Smartphone blackBerry 8700g: latest firmware?

Similar Questions

• Smartphone blackBerry 8700g error message 517

  Can someone help and advise what means the error message - had this yesterday on my 8700g after answering a call.

  "JUM'A 517 ERROR."
    
  RESET

  The screen is completely white after clicking on the reset button several times it always comes back to the same error message as above.

  Concerning

  Syed

  Check with you carrier on the availability of the device of OS updates. Download the update to your computer.

  Check below the steps for the upgrade of the OS-

  Step #1

  Before you begin, make sure that BlackBerry Desktop Software is installed on the computer.

  Step #2

  Make sure that you have installed the software for device updated on your computer. Visit this link to get the software for device update the carrier OS download site.

  Step #3
  

  Users can perform a full or selective data backup by using the tool of backup and restore in BlackBerry Desktop Manager using the following steps:

  1. Connect the BlackBerry device to the computer that is running BlackBerry Desktop Manager.
  2. Open BlackBerry Desktop Manager.
  3. Double-click on the backup and restore.
  4. Select backup to perform a full backup or select Advanced to make a backup of specific databases.
  5. Choose a location to save the backup file, and then click Save.

  Step #4

  To perform a clean installation of the BlackBerry Device Software, do the following:

  1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
  2. Double-click The Application Loader icon.
  3. Click Next to start the installation process.
  4. Type your BlackBerry smartphone password, if prompted, and then click OK.
  5. Click on the checkboxes corresponding to the names of the applications you want to load, and then click Next.
  6. Click Advancedand then click the check box next to delete all already installed applications.
  7. Click on Next.
  8. Click the check box next to do not automatically back up the application during the process of loading data.
  9. Clear the check box next to the backup and restore applications installed wireless.
  10. Click Next > Finish.
  11. Once the process is complete, the load succeeded message. Click close to return to BlackBerry Desktop Manager.

• Smartphone blackBerry 8700g - record phone messages?

  Hi-

  I love my 8700g (I know - Old Style!), but wondering - is - it possible to record telephone messages, another only by clicking on "SAVE the MESSAGE?

  I've done a few times, and the messages were saved, but then mysteriously "disappeared" (I'm sure that there is a limit of 30 days or something I don't know).

  My RS is in Iraq, and I want to save her phone messages I can hear her voice... but some of them have disappeared "in some way.

  Thank you in advance, Oh BB geniuses!

  Pamela

  Pamela, Hello and welcome to the Forums of Support BlackBerry.com.

  How long your voicemail messages is preserved, is a service and the service of your operator, not the BlackBerry or the RIM. These message records are NOT stored on the device, but on your company's servers.

  Some will allow to the various save lengths. Some you can listen again and re - save and extend the deadline.

  Thus, a precise answer to your question must come from your provider.

  In the meantime, you can use a like YouMail voicemail service, which will ALSO send you a data file saved from your voicemails received... you can keep forever.

  Discover YouMail.com

  What is "SO"? Son, boyfriend girlfriend?

  Please thank him for his service to me and our country.

• BlackBerry Smartphones BB Bold New Firmware, is this necessary?

  Hello BB Fellow users, I just got my first BB and it is a "BOLD". I wonder if its necessary to get the latest firmware. It's my first smartphone, I'm really scared to start messing around with programs not to mention its firmware. Is there a link where I can useful updates as Office Manager?

  Thank you

  Yes. I'm on the last v4.6.0.154 and rumors are another release will be released next week.  There are several problems with the current version (for example) when, in an area with coverage 3G, the device fall in EDGE network and then slide the system completely... also many reports of calls dropped... so either reactivated to GSM on BOARD and then at 3 .ince g. is the attempt of RIM frist to a 3G device, Yes, stay in the running.  Using Blackberry Desktop Manager (required) v4.6 with this device allows a full backup and restore of settings and configurations that you have before you.  Hope this helps, it's painless to upgrade of the modules on the device.

• BlackBerry Smartphones BlackBerry Curve 9220 - ERROR - afret 7.1 update latest OS

  The OS current Smartphone blackBerry 9220 installed is 7.1 Bundle 1137 (v7.1.0.337, platform 9.50.0.28).  I wanted to update through Blackberry Desktop Software the last beam 7.1 2102 (the version I think is v7.1.0746) (not sure if this correct). After that, my smarthone displays "ERROR 507",

  Then again, I'm getting off 7.1 Bundle 1137, my phone works again...

  I tried again to be updated for the latest OS (the one who recommends the Desktop Manager), after long hours of waiting, my phone ERROR 102 poster... then I downgrade again to the lower version, which is 7.1 Bundle 1137, PLEASE HELP me HOW AM I going TO update MY OS to THE LATEST VERSION OF 7.1 BUNDLE 2102...

  Error 507 means that the device doesn't detect any operating system installed on the device.

  See the link below to download it and follow these simple instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  VIA | JSanders

  http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/error-507-reload-software/m-p/1477...

• The latest OS Smartphones blackBerry for Blackberry storm 9500

  I want to upgrade my blackberry OS 4.7. I want to know that the latest OS available for my BB and the yo link download it.

  When I do the through BLackberry desktop manager it's showng OS 4.7 Bundle, what kind of OS is this?

  Hello and welcome to the community!

  To add to the above, you will need to override the methods "automatic" which will use the foregoing. Left alone, the "automatic" methods will offer only you OS packages sanctioned by the carrier for which your BB was built (under the VendorID on the device). But, you are not limited only to those... the easiest is, on a PC (you can not do on MAC):

  1) uninstall all the BB OS packages from your PC,

  (2) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/apps-software/desktop/?lid=us:BBsoftwareesktopSoftware & Cal = us: bbsoftware

  (3) download and install to your PC, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • You need to dig through this portal to find carriers that support your model but also to compare their different OS packages that are available.

  (4) If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  Do not forget to save.

  Note that if you had to make a special "tricks" for your BB to function initially get on your carrier (for example, your BB model no is not natively supported by your carrier system), then this process will wipe those out, and you have to make them once again after it's over. Before starting, so 100% certain that you know what these "things" have been and are able to do it again.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones Blackberry Priv bricks during update MM

  Hello everyone,

  As a user of BB for a long time (since the curve 8310 until the Passport), I couldn't resist the temptation and I ended up buying a private AT & T unlocked the B & H store in Manhattan during my vacation.

  As soon as I come home in Spain, I started the MM updated procedure with an autoloader, according to the following instructions: http://global.blackberry.com/en/support/smartphones/blackberry-PRIV/reload.html

  I downloaded the SW AAF355 version and drivers USB (computer restarts after the installation).

  Installation script has detected the Priv in fastboot mode after lowering the volume + key combination of power and apparently started the update, but suddenly the phone restarted with black screen and led flashes between purple and green.

  Quick notes: I've updated devices BB10 via autoloader a couple of times and I did the update did not complete successfully using Mac OS (latest version), but I tried tha same procedure from a W7 PC too.

  Now, I'm still stuck with black screen and led flashing and computer does not detect the phone more. I tried all combinations of possible keys try to restart the phone but no luck.

  So I ask help to members of the community on what can I do to get it fixed, cause I think that the problem of Mayor is I'm in Spain...

  Thanks in advance.

  OK, it seems that I finally I could remedy then I'll write the steps that I followed, just in case.

  In my case, I was not able to start the phone in following mode fastboot with all combinations of keys, and the computer it has not detected:

  -Low volume + button.

  -High volume + button.

  -All buttons pressed at the same time.

  But after some trial and error, I pressed the middle (the toddler between flight up and down) button + power button and the phone started in mode 'starting'

  The computer detects it and loaded MM autoloader (first attempt get stuck again, but a 2nd went until the end). After that the phone boot up normally.

  Thanks to all the members of the BB community and have a nice day!

• BlackBerry Smartphones blackberry 9000 mds on server and the device (mds control center)

  Hello

  I have the following problem. We use the SDM Service on the server to push the software programmed on a few blackberrys (e.g. 8800). All Blackberrys are saved on the server in the list of mds.

  The new Blackberry 9000 does not appear in the lists of mds. And after the activation of the SDM control center is not on the device. the control center of mds push automatically by group policies. but I can't found on the device. How can I make the blakcberry 9000 working with SDM on the Enterprise Server BES services?

  We use the 4.1.4.15 version.

  I'm sorry for my English. IM German.

  Thank you.

  !! UPDATE!

  I had a contact with level 2 Support T-Mobile. They told me to download the latest firmware to the updatecenter of t-mobile (has not heard of so far), then install this software on a PC and install the MDS Runtime of this package to the devices.

  After the url of the download location, where I found the firmware:

  http://updateservice.t-mobile.NET/BlackBerry/download/download.do?ref=%2Fservices%2Fftp%2Fproftp%2FS...

  --> Download

  --> Installation for PC

  --> Start the Desktop Manager

  --> Connect Blackberry "BOLD"

  --> uninstall all the "fragments" of MDS duration of unit

  --> restart the Blackberry device

  --> Install MDS DURATION & MDS default Launcher (V 4.6.0.13)

  --> Restart device

  You're good...

  The "BOLD" today BBlackberry is a device registered and within seconds all of our MDS applications when pushed to the device and work perfectly.

  I hope this will help you too.

• BlackBerry Smartphones BLACKBERRY BOLD 9900 TERRIBLE AUTONOMY

  Hi Blackberry members, after having tested several of the many features like WP Mango, Android & IOS I decided to return to Blackberry as my primary communication devices.  The camera is great, but I must say that the battery life and the lack of auto focus is worrisome.

  Understand the camera hardware can not be changed at this time. The battery issue is however concern development when this device is used for everyday professional use.

  The phone was bought new dated 02/04/2012 and the phone was fully charged overnight before using it. I started using the phone at 7:30 and 10:30 the battery was 50% with not much activity. Other than the configuration of e-mail accounts and sending SMS x 3.

  I have updated the phone to the latest firmware and I can confirm that there is no change in the life of the battery either. Indeed used blackberries in the past where the battery life was great. This model raises questions about which can drain the battery so quickly.

  I'm looking for a community of entry to gather an understanding of what needs to be done.

  See you soon

  Thank you. I've updated the operating system and the battery life is a little better. But as I have no WiFi, Bluetooth or GPS concerns me that autonomy will continue to be a problem.

  I close this now and will monitor more and raise a new position according to the needs. Thanks for your comments.

• Problem with icon disappears blackBerry Smartphones Blackberry Bold 9780

  Hello

  I hope one of you whistle may be able to help me.

  I have a Blackberry Bold 9780, I use v.6.0.0.294 on o2 to the United Kingdom.

  Last month, I noticed problems. I can't tell you what icons disappeared first, but certainly Blackberry App World was among the first to disappear, my phone lock has now gone although I can search it and its actually hidden, it will not display...

  App world Blackberry does exist at all on my "BOLD" and even when I downloaded it again, it will not appear.

  (not sure if there are other icons missing these are the only 2 that so far, I've noticed)

  He said: I'm running the latest version of the software, so I don't understand what is happening.

  I rebooted several times, no luck.

  I've been in the Blackberry menu and looked for a way to display my lock icon and it won't.

  No matter what valued Advisor,

  Thank you!

  Hi Mononoke,

  Cause 1

  4.0.0.63 to 4.0.0.65 on a BlackBerry 6 smartphone with BlackBerry Device Software more updates to blackBerry App World.

  Resolution 1

  The BlackBerry OS 6 versions prior to 6.0.0.706 and global icon is not visible, please download and install the BlackBerry App World 4.0.0.55.

  1. Open the BlackBerry browser on the BlackBerry smartphone.
  2. Go to http://mobileapps.blackberry.com/devicesoftware/entry.do?code=appworld3
  3. After downloading, please reboot your BlackBerry smartphone when you are prompted.
  4. Check that BlackBerry App World is located on the home screen.

  Smartphones blackBerry 6 with a way to upgrade to BlackBerry OS 6.0.0.706 or later should upgrade to the latest version of BlackBerry Device software available in the wireless service provider so solved several problem with BlackBerry Balance.

  The BlackBerry OS 6 versions 6.0.0.706 and higher and the global icon is not visible, please download and install the latest version of the BlackBerry App World.

  For more details see the KB articles below-

  • KB29422 BlackBerry App World icon is missing after upgrade to BlackBerry App World 4.0.0.63 to 4.0.0.65

• New Smartphones blackBerry tour need help!

  I bought bellshare buzz berry and when I try to record sound telling me that my code is invalid I do also I've been trying to customize the sounds on my Tower rather than create a whole new profile is possible on the tour, I have been able to customize and edit them on the Pearl but noticed on the tour that you can't or perhaps its my phone please someone help

  First of all, I would contact BellShare for support of their application.

  For the issue of profiles, it is a bit different for the latest operating systems.

  KB16476 How to change a sound existing profile on the smartphone BlackBerry Storm and BlackBerry Tour 9630 smartphone
  KB16477 Create a sound profile for a specific contact on the smartphone BlackBerry Storm or BlackBerry Tour 9630 smartphone

• My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... .etc

  My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... etc I tried everything. He used to work on Window Vista and a few old iTunes. I've updated to iTune and move to Uverse. It has stopped working. I thought the problem was iTunes so I've updated to the latest version of iTunes in Vista, then update to Vista and then install Windows 7 and then last iTune on Windows 7... I now have everything that the most recent and it still does not work. I have not the firmware on my router can be updated, but I think it's fairly new

  There may be a setting on your router you can disable IPv6.  Try this and also disable IPv6 on your NIC again.

• Where can I get the latest Firmware UJ - 822S for Portege S100?

  I'm looking for the latest firmware for this drive. The drive came with the Portege, and I know that they are specific OEM. There are later versions of the firmware available on other sites of manufacturers, but these will be simply screwed to the drive. I'M NOT AFTER RPC-1 firmware, just the last available if possible.

  Thanks in advance,

  PoB0782

  Hello

  Is there a special reason why you want to install new firmware, maybe some problems burning?

  I put t know where you can find the latest firmware for this phone, but if you Google a bit you will find many forums, such as http://forum.rpc1.org/.

  You will find useful information and comments about the firmware and the results. I just want to say that you should be careful about this. I put t know how old your unit and if the warranty is still valid, but please note that, after the installation of the firmware non-Toshiba, warranty for ODD will be lost. In the case of the STRANGE is defective it is not replaced.

• Where to download the latest firmware for Toshiba TL938G

  Can someone give me a link where to download the latest firmware for TL938G?
  I want to update with USB

  Thank you

  Hello

  Have a look here:
  http://www.Toshiba-OM.NET/firmware.php

  + The message was edited: link has been removed.

• Cannot find the latest firmware for the Toshiba 40TL838G

  Hello

  I am trying to download the latest firmware for the 40TL838G model, but I'm not.

  Where can I find it?

  Thank you.

  The same has been asked in this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914

  We can receive the update only via a network update
  In which case you will not receive updates via the network, your firmware is up to date.