SmartView 11.1.2 cannot connect to Shared Services
I posted this thread in the forum of essbase, also...I installed 11.1.2 on Windows 2008 (64-bit) standalone. I also Excel 2007 is installed on the same computer. I took all the default ports when configuring the server instance. I installed SmartView(32bit) on the same computer without error. When I try to connect to "Shared Connctions" through the SmartView home window, I keep receiveing an error message: "failed to connect to the Shared Services Error Message: ' cannot connect to the provider." The server name cannot be resolved. "I tried to change the name of the server with its IP address, I tried all the typical ports; but can't seem to solve the problem. My URL reads as follows: "http://testsys:13080 / work/SmartViewProviders space ' I have a 11.1.1.3 instance on another server works fine, but the URL is slightly different (http://server:13080/aps/SmartView).» I have tested and confirmed that all shared services are running and can be accessed from the Regional service console or a web browser. Any help would be appreciated.
Connection via URL http://
Tags: Business Intelligence
Similar Questions
-
Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.
Original title: Windows Store-downloads
Try the troubleshooting steps below after completing the methods provided by Vinodh.V
Method 1: Make sure that the Date and the time is accurate
Open quick run (Windows key + R)
Type timedate.cpl , and then click OK
Click the Internet time tabClick change settings
Click update now , and then click OK once the time is Sync
Method 2: The problem may be caused by the Proxy settings
If you use a Proxy
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Of that type the below command and press enternetsh winhttp import proxy source = ie
If this does not work, you can reset the proxy settings using below command
netsh winhttp reset proxy
3:Fix Windows Update method
Running Windows Update troubleshooting tool can solve some problems.
Open Control Panel
Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view
Select the fixed problems with Windows update.
Select Next and then click Finish when the process is complete
Method 4: Search for the latest Windows updates
Open quick run (Windows key + R)
Type wuapp , and then click OK
Click check updates
Download and install all pending updates.
Restart the computerMethod 4: perform the Scan SFC
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Type in the command, and then press on enterSFC/scannow
Method 5: Upgrade to the Local account and switch it to the Microsoft account
To switch to local accounts
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click on your account
Click Disconnect
Enter the current user password and click Next
Click sign out and finishing
Log on to the user accountTo switch to the Microsoft account
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click to connect to a Microsoft account
Enter the current password
Enter the password of the Microsoft account and click Next
Click switch -
HP Color Laserjet M177FW MFP PRO cannot connect to web services
I bought a HP Color Laserjet M177FW MFP PRO today and took me to the top. It can print and scan over wireless network. However, it cannot successfully connect to web services. I put the DNS numbers with google DNS addresses. I changed his IP address with manually. The IP address is unique. Normally it is not activate/remove webservices. But when I restart it, it can do for a few minutes. It may take an e-mail address, but it does not print any information sheet. When I try to print a sheet it says "Connection problem" in the first minutes, and later, he said "Connecting" and he expects, there is no error message. What am I supposed to do? Please help me.
First of all thanks for your help. I solved my problem. After that I sent this message that I've updated my firmware printers and that does not solve the problem. I called HP customer service and they help me. We have solved the problem. My router was the reason for my problem. When I reset to factory settings, the problem disappeared. Thanks anyway. I want to share my solution. Maybe it helps others.
-
My gadgets 'cannot connect to the service.
My gadgets (weather, etc) stopped working for "cannot connect service. IE is online, Internet works fine in any browser. I tried to disable, emnable, restart - nothing works.
Update:Microsoft has DISABLED the weather gadgets and currency via a recent update of security, because of worries about the vulnerability associated with these gadgets running on your computer. You can read more here: http://support.microsoft.com/kb/2719662 . Adjust the settings of your computer and all these other 'suggestions' people are, will NOT work. The function has been REMOVED from the operating system. It has also been removed from Windows 8 operating system. There are "theorists" who agrees that there is a security problem in the gadgets or Microsoft just doesn't support gadgets (usually from third party software) and has therefore disabled them in Windows 7 and eliminated in Windows 8.Thanks to DaveNYC for the Info. Pass the word, because a lot of people is facing this problem just like you. -
How to connect Essbase/Shared Services 11.1.1.1.3 to LDAP
Hello
I just installed Essbase 11.1.1.1.3 with Shared Services. I never have it connected to a corporate LDAP environment before. I remember the last version 6/7 etc... There was a CSS file that need edited. Is that still the case or do I have to go in Shared Services and configure etc...
Thank youHello
Configure you everything through shared services, have a read of:-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/ch05s05.html
See you soon
John
http://John-Goodwin.blogspot.com/ -
HP ENVY 5660: My printer cannot connect to Web services
Hello
When I tried to implement Web Services, I got an error.
The error is "server problem. The printer could not connect to Web Services. The server may be busy or temporary unavilable. Try again later. »
I am connected to internet (WiFi) and the Internet connection is not a problem. I had this problem for 2 days. I would be grateful any advice.
Thank you.
I've done your instruction, but I always had the same problem. However, after I print web access test report has changed the date on my printer, and auto power off is activated, my printer could somehow related to web services. Thank you very much for all your advice!
-
Guest account cannot login and cannot connect to the service of sense
I'm usually the only one who uses my computer, but recently a friend wanted to use so I set up an account invited - or tried! Everything seemed normal until she went to open a session and he said that she could connect to the service sense? and contact the administrator. I don't have any idea of what it is or means only that the acct of comments are not accessible. I am tired of looking in Help and support, and then nothing. I appreciate any help anyone could give me.
Thank youLindaOK, try the steps below:
1 - Login to your account
2 - Win Key + R to open Run
3 - Type services.msc and press enter
4 - find "System Event Notification Service" and double-click it.
5. now in front of Startup type , see it is set to Auto or select "Auto".
6. now go to ' theRecovery tab' in front of 'first failure' 'set'restart the Serviceand verify that this is the same in Second Doctor too. Do not touch "subsequent failures."
7 - click on "Ok" and reboot your PC.
I hope this help you.
-
Short Studio 3.0 cannot connect to the Service Provisioning
Hello!
After installation short 3.0 on Windows 2008 R2, the only box with Tomcat for the Studio, entering into the JSON string into the studio for Provisioning service, all I get is "Unable to connect to the Service of supply".
String in JSON format:
{
"port": "8881."
'server': 'localhost '.
}
I can connect in console Weblogic (localhost:8881 / console) for commissioning without problem and the green box appears with health = ok.
Any ideas on what could be causing the problem?
Thank you!
Gordon
It seems you are trying to use unsecured communication (non - SSL) between the Studio and the commissioning Service, but your configuration maybe isn't correct. See the following: http://docs.oracle.com/cd/E39271_01/studio.300/studio_install/toc.htm#Configuring%20the%20Provisioning%20Service%20for%20non-secure%20%20%20communication.
In particular, ensure that in your plan, the value of the variable transport-guarantee is 'NOTHING' and the value of the protected-url-pattern variable is ' / DISABLED ". If these settings are not correct, you may experience the problem you are experiencing. Note that the case is important.
RLJII
-
Cannot connect home sharing on iOS on iPad Air2 9.1
Using iOS 9.1. Works great on iPhone Home sharing 5s and 6s. Now, suddenly, I can not connect to home sharing on iPad Air2. Says "unable to connect to the share of the House. I rebooted, signed out and back in home sharing in settings/music, reset network on iPad and rebooted the modem/router. I'm sure that I'm on the same network and the rest of the iPad seems fine.
Called Apple and they seemed puzzled. Backup only I have is since this morning, after the problem started. I have a Time Machine backup, but no idea where to look for old backup iPad.
Anyone?
Problem solved by me. All I had to do was restart iTunes and everything works. Simple!
-
"Windows cannot connect to the service user profile service.
SOMETIMES, when I log onto an account says "unable to connect to the user profile service service." When I log into an administrator account, it displays a black screen and an error that says that my office has been denied access. It began quite recently after I transferred all my gear in a new case. I don't know if this has something to do with it. I spent hours researching this and I can't find a way to solve the problem. Help, please!
Hello
Since you don't have any attempt to Restore Points tapping F8 you can start and select last known good configuration
Configuration.-----------------------------------------------------------------------------------------------------------------------
If that doesn't work try these - such as using Safe Mode ADMIN and/or the hidden ADMIN account.
Even if these aren't exactly the same methods please check solutions.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx=================
If necessary:
Make sure that all Windows Services are set to default values.
Start - type in the search box-> find Services at top - double click.
BlackViper - Services (value all default values)
http://www.blackviper.com/WinVista/servicecfg.htm=================
You might what to do that - an InPlace upgrade/repair facility that helps keep the
programs and data backups redundant but are always a good idea.You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
10 Blackberry Protect BlackBerry cannot connect to the service of error on BlackBerry Classic
Unable to connect to the classic BlackBerry Protect on BlackBerry service after the upgrade of the OS for OS 10.3.1.2072 10.3.1.1154 flows. The problem is not resolved even after upgrade to the latest official OS version 10.3.1.1581. Someone at - it experiienced this problem and is there a solution?
Thanks for your reply and information about BBOS and BB10 users affected by the issue of BlackBerry Protect service. However, I have since effectively solve the problem with an intuitive understanding and a little help from Crackberry.com. Before checking your answer, I saw a comment written by Blaize the Crackberry.com about users who purchased devices BB ShopBlackBerry or Amazon, but have not yet received the recent BlackBerry 10.3.1 update. Referring to a display on Twitter by Michael Clewley @MichaelClewley the following procedure has been proposed "Power off, remove the sim card, restart WiFi only. Look for the updates. Power off, re - insert sim, continue. "On a haunch, I decided to use a procedure similar"turning the unit off, remove sim, restart with WiFi on and then turn it on BlackBerry Protect. To my astonishment, BlackBerry Protect service was restored. Finally, put off, re - insert sim, check the BlackBerry Protect service to check the condition of the remains on. Success!
-
Friends,
Looking for a way around the SSO and newspapers in shared using the Native sign-on admin Services. We have recently added a useer for MSAD authentiation directory. We want to change our configuration, but cannot connect to Shared Services
Thank you!
Yes, it is stored in the registry of the EMP, so it can be changed.
It is under the WORKSPACE_LWA and the property is AllowDirectLogonAfterSSO
See you soon
John
-
Cannot connect my bing Facebook app
I can't connect my Bing app in Windows 8 for my Facebook to earn points for my bing rewards. I get a cannot connect to the service message.
Hey Kevin,
If it works well before?
Let us check if this problem is related to the application of Bing. Open Internet Explorer, go to bing.com and connect you to Bing rewards and check if it works.
If the problem is specific to Bing app, you can check if the application has a problem. Follow the steps in the link.
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
(Please make sure to run the troubleshooter App from this link)Let us know if it helps. If the problem persists, please answer, we will be happy to help you.
-
Server copy of the images between devices - break Shared Services?
Upgrade to 11.1.2 and servers pass test to the production environment. We want to configure MSAD with Shared Services and fixed deposits on our shared production SQL Server.
Our final goal is to copy the image of the 11.1.2 servers (not the shared sql server) and turn it on newer hardware.
My concern is the properties/java files that can hard-code the static information that may exist on the original farm.
No matter who with 11.1.2 makes a picture to another server hardware and has experienced problems of connectivity to Shared Services or repositories?
JTSIf everything has been recorded against the name of the computer, then in theory, you should be fine if everything else is to stay the same, it should allow IP address changes.
I know that in the early days of the system 9 he had some problems with the IP being stored, but it should not happen now.
Although I cannot give you a 100% guarantee because there is no guarantee with 11.1.2See you soon
John
http://John-Goodwin.blogspot.com/ -
Oracle EPM rel. 11.1.1.2 system - Assign Essbase filter shared services
Hello
I set a filter Essbase and created a user with access filter in Shared Services.
Now, I want to assign the Essbase filter that is created for the user.
If I call the menu item 'Open' on a group of Shared Services applications I get an empty window.
If I call the menu item "Assign Access Control" for the Essbase Application I get an error message (web page cannot be opened).
Can anyone help?
OS: windows
Internet Explorer: Version 7
Java: Build 1.6.0_12 - b04
EPM system: 11.1.1.2
Best regards
NicoleHello
Disconnect from shared Services
Go to PARTY, select one of the application, with which you have a problem, start the the right click 'register '.
Connect to Shared Services, now the "assign access control" should work for the application.Ok?
See you soon
John
http://John-Goodwin.blogspot.com/
Maybe you are looking for
-
How can I fix gmail on mail account
my gmail account sent or receiver. How can I re-do without losing all my old gmail messages?
-
Do you have a lottory service in your activities?
A friend received from Microsoft that he win in Microsoft lottory one a lot of us (250,000) and he has to go to Bamako in Mali for receipt. is this true? Do you have a lottory service in your activities?
-
How to export my contacts on my pc from a disabled internet Nokia phone?
I have a working phone, Nokia C5, without access to internet e-mail only sync. I'm laid off so need my contacts exported to my pc, so I can load it on another phone in the future. How can I do this because the instructions over the phone only you s
-
CD Rom drive not recognized of the games which are already installed.
Hi, I have a similar problem.But let's start at the beginning. About 5 months ago, I bought a game. It did not work properly. After a month without playing, I wanted to have fun again. And here it starts.I clicked on the game icon and the message "'
-
I can't get my HP model number 5515 printer to work
I did a system restore and I can't get my new 5515 HP printer to work, the problem seems to be that the computer and the printer are not in harmony with each other. I went to the HP guide to shooters of problems, but without success. I checked the co