Smart touch screen

  1. I recently had a PC laptop Hp Pavilion Touchsmart. I had a crack on my Pc and the touchscreen unresponsive. And it's been very difficult for me to replace. Please how can I do for the replacement and I need to know the actual cost of replacing another. I would be sincerely grateful if any of it can help me with this. Thank you.

Irene wrote:
Thank you very much the product label is
HP pavilion touchsmart Pc 14 laptop 14-n004sia and my product no is E9N61EA #BH5.

HI Maria

Thanks for all information

This is yourproduct.

This is the repair of your model.

Your model has to come Billboard as a unit of the whole display Assembly: 35,56 cm (14.0 inches), high definition (HD) WLED, SVA BrightView TouchSmart screen slim Assembly intended for TouchSmart from HP Pavilion laptops.

Go through Page 3, 19, 88, 89, 90, of the maintenance manual.

This is the number of spare HP (varies with the color of the back cover)-

Aluminum with black midnight: 734414-001

Red Flyer: 734410-001

Bay of Goji: 736814-001

Bay Hazel: 736815-001

Black mineral: 736813-001

White Pearl: 734409-001

Raspberry: 736816-001

Purple delight: 734412-001

Revolutionary Blue: 734411-001

Silver: 734413-001

Since the specifications indicated in this product guide, I guess the color of the product is Black mineral.

Here are some online sellers for the sale of the unit mounting of display with HP 736813-001, spare part number you can go although it has an estimate of the cost. I think it can come around $200:

Amazon

Amazon UK

Hope this helps solve your problem and move forward with the replacement.

Thank you

CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.

CLICK ON BRAVO IF YOU LIKE MY ANSWER *.

Tags: Notebooks

Similar Questions

  • HP Envy Smart Touch: HP Smart touch screen collapse

    The screen on my laptop is falling apart and disconnected. It started out small and now is so bad that the display is twisted.

    Any help or repairs to this issue, as it seems quite common in this model?

    Hello @Awatson,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I read your post on the issue of the display and wanted to help you!

    Based on the information you provided, you can consider contacting phone support of HP, additional hardware options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • HP ENVY Smart Touch screen upside down

    Somehow, I hit a few buttons and now my screen on my laptop is backwards. How to switch this back?

    Will, achieve, welcome to the forum.

    You have to press on and hold down Ctrl + Alt while you press the arrow pointing upwards.  This should toggle your screen to the correct orientation.

    Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

  • Smart touch

    Thise smart touch screens get dirty, how can I cleam mine?

    boot says:

    Thise smart touch screens get dirty, how can I cleam mine?

    Wit, your laptop is off, use a cushioned soft, lint or Microfiber cloth. Wipe the screen in gentle way to remove stains and fingerprints.  Alternatively, you can buy the screen of a PC shop wipes that are made for cleaning laptop screens.

    Best regards
    ERICO

  • How to activate the touch screen HP Pavilion Touch Smart (10-e010nr)

    The list of features on the HP website says that this laptop has a touchscreen, but the first time that I booted up (new with box), it doesn't seem to work.  I have run Windows Update and installed all security and optional updates.  I also installed all video updates from the HP support page.  What can I do else?  It has touch screen or not?  It had pre-installed Windows 8.1.  Thank you!

    Last night I did the reset complete back to factory settings... erase all files and reinstall Windows 8.1.  It took several hours.  It did not touch screen feature.  I also tried pressing F2 at startup and running the diagnostics on all of the touch screen.  He failed and gave me an error code.  As the computer is still under warranty (I don't have possession for another week yet), I talked to HP technical support on live chat and gave him the error code.  He said he must be sent to HP for service.  Since I live on a military base that, he told me that I must call their number of military sales to the United States.  When I called them, they were closed.  I won't and I'll try to return it to the base exchange where I bought it.  Thanks for trying to help me solve this problem.  I guess that's just DOA.

    Andrew

  • HP Envy Touch screen Smart questions

    I bought my new laptop from best buy about 2 months ago and everything as I had first, there screen problems. If the screen is barely touched or moved glitches and goes black. I have to go down and lift it upwards. Sometimes severel times so that he can see again. Is this a common problem? And how to fix it? My laptop is

    HP - ENVY TouchSmart 17.3 "touch screen laptop - 8 GB memory - 1 TB hard - silver modern model number m7-j010dx

    This isn't a common problem.

    Contact HP for warranty service.

    Let the representative will send you an email or talk to know that you were here at the forum.

  • Win 8 on samsung ativ smart pc - touch screen problem

    Hi all

    all of a sudden, my touch screen doesn't work - or better that partially - working: I use the s pen with no problems and even at boot I always type my password using the key, but once I'm connected, it no longer works.

    facts: I always say / connected the keyboard as requested only when the tablet was turned off. I've updated to last 8 version latetly victory (I didn't work before or after)

    someone can help me or has had the same problem?

    many greetings

    Nilli

    Hey there,

    Thanks for all the tips and tricks - in the end I discovered on my own:

    It seems that there are two kinds of adjustment: the windows ones like the Samsung ones. Not like WiFi, where they are connected and power applications light / each other, those for touch are not.

    I accidentally turned off the touch in settings of Samsung (which were hidden in single applications, not visible at first glance that I have disabled the 'Samsung Quick Starter') and I only checked the windows ones, which were very good.

    But maybe it helps other people!

    See you soon

    Lisa

  • T450 problem touch screen

    Hi, I noticed recently that my touch screen of my T450 does not work.

    Also on my computer properties it says that there is no available Pen/Touch input.

    Sometimes it appears and still does not work and most of the time does not appear.

    Is there some sort of diagnosis or procedure to check whether it is hardware or software problem?

    I guess I found the problem.

    It's the same problem with other models and it seems that it is a compatibility issue by combining touch screen + smart card reader.

    https://forums.Lenovo.com/T5/ThinkPad-T400-T500-and-newer-T/T440-touch-screen-is-not-working-with-SM...

  • HP iq504 smart touch

    I tried to use my smart touch months ago and it did not work properly so I did system restore, but during the restoration, the power went out. Now when I restart the smart touch, it loads windows and then goes straight to a blue screen. There is only a cursor in the middle. I ran some diagnostic tests and everything has extracted o.k. tried to start in safe mode and it says: in each corner of the screen, but no safe mode toolbar or Windows is available. Just a black screen blank with the mode without failure of words. I tried to restart the computer for the last known successful startup and it's the same as before, the charges with a blue screen. Can someone help me? Thank you.

    Hello @otown59,

    Thank you for the updated information. I'm you provide a document from HP support: get a USB HP recovery disc or HP recovery disks, allowing you to get your recovery media if you do not have everything as I doubt F11 will work for you at this stage. If this does not work all the better, but if follows does not only document and it will guide you on how to get your recovery disc.

    I am also a you provide a HP support document: performing a recovery of the system (Windows Vista) HP, which has all the steps that you need to recover your computer.

    I hope this helps. Thanks for posting on the HP Forums. Have a great day!

  • touch screen not responding do not in the iOS 10

    Hi all

    I use 6 and recently upgraded iPhone upgraded to iOS 10.

    I started having some strange behavior on my iPhone the day where I put on level to iOS 10.

    My iPhone touch screen is not responding properly. Sometimes I need to wait a minute for a touch of answer, and sometimes it does not. Sometimes, I need to extinguish it with force my phone.

    I never had a single problem with my iPhone 6 before and I think that it happened only after I upgraded to iOS 10.

    I tried to reset the phone and also the factory reset but no improvement.

    Any solution please.

    Thank you.

    Ratna

    Hello

    I'm having the same problem. The 'funny', it's that I have used the last two betas public iOs 10 and did not notice the problem, it seems to have started with the 10.0.1 release official. I tried version 10.1 beta, but the problem persists. Yesterday I went back to iOs 9.3.5, and the problem did not go so far.

    Best,

    Stefan

  • touch screen unresponsive - occasionally

    touch screen unresponsive - occasionally

    iPhone 6 on June 23, 2016 reseller apple Local; I have a touch screen is unresponsive on my iphone 6. Sometimes, he will not respond to the touch (that is to say open an app, type messages or emails, etc, etc) is maintained with the supplier and not a necessary reset, but still problem continue and get the verse. I just wanted to know if anyone else was having this problem...

    Hello

    Follow the steps here, including Organisation of service if necessary:

    If the screen of your iPhone, iPad or iPod touch does not respond to the touch - Apple Support

  • Apple Watch with broken touch screen

    Hello, community.

    I bought my 42 mm watch with stainless steel on January 4, 2016. And a few weeks ago I damaged it accidentally. Him came bracelet cancelled and the watch fell to the ground. Thus, the glass is broken. Touch screen works, but the broken glass is too high and can damage the fingers.
    On 7 September, Apple announced a new series of Apple Watch 2.

    Is it now possible to give them my watch, pay with a discount and make a NEW APPLE WATCH Apple Watch 2 series, or new sport? without a bracelet, that a case is necessary.

    Hello

    Apple does not currently offer a program of recovery for Apple Watch, whether in work or damaged condition.

    For compensation for your damaged watch, contact the Apple Support (mail service may be available) or make a booking Genius Bar to establish your available service options, the likely time and cost:

    Prices for the United States information service, for example, are available here:

  • My touch screen does not work.

    My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

    The following information is taken from the HT201406 of the Apple KB article:

    If the screen of your iPhone, iPad or iPod touch does not respond to touch

    If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

    Check your touch screen

    Make sure your hands are clean and dry, then try the following steps:

    1. If you have a case or a protective screen on your device, try removing it.
    2. Clean the screen with a soft, slightly damp, lint cloth.
    3. Unplug your unit.
    4. Restart your device. If you are unable to restart it, you can force restart your device.

    If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

    Adjust your settings for tactile 3D

    If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

    1. Go to settings > general.
    2. Click Accessibility > Touch 3D.
    3. Then set the sensitivity of the setting.

    Get more help

  • iPhone 6plus iOS 9.3.5 since the last update my touch screen is freezing. Has yet to be decided. Connection to the computer did not help. I had to wait my battery died to restart. Once restarted I could use touchscreen but it now

    Aggravated with the update from my iPhone

    It is a list of the problems I have with my iPhone 6plus since updating to IOS 9.3.5.

    1. A single date after update my touch screen froze and I was unable to trouble or to use until the battery died and the phone has rebooted.
    2. Since this restart my touch screen hangs for 5 minutes at a time at least 5 times per hour.
    3. My screen goes completely black 20 seconds in the reading of an article. I have to refresh my browser at least 6 times by reading an article on the web.
    4. If I'm in iBook I can't read yet a page without the screen goes black. I hit the home back to iBook button try to keep reading where I left off the coast, but within 20-30 seconds it goes back to black.
    5. While I'm typing, even this message, I hit the button of the space and the words are charged or inserted which does not appear. I myself taking much time to type anything bc I have to go back and get rid of the words that the phone has decided to him only to change or insert.
    6. Improvements that never going to this last day f__d my phone. Difficulty what you did in the last updated bc I will eventually lead to an Apple Store and throw the phone home.

    What have I tried to fix it. Everything. For many in the list and you already know what the normal things are that the average person would be difficult it phone. I have no problems until I updated to iOS more recent so caused my problems of telephones you people. PLEASE FIX NOW

    Thank you

    Debbie

    I posted my severe issue with the iphone since the last update August 28, 2016 at 12:27 and watch to see when your system has declared that I posted my question that I call a problem so I guess you can add that to my problems too. OH nothing automatic record is

  • my iphone 6 more screen sudeenly Gets a little blurry. touch screen does not

    Hello team,

    I bought the Iphone 6 more. that worked very well the last 6 months but suddenly I see that the LCD is completely blurred. touch screen works not. even when I am clicking on the home button or the sleep nothing works. After clicking the button sleep repeatedly the screen starts to work. It's really me trouble because I'm not able to receive the phone several times. Can someone help me if this is a known issue and what is the solution for this? just a heads up that there is no coincidence.

    Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

Maybe you are looking for