used Captivate and I'm really impressed with the changes of the product!)

  I was tasked to create a demonstration with several sections accessed from a main menu screen I create in Captivate.  In each section, the hope was to launch the demo and simulation training for the different features of the software and create questions of knowledge-check not classified for each of its characteristics.  The final product will be distributed on a single DVD as a stand-alone project.

  My first thought was to record a demo and training simulation for each of its primary characteristics, and then use the branching/grouping of slides to make the project into a Captivate file.  I have worked with learning management systems and learning content before management systems and realize that it would simplify the task, but unfortunately my company nor the client have an LCMS or LMS System.

  If I publish each of the simulations in the form of SWF file and create a project aggregator, is there a limit on the number of modules that can be added?  Having separate demo and training simulations will really increase the total number of projects.

  Or, is it possible to use MS PowerPoint to simulate a course combining the Captivate files in the PPT?

  Any help will be greatly appreciated.

  You will need to open the 5.5 project and convert it to 8 (don't expect to get everything upgraded smoothly however, too much difference). You cannot import slides, but you can copy and paste slides between projects using the tabs interface.

  However, there is no way to open a CP8 don't project in an earlier version. I repeat: too many things have changed, especially at 8.

• How can I change the value of the sample during my simulation period?

  I'm about to set discrete PID profile vi to specify the values of the period of sampling of the order hold block. At t = 0, I wish that the value of 0.5 and then change to 1.0 when t = 5. Currently, only 0.5 goes to the waiting order discreet block. I think it's because the block takes this value and then use it for the entire simulation, do not check to see if the value has changed. Is there a way to tell the block to check this value at each time step and then adjust if necessary sampling its period?

  See code attached for reference.

  What is your overall goal for the sampling period? You will change the value more than once? Or only from 0.5 to 1?

  The PID setpoint profile should allow you to specify a profile for the values to send to the hold. He will see property values. For example if you specify only t = 0 setpoint = 0.5 and t = 5 setpoint = 1, you'll find it ramp the setpoint in 0.5 to 1.0 for the first 5 steps of time. If you want the sampling period of stay up to t = 5 0.5 is reached you will probably want to three elements in the array. set = 0.5 point t = 0, t = 4.99 set = 0.5, 1.0 = set point t = 5.

  If you're just fill one step, (from 0.5 to 1.0) you can use the Index Timestep in the Simulation parameters to determine the sampling period. Is attached a screenshot of what I mean.

• Flight Simulator 2000 works only on Windows 7, need help!

  I installed FS 2000, this FS 2000 Professional Edition used to work under Windows Millennium Edition. It istals fine but when I try to run it, it comes with the original window and try to read the disc 1 (inserted in the dvd player) and then sits there... nothing happens... .needs OSME help [here... enjoyed,

  Hello Chicktay,

  There are problems of incompatibility between Windows 7 and Microsoft Flight Simulator. My research, I find that the Microsoft Flight Simulator 2000 is not compatible with Windows 7. Either try to run the game in compatibility mode or mode of upgrade for Microsoft Flight Simulator X.

  Check out the link that will give you information on the execution of former programs in compatibility below mode:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• 9800 Simulator Reload/Hot Swap with Eclipse 1.1 does not work for me

  Hello

  I've updated all plugins Eclipse today range below;

  BlackBerry Java plug-in 1.1.2.201004161203 - 16 net.rim.EclipseJDE.feature.group
  BlackBerry Java SDK 6.0.0.29 net.rim.ejde.feature.componentpack6.0.0.feature.group
  BlackBerry Java SDK 5.0.0.25 net.rim.ejde.feature.componentpack5.0.0.feature.group
  BlackBerry Java SDK 4.7.0.57 net.rim.ejde.feature.componentpack4.7.0.feature.group
  BlackBerry Java SDK 4.6.1.49 net.rim.ejde.feature.componentpack4.6.1.feature.group
  BlackBerry Java SDK 4.6.0.23 net.rim.ejde.feature.componentpack4.6.0.feature.group
  BlackBerry Java SDK 4.5.0.28 net.rim.ejde.feature.componentpack4.5.0.feature.group

  I try to get hot to labour in the 9800 unsuccessfully Simulator code swap. All the online documentation says it should work and I saw the evidence that it works on the old JDK to http://supportforums.blackberry.com/t5/Testing-and-Deployment/How-To-Use-Hot-Swap-with-the-BlackBerr... . Nice article... but it does not mention the eclipse plugin. I can't find "Simulator of reuse" check box on one of the eclipse debugging configuration forms!

  When I change my code and trying to debug a second time, I get the message "A BlackBerry debugging session is already active."

  I can run the Simulator 9800 ok, but it takes 10-15 minutes of startup: ^(et cela tue ma productivité.)

  Could someone rim give a clear statement or point me to a final resource stating if hotswap is supported on the eclipse plugin.

  Thank you

  Randy

  I got it work after trying two additional things. I don't know which one solved the problem.

  1. I had an entry in my environment variable path pointing to a directory of 'bin' of the eclipse plugin that I deleted old.

  2. I did a complete new installation of the classic eclipse 3.5.2 1.1.2 BlackBerry plugin eclipse and plugin SDK 6.0.

  Don't know which of these things is switchable hot work.

  I still get traded an exception when the debugger attaches more switchable hot but if I click here my code gets hot and I am able to continue debugging on the 6.0 9800 Simulator so I'm a happy guy

• Help: Networking does not work on the Simulator

  Hello

  I downloaded all the versions of the Simulator, until the last 4.7 which has the storm, but for some reason networks do not seem to work on my Simulator. I checked the coverage of the network, said all this coverage is enabled but I am not able to use the browser to go anywhere. Could point out you what I did wrong please?

  Thank you

  got it works by MDS manual start as you suggested. Thank you all, it's a giant step for me, now I can get out of my cave and be connected to the world of my Simulator what a feeling!