slow to connect and browse the internet

Similar Questions

• HP 15-f003dx: robotic sound on laptop while listening to music and browsing the Internet

  Hello

  I have a HP 15-f003dx and I have problems with the audio driver. Whenever I watch videos or listen to music while browsing the Internet, everything looks like a robot, and it's really bad. I already reinstalled the driver, updated the BIOS and tried the system restore and reformatted. Nothing else has worked.

  Here are my specs below:

  10 64-Bit Windows Home

  Processor: AMD A6 - 5200 APU with Radeon HD graphics card

  8 GB RAM

  Audio: Realtek High Definition Audio

  I'm running out of options. All the solutions to the current problem would be great, thanks.

  Hi @REL1983,

  Thank you for the update.

  I'm glad that the store has been able to solve the problem for you.

  Execution of the troubleshooter is a step I have provided, if you agree that it is your problem, you would be useful to the community by choosing accepted the solution to enable other posters locate information with greater ease.

  Thanks in advance.

• site-to-site and browsing the internet

  Hello

  I have a simple question. We have to buy two asa5000 devices and connect them via the fixed site-to-site tunnel. One side will use the ADSL modem in Bridge mode. My plan is to use PPPoE auth on port wan asa. In addition, it is important allow users in each office to use internet (browsing) via the same port/IP, that we will use to set up a tunnel. I recall that it is possible, route them forward to the other and rule IPSec protects only the site to other traffic. Each site traffic Web will not be IPSec protected and will use the default route?

  Is it possible, theoretically at least?

  will also sometimes tunnel on the side drop ADSL IP is static but the DHCP server (allways Gets the same IP address of the DHCP server)

  TNX

  Quite possible, you can have a site to site VPN and use the same IP for Internet browsing.

  If he gets the same IP address all the time, so no, tunnel should not be.

• Unable to browse the internet for the VPN (ASA5505 running 8.3)

  We have improved our ASA 5505 to 8.3 firmware image (2) and we have a working VPN configuration (customer VPN in Windows can connect and browse the network of the company as well as their local networks [split tunnel seems to work in this regard]).  However, some time connected they are unable to also browse the internet.  In our configuration of 8.2 (1) we have done 'something' to allow remote users to browse the internet at the same time, but apparently this is not transferred in the upgrade.

  I'm sure it's a simple nat our order routing, but it can't know.  I've gotta hit the road now but will post our config this afternoon if no one knows the "secret" to do.  Ideally, internet traffic to remote users out of their internet connection and not be achieved through the office.  We understand the risks associated with it.

  Hi Scott,.

  To the best of my knowledge, I don't think that l2tp over IPSec supports split tunneling. If you use the Cisco VPN client, you should be able to get this working.

  What we can do in this case is to set up turn on the SAA for these vpn clients. Please add the commands to run below:

  permit same-security-traffic intra-interface

  network of the NETWORK_OBJ_10.0.0.0_27 object

  dynamic NAT interface (outdoors, outdoor)

  Let me know if it helps!

  See you soon,.

  Assia

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• BEFSRU31 - connected to the router, but can not browse the internet.

  Hi, I had this problem in the last three months. I share a Linksys BEFSRU31 with my friend. However, once or twice a week, or even more frequently, the router suddenly ceases to send data to my computer. However, my roommate still receives data. So I'm unable to browse the internet even though I am connected to the router and the router gives me an IP address. The only solution I found to do this is to reset the router, which is annoying, because the router is in my friend's room and I don't like to disturb whenever this happens. The ISP is Optimum Online, and I'm on a cable connection 8 MBit. Can someone help me please this problem? Thank you for your time and your collaboration.

  Message edited by EvilBrownie on 18-01-200708:47 PM

  
  

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Connect a Vista PC (host) with an XP PC in LAN and share the internet connection.

  I connect to internet using 3 different notebooks with Windows Vista with a wireless connection to a router and the DSL modem. I have a desktop PC XP computer in a secluded spot in my house, who does not have a wireless card. When I want to use the internet in Office XP, I connect it to a laptop using a LAN cable.

  I was able to do that with 2 of my notebooks (set up the network and share the internet), but with the third Vista notebook, desktop XP can't get the internet connection established. I was not able to detect which is the problem.

  First question: clues to debug this problem?

  Second question: I would like to start over again and configure everything again with this third book. How should I proceed?

  Turn on Internet connection sharing on the Vista wireless network connection.  If asked what to use for the home network connection, tell him to use the connection to the Local network. Then check the State of TCP/IP on both computers:

  1. On the Vista computer, right-click on the connection to the Local network, and then click on status > details . It must show:
     • IP address: 192.168.0.1
     • Subnet mask: 255.255.255.0
     • Default gateway: no
     • Server DNS = none
  2. On the XP computer, right-click on the connection to the Local network, and then click on status > support > details . It must show:
     • IP address: 192.168.0.x (1<>
     • Subnet mask: 255.255.255.0
     • Default gateway: 192.168.0.1
     • = 192.168.0.1 DNS server

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• PSAA9 satellite A100 - unable to browse the Internet

  Hello

  I reinstalled the operating system on a friends computer laptop A100, installation of WINXP pro.

  After I installed, I noticed that a lot of missing drivers so I scoured internet and downloaded most of them. The problem I have is that the ethernet connection seems to not work properly. I installed the driver on the toshiba site and hooked it up to a test network to my polytec.

  On this network to test an internet connection is available, but the laptop cannot browse the internet! I can ping other PC networking on mobile Internet sites and ping but cannot browse their IE. Other network PC cannot ping the laptop automatically obtained IP address.

  Any ideas what's happening?

  Hello!

  Have you tried another browser like Firefox? I don t use IE because Firefox is much faster and I can't get a large number of modules.

  In addition, you should try to disable the firewall on the laptop. Maybe it s blocks the internet connection or the internet browser.

  Last but not least try to use a static IP address. You can change this in the TCP/IP settings.

• Satellite A120 - loss of Performance after browsing the internet

  Hi all, Im currently new on Toshiba laptops, just got my first one. But this question is for my brother. There an A120 laptop with windows xp. His laptop is generally very well outside of slow down after browsing the internet for 5 minutes of the ish. Initially he sails very well, but then all of a sudden slowing down, but it's not just the internet, the laptop everything slows down, turning off takes a lot of time just like any other process. The internet works fine on all other devices, IE. other computers laptops, xbox, mobile phones etc. His ISP has confirmed that there is no problem with the internet.

  Anyone have any ideas? He has already reinstalled XP

  Who knows what's wrong there. Install CCleaner and clean OS every time before you turn off laptop.

  Might be time for a clean installation of the new OS if your brother use it for years.
  You know, we don t know what is preinstalled on it, which is running in the background and what personal configuration on this machine.

• I bought the latest Samsung computer some three weeks ago. My laptop is very slow when I go on the internet but other computers are fine.

  Hello

  I bought the latest samsung computer (notebook 9) three weeks ago. My laptop is very slow when I go on the internet. I have three other phones in my house and they all work very well. Is there any configuration that I should look because the guy told me that it is all the pre-configured.

  Thank you

  original title: network connection

  Hello Pierre,.

  I suggest that you look at this article from Microsoft that can help solve a slow internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow

• My Firefox browser is unable to browse the internet

  Hey there! When I use Firefox to browse the internet I just get a screen that reads "it works!" Thoughts? I'm happy to send a screenshot of the screen.

  It started when I installed the module for HTTPS Everywhere.

  Problem solved. Embarrassing, I simply relied on tools "Clear recent history" and all selected. It works fine now.

• HP 15 Notebook PC: Laptop stops to connect wireless to the internet

  Laptop not connect wireless to the internet.  In this intermittent case. Called HP several times. Will work and then happen again!

  My computer still under warranty.

  Hi @Hoopla1 ,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediatelyassist you with the wireless card.

  Thank you.