Skype messages in another screen

Similar Questions

• Need to solve an Error Message 7B - blue screen of death/boot loop

  Hey community,.

  I need help. I'll try to find a way to resolve the error message on blue screen 7 b on a laptop HP Compaq 6710 b using XP, but he took trapped in a loop of boot BSOD and I can't access the command prompt to try to fix it. The situation is further complicated by the fact that the laptop has never been saved, and there is no XP discs for me to reinstall from.

  Wipe the drive and starting over is not a huge loss, but I need instructions on how to do that, without being able to use the last good config or the factory restore to XP disks.

  I'm sure that this information is on the internet somewhere, but the search engines sent me on a wild goose chase and I really hope I can solve this problem myself. I've only worked with Vista and need guidance on this.

  If anyone knows what to do, Please HELP! Good karma coming your way!

  Thank you

  Sryan2930

  Usually, I get this error when you try to transfer a hard drive from one pc to another, or after replacing a motherboard. The problem is probably the chipset/mass storage drivers.
  I had limited success by starting in safe mode and (re) install the drivers downloaded from the manufacturer's website.
  Here is the link to help you: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3356622&taskId=135&prodTypeId=321957&prodSeriesId=3356620&lang=en&cc=us

  I hope I helped!
  Brian

• opening of Skype call causes blue screen

  ORIGINAL TITLE: Urgent... Help, please... Blue screen

  When I'm about to open Skype call my laptop screen always turn blue, then I downloaded view blue screen then he told me that my driver is broken and he is ntoskrnl.exe, how can solve this problem the bluescreen on always keep coming and then restart. He said something as preparation to dump...

  Help, please. because I just brought this computer... Please help... How can fix the ntoskrnl.exe driver?

  Hello

  Check with the help of Skype and their forums, as it may be known issues.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  ------------------------------------------------------------------------------------------------------------------------------

  Ntoskrnl.exe is a component of Windows which means than anything else he has led astray. More likely
  the root cause on top of my head are the WiFi (wireless) or network (wired) NIC drivers. Check with
  system manufacturer (manufacturer of motherboard for customized systems) or the actual manufacturers. (See
  driver update methods below.)
   
  ----------------------------------------------------------

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) for a second or less
  the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from
  the wer files created by the Windows Error Reporting (WER) of the operating system component
  whenever an accident occurred. AppCrashView also allows you to easily record the list of accidents
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ========================================================================

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• service interactive message caused the screen to go black

  This interactive Service Message has popped up for the first time today, 8 / / 20/2012 on my PC running Windows 7 Home Premium 32 bit sp1. I clicked on the option to see the message and the screen became black as he looks with my external monitor is on, but the PC is turned off or put into operation. Because he was in a stable condition and I used it I do not understand why a message would be to shut down my PC (laptop). Fearing it was a virus, I turned off the machine.

  I'm now back to start and expect to go down mode without failure due to an abnormal termination.

  Is this typical behavior of this messaging service? An another small pop-up said that "a program had stopped but could not determine what program it was."

  Hi Tiger,

  1. what exactly was mentioned in the service message interactive pop up?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links:

  Method 1:

  Scan your computer by using the Microsoft Security Scanner by clickingDownload now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, follow the next method.

  Method 2:

  Step 1:

  Start your computer in safe mode with network and check with the question:

  Startup options (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem persists, then follow the next step.

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• How can I move an application to another screen

  How can I move an application to another screen

  Hold down the icon until they start to move. From there, you can tap the application that you want to move and drag it to the left or right to access the screen you want. Once you are finished, press the home button to complete the task and turn off the wiggle.

• Satellite L505 - screen flashing, but another screen works

  I have a problem with my laptop, the screen starts flashing black. I still can't see what normally it stops when I open the screen to the angle_ of _maximum or when I apply pressure above the power bar on the round screen hinge in the middle of this one I used for my laptop includes it is sometimes screen_ sometimes so I would like to know what is the cause of the problem.

  I have excluded the VGA laptop works because normally if I connect another screen, so it is with the backlight of the screen, LCD or some cables or connectors or the inverter is - anyone have any idea?

  Please help and reply soon

  Hi danysafi,

  You're right: the problem is since the screen backlight, LCD or cable LCD but who should we check this without diagnostic tools?

  With other words in this case you need help from an authorized service provider because they have diagnostic tools to check the special hardware. In my opinion that's the easier and faster way, if your laptop is under warranty, the repair is free.

  Last but not least, you can find a list of all FSA official website of Toshiba. :)

• Skype messages are not in order

  Very well. Since last night, Skype messages are not in order.
  I say, it's not wise to mobile. It's on a laptop.
  I have Skype restared. Nothing.
  I have re-installed Skype. Nothing.
  I disabled the YSC. Nothing.
  Re - syc the times. Nothing.
  I erased from history. Nothing.
  I have deleted cookies. Nothing.
  I have disabled cookies. Nothing.
  
  Now, what are all the options that I have read in previous posts. But now, it's in 2015.
  It gives me a headache, guys.

  http://community.Skype.com/T5/Windows-desktop-client/Skype-glitch/m-p/4231352#M391941

• No puedo enviar por Skype messages a una cuena msn

  No puedo enviar por Skype messages a una cuena msn sell me enviado pero no envia to ayuda: c

  Is works thanks for NO help me.

• Satellite A200 - error message on Bule screen when I do something hard

  I have a laptop is the details below

  * Name model: Satellite A200 - 11 C *.
  * Model No.: PSAE0E-00X00KAR *.

  I installed Windows XP (Service Pack 2) on this subject. After installation, when I try to play video file or search for viruses or to work for a long time it displays a message on blue screen. The Message is as below:

  * A problem has been detected and windows has shut down to avoid damaging your computer
  * If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: *.

  * Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.*

  * Check with your hardware vendor for updates to the Bios. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.*

  * Technical information: *.

  * STOP: 0X0000008E (0XC0000005, 0X00000000, 0X8057064A, 0XA95718B8) *.

  Starting from physical memory dump *.
  * The physical memory on the drive of dumping: *.

  According to the message, I update the WOOD, but I still facing this problem?
  Waiting for your response.

  Russell

  E-mail: or * [email protected]

  Hello, Russell

  A few days ago, I have similar problem on my Satellite P200. After you install a third-party application, I got BSOD every time when this application loads. I tried anything possible. To start in safe mode and change the boot options, OS restore to an earlier time using System Restore tool. I also tried to remove application preinstalled in safe mode but nothing has helped.

  In the end, I installed OS using recovery DVDs.

  So, in my case, I was sure why this happens. What is with you? This happens if you use some applications? What player and antivirus do you use?
  The same happens when you try to use Microsoft's Disk Defragmenter?

• D3 - another screen can be chosen to be the home screen?

  I would like to only one of the five screens other than the Center to be my home screen. Is the center of a "locked" by default so that another can not be chosen to be the fief? Could not find a way to choose another screen.

  Unfortunately, the homescreen has no area of parameters so that you can not change this. the only alternative if it's something that you can't live is to use a 3rd party launcher on the market like Launcher Pro. However, you lose the ability to use some of the Motorola widgets by switching to another Launcher.

• HP Officejet J3680 All-in-one: error message on the screen of the printer cartridge

  The message in the window of my printer says cartridge error. I opened the door of the cartridge and makes sure that the cartridges were safe. Message on the screen of my computer says low ink. If the ink is completely out, the printer fails to print and display cartridge error? The cartridge is fairly recent, but it is a remanufactured cartridge.

  I guess that if the printer who copied the cartridge was okay   Then, I got a popup asking if I had problems printing with Windows 10.  After several entries and finally get a prompt for HP Assistant something or other I was finally able to print. I guess that the printer was not recgnizing Windows 10. Now, he recognizes it and is the fine print. Thanks for your comments.

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• HP-ac002TU: cannot project to another screen

  My laptop Hp-ac002TU, serial number 5CG60957LM

  I just install with windows 8.1 (64-bit), the problem is that we can't project to another screen. There is no option to duplicate or project only, etc. There is no Graphic options so straight don't click dekstop.

  Please help me!  In my device menager, adapter display is Microsoft Basic display adapter...

  Hello

  First of all, make sure you install the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71340.exe

  When the installation is complete, restart the laptop.

  When windows has reloaded, try to install the driver package Intel gpu on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71341.exe

  Kind regards

  DP - K

• My aspire e1-510 begins my email password screen. How can I change to another screen?

  My aspire e1-510 begins my email password screen. How can I change to another screen unrelated to my email?

  Describe what is happening better because nobody will understand your problem.

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.