SOA-infra & wsm - pm fail to start due to the exception of WSDL

Similar Questions

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

  Log name: System
  Source: Service Control Manager
  Date: 17/07/2011-21:12:53
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: ivan-PC
  Description:
  The BCM42RLY service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      203523
     
     
      System
      Ivan-PC
     
   
   
      BCM42RLY
      %%d Ko
   
  original title: can someone please help...

  Hello

  1. you are using a Dell computer?
  2. What is the model number of your computer?
  3. don't you make changes to your computer before the problem?

  BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  Uninstall or reinstall a device

• After the installation of 6 of Lightroom, it fails to start due to the fault of libcef.dll

  Had to reinstall Windows 7 (64-bit). After the installation of 6 of Lightroom, it will fail to start due to an error in libcef.dll.  Three event log entries are created, as indicated under my signature.  Can someone help me please?

  Thank you

  Jeff

  Name of the failing application: lightroom.exe, version: 6.0.0.10, time stamp: 0x5523190c

  The failed module name: libcef.dll, version: 3.1750.1805.0, time stamp: 0x53eb9d68

  Exception code: 0xc000001d

  Offset: 0x00000000020f5fa3

  ID of the process failed: 0 x 1280

  Start time of application vulnerabilities: 0x01d0cb85de3cf6e8

  The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Lightroom\libcef.dll

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  --------------------

  Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Adobe Photoshop Lightroom because of this error.

  Program: Adobe Photoshop Lightroom

  File:

  The error value is listed in the additional data section.

  User action

  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.

  2. If the file is still not accessible and

  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.

  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.

  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.

  4. If the problem persists, restore the file from a backup copy.

  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data

  Error value: 00000000

  Disc type: 0

  --------------

  Fault of type 166477209, bucket 20

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: lightroom.exe

  P2: 6.0.0.10

  P3: 5523190c

  P4: libcef.dll

  P5: 3.1750.1805.0

  P6: 53eb9d68

  P7: c000001d

  P8: 00000000020f5fa3

  P9:

  P10:

  Attached files:

  C:\Users\Jeff\AppData\Local\Temp\WER7B95.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\Jeff\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lightroom.exe_29c 7eed9d3cf76b21ad83d1fc4d12620f679d41d_13bebd46

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  State: 0

  Hi Jeffrey,.

  Please refer: " Lightroom 6 crashes when I try and open it."  Signing off CC does not help :-(

  I hope this helps.

  Concerning

  Megha Rawat

• Windows fails to start due to the registry error

  Original title: this is a double whammy.

  My windows XP crashed he keeps coming with the registry cannot load the hive (file0\systemroot\system32\config\software. I know there is a way to solve this problem through the reg change but do not know how. Also, I thought I could get around this by installing windows xp home edition on a different partition. the problem is that I forgot to put it as a dual boot. Now I have the same windows xp on a partition. Fortunately, we're on the C:\ drive and the other on the D:\drive. Help, please. Thank you

  What does 'crashed' mean to you?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  You will see messages like this if the file system is corrupt and XP just cannot play or read the file, then XP stops loading and complains.

  Rarely, it means that the file is really corrupted or missing (unless it happened by human hands).

  Run chkdsk /r from the Recovery Console XP will straighten the file system if nothing else is wrong and that I would always start by chkdsk/r when these types of messages are encountered.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk /r on your hard drives may solve your problem completely.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• The MCSTRM service failed to start due to the following error: the system cannot find the specified file

  My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

  What can I do?  I have Vista SP2 64-bit.

  I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

  Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

  Thank you

  Candy C:\Users\David> net helpmsg 2

  The system cannot find the specified file.

  Is that error on this post code, IE something deleted, probably your antivirus or you.

  For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll

  
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   
  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
    

• Event Viewer: Windows color system service failed to start due to the following error: the service did not demand launch or control in a timely.

  Whenever I start my Windows 7/64 on a motherboard Asus X 99 installation - WS pairs of the following event log entry are added in the journal of the repetitive events (12 times on every boot):

  ----------------------------

  -

  -

  7009

  0

  2

  0

  0

  0 x 8080000000000000

  38039

  System

  *******

  -

  30000

  Windows color system

  ----------------------------

  -

  -

  7000

  0

  2

  0

  0

  0 x 8080000000000000

  38040

  System

  *******

  -

  Windows color system

  % 1053

  ----------------------------

  What may be the cause of these event log entries?

  Hello

  Please keep us updated on the issue.

  To better understand Windows Color System, I'll refer to the article below.

  Windows color system

  I hope the information is useful. Feel free to write us if you have questions related to Windows, we will be happy to answer.

• I get this error message: Service Control Manager: The Genesys Logic USB Scanner controller NT 5.0 service failed to start due to the following error: the system cannot find the specified file.

  I get this error message (consistantly about every hour or so) and the computer crashes.  I suspect that it is looking for a file, but I can't find where the USP Scanner controller NT 5.0 would be installed.  Could it be part of the HP 6500 has Officet more pilots?  Thanks for any help!

  Hello John Wirkkala,.

  How long have you had this problem?  You still have the disk that came with your HP Officejet?  If this isn't the case, I've included the link below for the drivers and installation.  You have any other devices synchronize you with your computer via USB?

  If either reinstalling the device or updating the drivers is not a workaround, see the event viewer for the error log.  Please let us know status.

  Downloads of software & driver - HP Officejet 6500 a Plus

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=4083977#N295

  Event Viewer: how view and manage events records same observer in Windows XP
  http://support.Microsoft.com/kb/308427

• Windows Update fails because TrustedInstaller fails to start due to bad road cbscore.dll

  I get error 80080005 when you try to run windows update.  I followed this to the fact that the Windows Module Installer fails to start.  Using ProcMon I could find this TrustedInstaller.exe fails to start.  It is a failure due to the following:

  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND
  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND

  I searched and cbscore.dll is actually under:

  C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0

  I tried to understand where TrustedInstaller.exe gets the path for cbscore.dll, but I had no chance.  Can someone tell me where TrustedInstaller.exe gets this way?  Or, more generally, how can I solve this problem?

  Thank you!

  The McAfee free trial (which is preinstalled on the computer when you bought it) expires before you've bought & installed McAfee Security Center?

  Installed Updates lists the the system update tool... (KB947821)?

  I'm afraid things only left in my neck are (1) performs a thorough check of malware, (2) do a repair installation of Vista or (3) formatting the HARD drive & doing a new installation of Vista. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 8 KB3000850 update fails to update due to the corruption of system files in MSDTC.log

  Greetings,

  I seem to have a serious problem with corruption of system files. And before anyone suggests, I ran the SFC and MARIKEL, can repair corruption. Corruption occurs in the MSDTC.log file and causes the update to KB3000850 to not settle. I know that it is the source of the problem, because I checked in the CBS. I'll copy and paste the appropriate section below.

  2014-12-06 20:58:07, error CSI 00000f3a (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646929 # to Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile(flags_=_0,_handle_=_{provider=,_handle=0,_name=_("null")}, da = (SYNCHRONIZE |)) FILE_WRITE_ATTRIBUTES), oa = @0x5999ddd310--> OBJECT_ATTRIBUTES {s:48; rd:; on: [9] "MSDTC.} JOURNAL "; a: (OBJ_CASE_INSENSITIVE)}, iosb = @0x5999ddd3b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), his = (FILE_SHARE_READ |) FILE_SHARE_WRITE. FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE |) FILE_SYNCHRONOUS_IO_NONALERT | (0 x 00004000), eab = NULL, eal = 0, disp = invalid)
  [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3b@2014/12/6:11:58:07.232 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): native STATUS_OBJECT_PATH_SYNTAX_BAD error of the function expression Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile: (null)
  [gle = 0 x 80004005]
  2014-12-06 20:58:07, added CBS C:\WINDOWS\Logs\CBS\CBS.log WER report info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141202063835.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201150922.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201103812.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201075150.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201073551.cab info.
  2014-12-06 20:58:07, info CBS unable to add pending.xml to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  2014-12-06 20:58:07, info CBS unable to add pending.xml.bad to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  2014-12-06 20:58:07 info CBS not able to add SCM. EVM to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  2014-12-06 20:58:07, error CSI 00000f3c (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646928 # to Windows::Rtl:SystemImplementation:CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff:TransferFile(flags_=_(ReplaceIfExists|)) OpenForBackupIntent), op = 'HardLink' [8], o = NULL, oname = [l:18 {9}] "MSDTC. The JOURNAL", ndir = @0x59b6067e78, name = [l:18 {9}]"MSDTC. The JOURNAL", disp = (null))
  [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646819 # to CFileInstaller::DoComponentOperation (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646818 # to CFileInstaller::ProcessComponentChange (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646817 # PrimitiveInstaller::CCoordinator:ProcessChange(Change_6.3.9600.16384->_6.3.9600.17415_for_Microsoft-Windows-COM-DTC-Runtime,_pA_=_PROCESSOR_ARCHITECTURE_AMD64_(9), culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral) [gle = 0xd000003b]
  2014-12-06 20:58:07, CSI Info 000009 c 7 SMI primitive installer [completed]

  2014-12-06 20:58:07, error CSI 00000f40 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510400 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f41 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510399 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f42 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510398 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f43 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510397 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f44 (F) HRESULT_FROM_WIN32 (161) #4340661 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0x800700a1]
  2014-12-06 20:58:07, error CSI 00000f45 (F) HRESULT_FROM_WIN32 (161) #4016881 # Windows::ServicingAPI:CCSITransaction:ICSITransaction_Commit(Flags_=_47_(0x0000002f), pSink = NULL, disp = 0, coldpatching = FALSE) [gle = 0x800700a1]
  2014-12-06 20:58:07, error CSI 00000f46 (F) HRESULT_FROM_WIN32 (161) # 81441498 #4016880 by Windows::ServicingAPI:CCSITransaction_ICSITransaction:Commit(flags_=_0x0000002f,_pSink_=_NULL,_disp_=_0)
  [gle = 0x800700a1]
  2014-12-06 20:58:07, info CBS setting ExecuteState key: ExecuteStateNone
  2014-12-06 20:58:07, Pavilion Info CBS RollbackFailed setting to 0
  2014-12-06 20:58:07, info CBS Clearing HangDetect value
  2014-12-06 20:58:07, info CBS saved last overall progress. Current: 0, limit: 1, ExecuteState: ExecuteStateNone
  2014-12-06 20:58:07, info CBS configured poqexec of hanging from the SetupExecute.
  2014-12-06 20:58:07, info CBS Exec: restore operations because of a CSI pilot commit failure.
  2014-12-06 20:58:07, error CBS Exec: impossible transaction CSI hangs because transactions cannot be merged: 0 [HRESULT = 0x800700a1 - ERROR_BAD_PATHNAME]
  2014-12-06 20:58:07, CBS Perf info: all InstallUninstallChain.
  2014-12-06 20:58:07, Info CSI CSI Transaction 00000f47@2014/12/6:11:58:07.701 @ destroyed 0x59a2b9ab40
  2014-12-06 20:58:07, info CBS cannot run the chain of execution. [HRESULT = 0X800700A1 - ERROR_BAD_PATHNAME]
  2014-12-06 20:58:07, error CBS could not process the single-phase execution. [HRESULT = 0X800700A1 - ERROR_BAD_PATHNAME]

  In addition, my OneDrive has problems with commissioning. Stuck it doing. No idea if they are related. I tried to do a system restore to a restore point that several days ago, and he almost killed my computer. Somehow he damaged a file critical and would not start Windows, update the system would not work because it claims that the drive has been locked, he tried claiming my recovery media was not valid (it was originally windows 8 CD I used to install from), and finally I was able to get Windows to recover using the tool to restart system available on the CD. After reinstallation of updates, problems persisted. I don't know how to deal with this type of file corruption. Could someone please help.

  If you nead the SFCdetails, I can post them.

  I got exactly the same problem with the MSDTC.log. I finally just gave up any attempt to install the update. The tendency to blame the problems with this update on Avast (that I have not installed) have obscured the fact that there is something in this update that wreaks havoc on many computers Windows 8.1.

• Camileo S20 - saved file cannot be started due to the format error

  Hello!

  I have a problem here. The format of my camileo S20 is .avi, but when I try to put the film on a stick or a dvd and play it on my dvd player it will not start (error format), I changed the dvd drive and the same problem, I tried to make it .mpg, still no use.

  What can I do? Help, please.

  Can watch you if you connect cam to the TV directly?

• Re: Failed to start General on the Satellite A300D-158

  Sorry for my language, but that little bit difficult for me.
  After 2 years of using this cooler model and drive hard breaks down because of overheating. Generally, the system worked. After disassembly and replacement of cooler, I got new problem - system is not starting at all. Power and battery LED always indicates "supported", all caps to the motherboard are properly placed, graphics card connected correctly, too.
  After putting in the work of the indication for a few seconds, cooler rotation begins, but screen remains black and after a few seconds system stops.

  What can be graphics or Mo? Please advice.

  Who knows what you are doing... Again, check well all if all cables connected correctly.

  > After work indication start for a few seconds, cooler rotation, but screen remains black and after a few seconds system shutdown
  > down. What can be graphics or Mo? Please advice.

  If it's a problem of graphics card, the laptop is remained working with white screen. But in your case, it works for a few seconds and stops.

  > After disassembly and replacement of cooler

  Check if the Cpu is mounted well, I think it's a troublemaker. Replacing the fan could touch.

• Failed to start after installing the new memory module Equium A60

  I have an Equium A60 laptop with the following specs:
  P4 3.06 GHz
  256 MB Ram (including 64 MB ATI graphics card)
  30 GB HD
  Windows XP Home Edition

  The problem is the following; I bought a bar of memory in order to update my system. I bought a Kingston SO-dimm pc2100 512 MB. After installation of the memory of the laptop wouldn't start, after about 5 seconds after having turned it on, it turns off completely.

  If I remove the memory it starts up fine. I had tested memory and its ok so there seems to be a problem with the laptop itself. I'm confused, so if anyone has an idea of what might cause boot failure, I would be happy to know.

  Thank you very much...

  As far as I know the main reason for the failure of start is the use of non compatible modules.

  According to the specifications of the laptop, you must use PC2700 512 MB (PA3312U - 1 M 51). If you want to buy the module Kingston (products of very good quality) check it please the Kingston MEMORY SEARCH

  Good bye

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339