Internal modem M30-206 has stopped working

Similar Questions

• Illustrator CC 2015 has stopped working on Windows 10

  So, I just upgraded my Windows 7 PC (everything was fine before) 10 Windows, everything seems to work fine with my CC Photoshop and Fireworks, and then I tried to open my illustrator with Amnesty International and the program has stopped working. I tried to run in compatibility mode and it won't work too? I did a repair, and I told him it's a compatibility issue. Is anyway to fix this?

  
  Thank you

  naradhipak,

  You may want to consider a new install of Windows 10 and then reinstall the application (s). He has worked in this case:

  Adobe Illustrator CC 2015 lance is not on Windows 10 Pro.

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Configfree has stopped working" error on Satellite L300 Win7_32bit running

  Full text message * task status bar Menu ConfigFree has stopped working *.

  Whenever the modem USB (key Huawei E352 HSPA USB) connects this error. Running Win7 Ultimate 32 bit.

  Google search: some believe it is a virus, others believe that it is a matter of hardware/software.

  How should I do? Any ideas?

  Thank you

  It is not easy to help you because you use external third party material. I put t think ConfigFree is tested as intensely with all sorts of external devices.
  Why this may be just speculation. Still is it that ConfigFree is not necessary to run then I recommend to leave ConfigFree before starting to use your modem. How to fix? Good question. What you can do about it? Not much. Perhaps to find new version ConfigFree and reinstall in the hope, it will be OK. In my view, no more than that.

  I use ConfigFree constantly with LAN and WLAN networks, and there is no problem at all.

• U920T satellite screen has stopped working

  The screen has stopped working on a relatively new U920t. It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  Any help in this matter would be appreciated.

  > It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  This means that there is nothing wrong with the graphics chip on the motherboard, but without doubt the connection between the screen and map mother isn t OK or maybe the internal display is faulty.

  Is that it is a hardware issue and you should contact Toshiba authorized service provider in your country for repair.
  If the warranty is valid, the laptop must be repaired for free.

  Welcome them

• Display has stopped working on Satellite A300

  Hi guys,.

  I have satellite a300 PSAg4a - 02500 m laptop. All of a sudden the display has stopped working on the laptop. I tried to plug in an external display, but it does not work also.

  I can't even see the bios screen not. Laptops normally, I hear no beeps during startup, just the fact that there is no display.

  This laptop has a M86 ATI graphics card 512 MB. Its out of warranty.

  All had a similar experience. Is it possible to know what could be the problem.

  Any suggestions would be helpful.

  Thank you

  Hey Tama

  I'm afraid there is a problem of serious material with your laptop from m.
  I like the graphics card problem.
  Usually if the internal screen would be defective, you should see all the external display. This is why I think you GPU is affected.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• Toshiba 320 GB external USB HDD has stopped working

  Hello

  Recently this evening my external hard drive has stopped working. I can start it and the blue light shows, but it seems that the arm of reading or the mechanical part is stuck or does not start. It has a very low and repetitive clicking noise.
  Before I used to get a strong enough * Click * when starting and now nothing. Nothing does load in windows either, and remains undetected.

  I thought that I could send to repair if it's arm which is broken or needs other than tighteneing as, it's a pretty desperate situation that recently, I cleaned my computer and used the external hard drive as back up, with all of my work for the last 8 years on this subject...

  And I can't afford a recovery of data of 300 books, either.

  null

  Possibly the HARD drive died completely. I mean it might be possible that a head crash could cause this problem.
  My HARD drive died in the past, it was a laptop internal, HDD, and before that the HARD drive is dead, I noticed a strange rattling noise.
  After a restart the laptop the drive HARD was not accessible
  Well, HARD disk crash is not an uncommon problem and it always happens
  So, in most cases, it s also should back up the data twice. That is to say: on DVD, CD, etc.

• Satellite A305-S6825: WLan has stopped working

  I'm in the United States. (I posted this message earlier)

  #1-I just bought Toshiba notebook a month or two ago with Vista Premium SP1.
  A day ago when I turned on the laptop, I got a notice to the effect:

  Windows Wireless Lan 802.11 Extensibility infrastructure has stopped working.

  -> Are looking for a solution later (recommended) the next time that you start the system
  -> Closed

  Those who were only two choices. I think I clicked on the first "search for a solution later.
  When I turned on laptop today, I got the same message.

  Anyone know what could be wrong with this new laptop?
  I use the wireless to enter IE7 and type your message.

  My husband and I are elderly and not too familiar with computers or computer language so if anyone has an answer, please make it simple enough for us to understand.

  We hope that this new laptop is not already broken.
  We cannot afford to buy another computer or have it repaired.

  #2-we tried to send questions by e-mail to MS, but they asked the PID. We looked in Control Panel and system (I think) and typed in the PID of there (OEM number), but it would not recognize MS.

  Can someone please help?
  Thank you very much.
  Alice

  PS: We have the DSL cable attached to our desktop (modem/router) and use this Toshiba laptop with modem/router of this office to get online (don't know if that is the correct terminology that someone else connected DSL, etc.).

  Hello Bob

  I agree with Kody and I think also there is a software problem or the WIFI network is not properly enabled. I use the European model of laptop, but I don't think that there is some difference of laptop models to the United States.

  If you want to use the WLAN, it must be enabled correctly. At first make sure that the WLAN switch is placed in position ON. The WLAN led should be on. After doing this using FN + F8 key combination to activate the wireless network card. When you press the FN key and keep down. Maps flash in high must be indicated. Always keep the button FN, but press F8 and select Wi - Fi ON.

  So now the wireless network card must be activated, and you should also be able to connect to your WLAN.
  If the problem persists, you can try to roll back the OS to an earlier time (when the network WIFI works well). To do this, you must start System Restore tool. Choose different restore point and to the next day when you think about the WIFI worked well.

  Sorry, but for now I have a better idea because I don't want to confuse you more than necessary.

  Have a good day and I hope that WIFI works well again.

• Satellite C665 - Ethernet adapter has stopped working

  Hello
  A few weeks ago, I noticed that the ethernet adapter has stopped working. It has disappeared from the Device Manager, and I can only access internet by wifi.

  When I turn off wifi and connect the ethernet cable (which connects to the modem) nothing works.
  I tried to restore the windows settings, but that didn't work.

  Can someone help me?

  It is possible that the LAN module is defective.
  All you can do now is to check and install the original recovery image and check the functionality with the factory settings. If the problem persists it is definitely hardware problem.

  I think that it is not worth to fix it if you can continue to work with WLAN connectivity.
  What do you think of this?

• Satellite L300 - 2CL - built in mic has stopped working

  Hello

  When I bought this computer (sep-09) everything worked fine. Then in March (I hade it idle for some time), my built in mic has stopped working.

  What eles is fina, and I scanned the Web for solutions and tried to install the new drivers, unistall them, all possible boots, disabel and restart, but at most I just get a static sound of my recordings of test.

  I use win 7 home pre, but the problems started when I was with Vista. Now, I am of ideas, and my friends on Skype develops enough not to hear me.

  Is that what I can do to get the microphone working, or should I buy a headset?

  Grateful for help
  Hugo

  Hi mate

  To be honest, I would use a helmet because helmet still provides a better speak of quality.

  But the internal MIC is part of the webcam and the microphone is controlled by the software of webcam too.
  Please launch the webcam software and go to settings.
  Then, choose Audio tab.
  Here, you must increase the volume to maximum.

  Welcome them

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer has stopped working vista 64-bit

  This is a random error that continues to be. I wonder if I want to seek a solution, when I do, it seeks a minute then quits or restart the program, when I do closes. It's random, seems to happen with windows internal programs, it happens more with I click, right happens again and again, but I'm going to work if there is more then a why to open a program like: go to control panel and double click on Device Manager, I get Windows Explorer has stopped working, but I can't get to the system hardware tab Device Manager and it opens fine.  I can do a restore and I don't know that I don't have a virus or spyware on my computer. I can't say at this point when it started, cause I just thought it was a freak thing.  Maybe something to do with the UAC.  There must be an easy fix for this. Please help, going nuts about it.

  Hello

  The problem is probably AVG which has caused a lot of problems lately for 8.x and 9.x.

  Frankly, I would delete it. Download but do not install the replacements until AFTER you remove AVG
  and restarted.

  For ALL - download - SAVE - go to where you put it-right-click on Reboot - RUN AS ADMIN - when you have finished

  AVG removal tool
  http://www.Avg.com/us-en/download-tools

  -------------------------------------------------

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Installer.exe has stopped working

  I have the usb of ZTE AC8700 EV - DO wireless modem. It worked fine in xp and vista, but in win 7 ultimate, whenever I try to install or uninstall, it shows a msg that "Installer.exe has stopped working" and the installation program ends.
  even though my device works under the windows built-in network and sharing Center but I can not install software from the company because of Appcrash. This is a prob of service install?

  any expert can help me?

  Hi friend I have solution for the EVDO runtime error.

  1 - Open Control Panel

  2 - go to option of regional languge

  3 - set the language (English-United States)

  4. now you are able to connect via evdo dialer.

  This trick works on my system. Hope it helps u too.

• "Application has stopped working" - in windows 7 double started with windows server 2003.

  I did a system to dual-boot with windows server 2003 and windows 7 both 32 bit.

  Server works well, but in windows 7, not a single application as 'MS office', 'Adobe Reader10', "mozzila FF 17', USB modem software etc. can be installed." Application has stopped working-check online for the solution, close the program "-l' display message."

  These applications have been executed successfully on the same windows 7 installed alone, stand not to dual-boot.

  As for example, in the case of Mozilla, I get the following details of problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Installation of Firefox 17.0.1.exe

  Application version: 4.42.0.0

  Application timestamp: 5080c0b6

  Fault Module name: Firefox Setup 17.0.1.exe

  Fault Module Version: 4.42.0.0

  Timestamp of Module error: 5080c0b6

  Exception code: c0000005

  Exception offset: 00029000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: c828

  More information 2: c8281d65ef26473d0d73e61539f36991

  3 more information: c4b2

  Additional information 4: c4b2e9bb96fe79d0a8d8b1d891ab6cf4

  These BONES are compatible?

  What is the solution?

  Help, please.

  Thank you...

  Hi Sounak,

  Thank you very much for the detailed information.

  You did changes to the computer before the show?

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know the result.