SL500 - integrated UMTS modem is not recognized

Similar Questions

• Tecra A10 - 14Q: 3 G UMTS modem will not work with Vista 64 bit

  Hello

  After that Vista 64 bit drivers have been made available, I changed the hard drive installed and a clean installed Vista business, as well as the drivers of Toshiba posted.

  All right, except that the Wireless Manager accepts the SIM card, PIN code, but shows that "Disabled transmitter" ('sender deaktiviert' in the German version). I can't find any idea where the problem is.

  In the window manager of 3 device G modem is fine and functional, the PIN is correct and accepted, and I have the latest drivers installed.

  Judgment of the laptop and to the hard drive me back to Vista Business 32 bit and UMTS card works well?

  Any help to solve this problem is appreciated.

  Kind regards

  YaGru

  Thank you vey much for this return of experience and that you share this information with other people here in the forum.
  I think it might b all useful for other users encountering the same problems.

  See you soon

• Auntie photon more modem is not recognized and installed

  Hi all I m facing problem to install the photon Auntie more the modem on my vista. I checked on other laptops with xp or vista and found it works well. but not on the PC laptop mid. How to solve the problem. Please help me

  Hi jabardast,.

  1. what happens when you connect it to the laptop?

  2. you receive an error message?

  3. are you able to use other Usb devices on the laptop?

  See the link below for AUNTIE Photon Pro FAQ and check if it helps.

  http://www.tataphoton.com/Tata-photonpro-troubleshooting-tips.aspx

  If the previous step fails, then join the Center Tata Photon for more information.

  http://www.tataphoton.com/t-customercare.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• XPS 8700 Fax / Data modem not recognized after mode 'sleep'

  I have an internal modem installed pci-e.  After the system goes into sleep mode, the modem is not recognized.  Resolution is to draw the pci-e card, restart the system, then stop again, re - install the Fax/data modem and it is recognized, until the system goes into sleep or stop mode.

  How can I keep the device recognition, didn't have to pull on the map and re-insert/install whenever I start?

  When I look at the Device Manager after the mode standby or shutdown, the device will display hidden and not connected to the system.

  System BIOS is updated to the current 10 A

  Always include the version of Windows in your messages.

  You may need to change sleep settings and possibly disable hybrid sleep by using the Windows power options, and/or adjust the power options in the BIOS Setup.

• Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

  Hello

  I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
  It seems that the built-in webcam is not connected.
  Thank you

  See Sony support site or their forum, this is a Sony webcam

  And no this isn't a feature of device, or something that should appear in the devices & Printers

• Cannot create a custom SOA Gateway-> error integration interface: meta-method type hash_of_lists not recognized as a type of compatibility V1 (cannot mix options v1 & v2)

  Hello

  Steps to create a custom integration interface

  • Download the model of virtual machine of EGGS and the oracle Installer 12.2.4 did with success (instance VISION)
  • Tired of creating new interface but I got an error like below
    • Could not find Class / MethodMaker.pm in @INC (@INC contains: /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/xml/orc115)
  • According to the oracle documentation "Oracle E-Business Suite integrated SOA gateway Implementation Guide" then as follows to install the perl module.
  • After that, when I tried to return the script get errors like below

    • Meta-method hash_of_lists type not recognized as a type of compatibility V1

    • (cannot mix options v1 & v2)

    • to the /u01/install/VISION/fs1/FMW_Home/webtier/perl/lib/site_perl/5.10.0/x86_64-linux-thread-multi/Class/MethodMaker.pm of line 24

    • BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Loader.pm line 691.

    • Compilation failed to require online /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Annotation.pm 46.

    • BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Annotation.pm line 46.

    • Compilation failed in require in /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Parser.pm line 172.

    • BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/perl/FND/irep/repo/Rep/Parser.pm line 172.

    • Compilation failed in require in /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/bin/irep_parser.pl line 37.

    • BEGIN failed--compilation abandoned at /u01/install/VISION/fs1/EBSapps/appl/fnd/12.0.0/bin/irep_parser.pl line 37.

  Can someone solve this problem.

  Thanks in advance

  Have no experience with this, but MOS Doc 1400165.1 may be useful

• Why do you put a restriction on facebook in my browser not recognized as its driving me crazy. His facebook and bigger than anything

  recently I noticed that when I log on facebook there is an icon near the lock of the top bar which restricts Facebook. you tell her not to work on every page on fb, connect you to. Facebook is so great and yet it says the icon is there as the https for facebook is not recognized as a place sure enough site. how ridiculous. its as big as the planet facebook. Firefox can solve this problem and remove and accommodate somehow better facebook because if this is not fixed I have to go to use google chrome and I don't want to. its driving me crazy. Thank you

  This thread is a bit confusing! I'll try to summarize.

  Block some content unsecured to secured pages is a trend; I think that Internet Explorer has done this for a while.

  Content integrated into the pages of Facebook is supposed to have already a secure URL, according to developer FB, but that is not running or this problem would not exist. I hope over time this problem will disappear.

  For now, you can use the extension of the toggle joint active content quickly turn your unsecured on and outside content protection. This is a global setting, not site specific, so it's best to leave it on as much as possible.

  After installing the extension, you should find a new icon in the bar of the add-on: an 'A' on a green or red square. Green means Firefox protects you, and red, that it is not.

  If the icon is not in the bar of the add-on (which you can also show or hide by pressing Ctrl + /), you may need to drag it out of the Customize dialog box and drop it in a perfect location. You can open it using one of these:

  • Right click on a zone empty of the tab bar > customize
  • Press the Alt key > menu view > toolbars > customize

  You can get configured as you wish?

• Time Capsule not recognized after the replaced logic board.

  Time capsule is not recognized

  I too am in the same "boat" as 'bruf' and 'Pitbullover' my Mac Book Pro had a card failure logic as well as graphics - warranty - replaced but now the MBP does not recognize Time Capsule.  Directly linked to the time via an adapter for MBP port capsule.  It was working OK before the Mac went to repair.

  I followed the great suggestions of LaPastenague (thanks for all the time and expertise you provide other users of Apple).  Tried the factory reset button, but no result. (By the way there is always a flashing amber light on the TC - is this usual?)

  Checked the Finder - showed the distance disc - but no mention of a time Capsule.

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  I will follow this thread with interest in the hope that the wonderful 'gurus' out there can suggest a solution.

  With satisfaction!

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  Even if it is not used as a router, it is usually easier to him have plugged into your router main and fulfilled.

  What model is the TC?

  This modem do you have? Brand and model please.

  the time Capsule.  Directly linked to the time via an adapter for MBP port capsule.

  Exact details... which adapter... has this crush on ethernet?

  Or Ethernet USB...?

  It could also be a USB wireless... but probably not.

  Have you tried the manual configuration method?

  https://discussions.Apple.com/message/29612657?ac_cid=sa123456#29612657

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• Satellite M70: HARD drive not recognized external - various XP error messages

  Hi all

  I have a Satellite M70 and I have a Western Digital external hard drive.
  Initially, it worked great, I was able to put my large collection of music, etc. on it and run a computer off to save space on my integrated HD.

  But recently I had problems with XP not recognizing HD or be able to write in it. It appears in my computer, then disappear, often randomly when I write new files to it.
  I reformatted the hard drive to NTFS as it ran originally as FAT32.

  I updated my BIOS as well, but I'm out of ideas.

  Anyone else had similar problems with XP?

  Thank you

  Will be

  Have you thought about external HARD drive failure?
  Perhaps failure of HARD drive and, therefore, it cannot be recognized correctly.

• Satellite Pro A10 - Modem does not

  I recently reformatted my laptop using recovery discs. The internal modem does not work. It is recognized by the computer, but I get the message "the port that the modem is attacahed to could not be opened." This can be the result of a hardware conflict"when I query the modem in Device Manager. Also, in the Device Manager there is no indication of being recognized COM port. What can I do?

  Hello

  First I recommend you remove the modem from Device Manager, and then reinstall the modem driver.
  It is not necessary to assign any COM ports manually. After installation of the modem driver all have to be configured automatically. Do not forget that you are using the modem driver good for the country where you live.

• SP A10 - Error 633: the modem is not installed or configured for Dial-Up

  I've already reformatted the hard drive and the utility CD to reinstall the modem driver. Anyone got tips on how to solve the problem? An external modem would solve it?
  Either way, it's a satellite pro A10

  Hello

  If the HARD drive is formatted, use the recovery CD and reinstall the OS. After that, the modem must be recognized and properly installed. After that, configure Dial connection and check the modem. If the modem is not defective, it should work.

  The strange thing is that there is Error 633 which means: the port is already in use or is not configured for remote access remote calls.
  Please check this interesting site http://www.modemsite.com/56k/duns633.asp.
  If there is no success please write again.

  Good bye

• Satellite A30-504 modem does not

  Hi all

  Old old old Satellite A30 504 my father had problems of modem for quite awhile. Here are the symptoms exposed:

  Modem is recognized as "TOSHIBA Software Modem AMR" and classified works correctly. However, when you query the modem, I get the following message:

  + The port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. +

  Settings of resources:
  Range of e/s-2400-24FF
  E/s series 2000-207F
  IRQ 7
  (I can't change any of these settings)

  Needless to say that the modem does not work.

  Has anyone ever met such a problem before? Does anyone know of a way to fix this? I really don't want to get a PCMCIA modem for this laptop, so any help would be greatly appreciated.

  Thank you in advance!

  Dan

  > I have reinstalled Windows XP twice
  How? Do you use the restore disc Toshiba for the installation of Windows XP Home edition?

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings